RPM Traxxas Slash 4x4 Rear Bearing Carriers Pair Upgrade RPM80732

Overview

The RPM Traxxas Slash 4X4 Rear Bearing Carriers (RPM80732) are a premium aftermarket upgrade designed for RC enthusiasts who demand durability and performance from their Traxxas short course trucks and buggies. If you own a Traxxas Slash 4x4, Stampede 4x4, Rustler 4x4, or any of the compatible Nitro variants, you understand the frustration of breaking parts during an intense bashing session. Stock Traxxas components, whilst reliable for casual driving, simply cannot withstand the punishment that hardcore RC racing and off-road driving demands. That's where RPM's engineering expertise comes into play, delivering a rear bearing carrier that maintains 100% stock geometry whilst introducing critical durability enhancements that keep your RC car on the track rather than on the workbench.

RPM has built a reputation across the UK RC hobby community for producing parts that last longer and perform better than their stock equivalents. Their rear bearing carriers for the Slash 4x4 and compatible vehicles are engineered with the same philosophy: take the proven design, identify the weak points, and reinforce them without compromising original geometry or fit. Whether you're a competitive racer, a weekend basher, or someone who runs their RC car UK-wide at various tracks and off-road venues, these bearing carriers will significantly extend the lifespan of your rear suspension and reduce downtime caused by component failure.

What sets RPM apart in the RC car market is their commitment to using proprietary nylon compounds that are virtually indestructible. These materials have been refined over years of real-world testing and feedback from RC drivers at all levels. By upgrading to RPM bearing carriers, you're investing in longevity, performance consistency, and the peace of mind that comes with their limited lifetime warranty against breakage. For anyone serious about their RC driving experience, these rear bearing carriers represent a smart, cost-effective upgrade that pays for itself many times over by preventing costly replacements of stock components.

Key Features

• Reinforced Ring Design — A rigid ring surrounds the bearing bores, providing substantially increased structural strength compared to the stock Traxxas carriers, ensuring the rear axles remain perfectly aligned even under extreme cornering forces and impact loads.
• Redesigned Camber Rod Mounting Boss — The mounting point for the camber rod has been engineered to disperse impact energy more evenly across the entire length of the carrier's arm, reducing concentrated stress points that typically cause premature failure.
• Precision Bearing Bores — The bearing bores are manufactured to exacting tolerances that hold bearings with zero play or slop, eliminating the rattling and imprecision that develops in worn stock carriers and ensuring consistently accurate suspension geometry throughout the life of the component.
• Reduced Axle End-Play — RPM engineers have reduced the axle end-play by approximately 1/64 inch, which keeps your rear end tracking perfectly and maintains the precise handling characteristics your RC truck was designed for without any lateral movement or sloppiness.
• Premium Nylon Construction — Built from RPM's proprietary blend of nylon compounds that offer exceptional impact resistance and durability, these carriers are significantly more durable than the standard plastic used in stock Traxxas components whilst remaining lightweight.
• Stock Geometry Compatible — 100% stock geometry means drop-in installation with no modifications required; these carriers work seamlessly with all your existing components, suspension tuning, and setup notes without any surprises.
• Direct Replacement Fit — Replace Traxxas stock numbers 1952 and 1952X directly, making installation straightforward for anyone familiar with basic RC maintenance and suspension work.
• Limited Lifetime Warranty — RPM backs their bearing carriers with a limited lifetime warranty against breakage, demonstrating confidence in the product durability and providing genuine peace of mind for your investment.
• Universal Compatibility — Designed for the Slash 4x4 but equally compatible with Stampede 4x4, Rustler 4x4, Telluride, Nitro Slash, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle and Blue Eagle LSII platforms, making this a versatile upgrade choice for multi-vehicle collectors.

Technical Performance

The RPM Traxxas Slash 4X4 Rear Bearing Carriers represent a significant engineering advancement in short course truck durability. Constructed from RPM's trademark proprietary nylon blend, these carriers provide exceptional impact resistance whilst maintaining the lightweight characteristics essential for responsive handling on UK RC tracks and off-road courses. The reinforced ring surrounding the bearing bores increases structural rigidity substantially, preventing the flex and deformation that causes premature failure in stock carriers. The redesigned camber rod mounting boss distributes force more effectively throughout the carrier arm, addressing a critical stress concentration point found in the original Traxxas design. Precision-engineered bearing bores eliminate any bearing slop—a critical factor for maintaining accurate suspension geometry and predictable handling throughout the component's lifespan. By reducing axle end-play by approximately 1/64 inch, RPM ensures your rear differential tracking remains perfectly true, which is essential for maintaining consistent handling feel lap after lap. The carriers achieve 100% stock geometry compatibility, meaning your suspension tuning, camber settings, and handling characteristics require zero adjustment when upgrading from stock components. Available as a direct replacement for Traxxas stock numbers 1952 and 1952X, installation is straightforward and requires standard RC tools and basic mechanical knowledge. These are sold as bearing carriers only; you'll need to source two 5x11x4mm bearings separately to complete the installation. The engineering philosophy behind these carriers—maintaining proven geometry whilst addressing real-world durability issues—has made them a trusted upgrade choice throughout the UK RC community for drivers seeking maximum reliability and extended component lifespan.

What's in the Box

• One pair of RPM Traxxas Slash 4X4 Rear Bearing Carriers (left and right)

What You Need to Complete

• Two 5x11x4mm bearings (sold separately, not included with this product)
• Standard RC tools including screwdrivers and hex wrenches for installation

Frequently Asked Questions

• Will these bearing carriers fit my Traxxas Slash 4x4 or other Traxxas vehicles? — Yes, these RPM rear bearing carriers are designed as direct replacements for Traxxas stock numbers 1952 and 1952X and are compatible with the Slash 4x4, Stampede 4x4, Rustler 4x4, Telluride, Nitro Slash, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle and Blue Eagle LSII. They maintain 100% stock geometry, so installation is straightforward and requires no suspension modifications or tuning adjustments.
• What makes RPM rear bearing carriers better than stock Traxxas components? — RPM has engineered several critical durability improvements: a reinforced ring surrounding the bearing bores for increased structural rigidity, a redesigned camber rod mounting boss that disperses impact energy more effectively, precision bearing bores with zero slop, and reduced axle end-play of approximately 1/64 inch. These enhancements work together to eliminate premature failure points found in stock carriers whilst maintaining the exact geometry your vehicle was designed around.
• Do these bearing carriers require any special tools or technical knowledge to install? — Installation is straightforward for anyone with basic RC maintenance experience. The carriers are direct replacements requiring standard RC tools including screwdrivers and hex wrenches. No suspension modifications, geometry changes, or specialized equipment is needed—simply remove your stock carriers, install the new RPM units with your existing bearings, and your setup is ready to drive.
• What bearings do I need to use with these RPM bearing carriers? — These carriers require two 5x11x4mm bearings, which are not included in the package. You'll need to source these separately from your local RC retailer or online supplier. The precision bearing bores are designed to hold these bearings with zero play, ensuring optimal performance and handling precision.
• Are RPM rear bearing carriers covered by warranty? — Yes, RPM backs these bearing carriers with a limited lifetime warranty against breakage, which is a testament to the engineering quality and material durability. This warranty demonstrates RPM's confidence in their product and provides peace of mind for your investment in upgraded suspension components.
• Why would I upgrade to RPM bearing carriers if my stock ones haven't broken yet? — Even if your stock carriers haven't failed, upgrading to RPM components offers several benefits: extended component lifespan before the first failure occurs, improved handling precision through eliminated bearing slop and reduced end-play, more consistent performance throughout a driving session, and reduced overall maintenance costs through fewer replacement cycles. Many UK RC enthusiasts view these as preventative maintenance that keeps their vehicles performing at peak levels for longer.
• Can these bearing carriers be used on Nitro-powered Traxxas vehicles? — Yes, the RPM rear bearing carriers are compatible with Nitro variants including Nitro Slash, Nitro Rustler, Nitro Stampede and Nitro Sport, as well as the electric-powered versions. The durability improvements are equally valuable across all compatible platforms.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM Traxxas Slash 4X4 Rear Bearing Carriers (Stamp/Rust) RPM80732 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.