Traxxas Shock Tower Rear 7075-T6 Aluminium Green Anodised Sledge TRX9638G

Overview

The Traxxas Shock tower, rear, 7075-T6 aluminium (Green-anodised) (fits Sledge) TRX9638G is a premium chassis upgrade designed specifically for the Traxxas Sledge 1/8 scale monster truck. This is not just a replacement part — it's a precision-engineered component crafted from one of the strongest aluminium alloys available, delivering the durability and performance that serious RC enthusiasts demand. Whether you're a competitive racer pushing your Sledge to its limits or a weekend basher looking to enhance your truck's resilience, this rear shock tower represents a genuine upgrade that makes a measurable difference to your RC car UK experience.

Traxxas engineered this shock tower specifically for the Sledge platform, ensuring perfect factory fit without any modifications required. The green anodised finish not only provides superior corrosion resistance but also delivers a striking two-tone aesthetic that sets your truck apart from the competition. Built from solid 7075-T6 billet aluminium rather than cast or stamped material, this component offers exceptional rigidity and strength where it matters most — supporting your shock absorbers and maintaining your vehicle's race-bred geometry under the most demanding conditions.

As an authorised Traxxas retailer, RC Model Shop stocks genuine Traxxas accessories that are manufactured by Traxxas for Traxxas, guaranteeing compatibility and quality that aftermarket alternatives simply cannot match. If you're upgrading your ready to run RC monster truck or building a high-performance Sledge from the ground up, this rear shock tower is an investment in reliability and longevity.

Key Features

• 7075-T6 Aluminium Construction — This is one of the strongest and most expensive aluminium alloys available in the RC hobby, offering superior strength-to-weight ratio compared to standard 6061-T6 aluminium used in budget components. The 7075-T6 specification means this shock tower will withstand massive impacts, hard landings, and sustained high-speed running without deforming or failing, protecting your suspension geometry and extending component lifespan.
• Precision Milled from Solid Billet — Rather than being cast or forged, this shock tower is milled from a solid billet of 7075-T6 aluminium, ensuring uniform material density, superior tolerances, and elimination of internal voids that could lead to failure. This manufacturing method guarantees a perfect factory fit to your Sledge with no modifications required, maintaining the vehicle's race-bred geometry and suspension geometry precisely as Traxxas engineered it.
• Green Anodised Finish — The anodising process creates a hard, protective oxide layer that dramatically improves corrosion resistance whilst delivering a stunning two-tone visual effect. The green anodised finish protects the aluminium from the elements, making this component suitable for use in wet conditions and prolonged outdoor storage without worry of oxidation or degradation.
• Beveled Edges with Two-Tone Design — The professionally beveled edges create a striking visual contrast with the anodised finish, giving your Sledge a high-end, competition-grade appearance. This isn't purely aesthetic — the beveled edges also reduce stress concentration points and improve aerodynamic flow around the suspension area.
• Laser-Etched Traxxas Logo — Each shock tower bears a laser-etched Traxxas logo for authenticity and maximum visual impact, confirming you're using genuine OEM Traxxas components rather than counterfeit alternatives.
• Includes Complete Hardware Kit — The package includes the shock tower itself, body mount bracket, shock mounting posts, and all necessary stainless steel screws, everything required for immediate installation without hunting for additional fasteners.
• Perfect Factory Fit Guarantee — As a genuine Traxxas accessory manufactured by Traxxas for Traxxas, this rear shock tower guarantees 100% compatibility with Sledge models with zero fitment issues and no drilling, cutting, or modification required.
• Maintains Suspension Geometry — Precision-machined to exact tolerances, this shock tower ensures your Sledge's suspension geometry remains true to Traxxas specification, maintaining handling characteristics and ride quality across all terrain types.

Technical Performance

This rear shock tower represents the pinnacle of RC chassis engineering, manufactured from 7075-T6 aluminium — an aerospace-grade alloy that offers tensile strength of approximately 570 MPa and yield strength exceeding 500 MPa. These figures translate to real-world performance benefits: the shock tower maintains its shape under tremendous loads, resists permanent deformation from hard impacts, and provides the rigid suspension mounting required for consistent handling on the track or trail. The solid billet construction eliminates casting porosity that could initiate crack propagation under stress cycling, making this component exceptionally durable for high-performance RC applications. The anodising process creates a 25-75 micrometre thick protective oxide layer, providing superior corrosion resistance compared to raw aluminium or powder coating, essential for UK RC users who frequently encounter wet conditions, salt spray near coastal areas, or aggressive mud bashing. The precision machining ensures shock mounting post hole positioning is accurate to within a few thousandths of an inch, critical for maintaining Sledge suspension geometry and preventing geometry drift that could occur with less precisely manufactured parts. The body mount bracket integrates seamlessly with Sledge bodywork, and the included stainless steel hardware resists rust and corrosion far better than standard steel fasteners. Installation is straightforward for users with basic RC maintenance skills, typically requiring just a Phillips head screwdriver and approximately 15 minutes per side.

What's in the Box

• Traxxas rear shock tower, 7075-T6 aluminium (green-anodised)
• Body mount bracket
• Shock mounting posts
• Stainless steel fasteners and screws

Frequently Asked Questions

• Will this rear shock tower fit my Traxxas Sledge? — Yes, this component is specifically engineered for the Traxxas Sledge 1/8 scale monster truck platform. It is designed by Traxxas for Traxxas components, guaranteeing perfect factory fit without modifications. It is compatible with all Sledge variants including the Sledge Belted 1/8 4WD Brushless Electric Monster Truck available in Blue, Orange, Green, and Red colour options.
• What makes 7075-T6 aluminium better than standard 6061-T6? — 7075-T6 is one of the strongest aluminium alloys available, offering significantly higher tensile and yield strength compared to 6061-T6 used in budget components. This means the shock tower resists deformation under impact, maintains suspension geometry more accurately, and provides superior durability for competitive racing and aggressive bashing. The trade-off is that 7075-T6 is more expensive to produce, but the performance and longevity benefits justify the investment for serious RC enthusiasts.
• Is this a direct replacement for the stock shock tower? — Yes, this component is a direct replacement that requires no modifications. It includes all necessary hardware including the body mount bracket, shock mounting posts, and stainless steel fasteners. Simply remove your existing shock tower and install this upgraded component using basic tools.
• Why choose this over other aftermarket shock towers? — Genuine Traxxas accessories are manufactured by Traxxas, for Traxxas, ensuring perfect compatibility and fit. This component is precision-machined from solid 7075-T6 billet rather than cast or stamped material, offering superior strength and tolerances. The anodised finish provides excellent corrosion resistance and aesthetic appeal, and the included complete hardware kit means you have everything needed for installation.
• Will this improve my Sledge's handling? — By maintaining precise suspension geometry through a more rigid, accurately machined mounting point, this shock tower ensures consistent handling characteristics across all terrain types. It won't directly improve speed, but it will enhance reliability, consistency, and the feeling of precision in your truck's response to input.
• Is the green anodised finish durable? — Yes, anodising creates a hard protective oxide layer that is far more durable than paint or powder coating. The green anodised finish resists corrosion, maintains its appearance through extended use, and is suitable for wet conditions and outdoor storage common in UK RC bashing and racing environments.
• Can I use this on other Traxxas models? — No, this rear shock tower is specifically designed for the Traxxas Sledge platform. Using it on other models would result in poor fitment and compromised performance. Always ensure components are matched to your specific vehicle model.
• How difficult is installation? — Installation is straightforward for users with basic RC maintenance experience. You will need a Phillips head screwdriver and approximately 15 minutes to remove the old shock tower and install the new one. Detailed installation instructions come with the component.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Shock tower, rear, 7075-T6 aluminium (Green-anodised) (fits Sledge) TRX9638G today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.