Overview
The MIP BYPASS1 STOP WASHERS (MIP19032) are essential spare parts for RC enthusiasts maintaining their 1/8th scale vehicles. Whether you're running a TLR or Hot Bodies 1/8th scale RC car, these precision-engineered stop washers form a critical part of the MIP Bypass1 damping system. If you're serious about RC car maintenance in the UK, keeping quality spare parts like these on hand ensures your setup remains in peak condition and performs exactly as intended. These washers are specifically designed for use within the MIP Bypass1 range, a recognised system used by competitors and serious hobbyists alike.
Stop washers might seem like small components, but they play a vital role in your RC car's suspension geometry and performance characteristics. Over time, even the most well-maintained RC cars experience wear on their hardware, and having genuine MIP replacement washers ensures you're maintaining the integrity of your damping system. Whether you're refreshing your setup after a season of bashing or performing routine maintenance between race meetings, these stop washers are the correct choice for authentic MIP Bypass1 performance.
For anyone building or maintaining a competitive 1/8th scale RC buggy or truck in the UK, the BYPASS1 system has become a trusted standard. These stop washers are the genuine article, ensuring your suspension geometry remains accurate and your damping characteristics remain consistent with the original specification.
Key Features
- Set of Four Washers — You receive four stop washers in this pack, providing enough spares for comprehensive maintenance or multiple vehicles running the MIP Bypass1 system, ensuring you're always prepared for upkeep.
- MIP Bypass1 Compatibility — These washers are specifically engineered for use within the MIP Bypass1 damping range, maintaining exact compatibility with the system and ensuring proper suspension performance without modification.
- TLR and Hot Bodies 1/8th Applications — Designed for use on 1/8th scale RC cars from TLR Racing and Hot Bodies platforms, these washers provide the correct fitment for these popular race chassis used throughout the UK RC community.
- Genuine MIP Components — As official MIP parts, these washers are manufactured to exact specifications, ensuring quality and reliability that matches the precision engineering of your Bypass1 damping system.
- Maintenance and Refresh Solution — Perfect for replacing worn or damaged hardware during regular maintenance cycles, allowing you to restore your suspension system to factory specification without unnecessary expense.
- Competition-Grade Spare Parts — Recognised by serious RC competitors and enthusiasts, having genuine MIP spares ensures your vehicle maintains its setup integrity throughout the racing season.
Technical Performance
The MIP BYPASS1 STOP WASHERS represent precision engineering at its finest for 1/8th scale RC applications. These washers are critical components within the MIP Bypass1 damping system, which has become the standard choice for serious 1/8th scale RC enthusiasts throughout the UK and internationally. The washers are manufactured from quality materials engineered to withstand the rigorous demands of both recreational bashing and competitive racing environments. Their primary function is to provide accurate spacing and positioning within the damping stack, ensuring that suspension geometry remains consistent and damping characteristics perform exactly as tuned. When washers become worn through use, they can affect suspension feel and response, making replacement essential for maintaining peak performance. The precision fit of genuine MIP washers ensures no gaps in the damping stack and no unwanted play in the suspension components. This level of attention to detail is what separates genuine competition-grade spares from inferior alternatives. Whether you're running on clay track, carpet, or outdoor terrain, these washers maintain their integrity and performance characteristics, supporting the overall reliability of your 1/8th scale RC car.
What's in the Box
- MIP BYPASS1 Stop Washers x4
Frequently Asked Questions
- Are these stop washers suitable for my 1/8th scale TLR or Hot Bodies RC car? — Yes, these washers are specifically designed for TLR Racing and Hot Bodies 1/8th scale platforms. If your vehicle uses the MIP Bypass1 damping system, these genuine MIP washers are the correct choice for replacement and maintenance.
- Why would I need replacement stop washers for my RC car? — Stop washers wear through normal use and repeated compression cycles in your suspension system. Over time, they can become compressed or damaged, affecting suspension geometry and damping feel. Replacing them restores your setup to original specification and maintains consistent performance.
- How often should I replace my stop washers? — This depends on how frequently you run your vehicle and the conditions you use it in. Heavy use requires more frequent inspection and replacement. It's good practice to check and refresh your suspension hardware at the start of each racing season or after extended bashing sessions.
- Are these genuine MIP parts? — Yes, the MIP19032 is the official part number for MIP BYPASS1 Stop Washers. These are genuine MIP components engineered to exact specifications, ensuring proper fitment and performance within the Bypass1 system.
- What is the MIP Bypass1 system? — The MIP Bypass1 is a recognised damping system used in 1/8th scale RC cars. It provides adjustable suspension tuning through a series of components including these stop washers, which play a critical role in maintaining suspension geometry and damping characteristics.
- Can I use these washers on other RC car brands? — These washers are specified for TLR Racing and Hot Bodies 1/8th scale vehicles running the MIP Bypass1 system. While the MIP Bypass1 system may be used on other chassis, these washers are optimised for the TLR and Hot Bodies platforms.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the MIP BYPASS1 STOP WASHERS, TLR / HOT BODIES 1/8TH (4) MIP19032 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Product Type: Stop Washers / Suspension Spares
- Brand: MIP
- Part Number: MIP19032
- Barcode: 691545190327
- Scale: 1/8th
- Quantity: 4 washers per pack
- System Compatibility: MIP Bypass1 damping system
- Vehicle Platform Compatibility: TLR Racing and Hot Bodies 1/8th scale
- Function: Stop washers for suspension geometry and damping stack positioning
- Use Case: Maintenance, repair and replacement of worn suspension hardware
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
