Hobbywing Ezrun MAX10 G2S 140A Brushless Combo with the matching Ezrun 3665SD G3 2400kV motor delivers a perfectly factory-tuned powertrain package for 1:10 scale RC cars.
The MAX10 G2S ESC is the advanced successor of the MAX10 G2: it features the same power specs and housing but offers effortless programming without additional devices. The integrated Bluetooth module is built into the switch, enabling seamless connection to your smartphone via the HW-LINK app for configuration, data analysis, and firmware updates. New features include internal data logging and a third BEC voltage stage of 8.4V tailored for high-voltage servos.
This combo really shines thanks to the ESC’s special capabilities: Turbo Timing can only be activated with supported Hobbywing motors, boosting maximum RPM by up to approximately 25%. Additionally, the motor overheat protection works exclusively with compatible Hobbywing motors—both functions come pre-enabled with the supplied Ezrun 3665SD G3.
Features
- Integrated Bluetooth module within the switch – program directly using smartphone without extra equipment.
- Internal data logging of last 10 minutes driving time, graphically analyzable via HW-LINK app.
- Turbo Timing up to 32 degrees – delivers approx. 25% more top speed with the included motor.
- Three-stage BEC: 6V, 7.4V, 8.4V selectable, 5A continuous current in switch mode.
- Frameless temperature-controlled fan with side air outlet.
- Dust and waterproof ESC and motor (IP67 rating) with waterproof sensor cable.
- Capacitor overheat protection.
- Protection against undervoltage, overheating, and signal loss.
- 4-pole rotor for high torque, rapid acceleration, and stable performance.
- CNC-machined aluminum motor housing and highly precise bearings.
Specifications
ESC (Ezrun MAX10 G2S 140A)
Type: 1/10 brushless, sensored and sensorless
Current (continuous/peak): 140A / 880A
Input voltage: 2-4S LiPo
BEC: 6V / 7.4V / 8.4V selectable, 5A continuous (switch mode)
Motor Limits:
- 2S LiPo: KV ≤ 6000 (3652 motors)
- 3S LiPo: KV ≤ 4000 (3665 motors)
- 4S LiPo: KV ≤ 2600 (4268 motors)
Turbo Timing: Up to 32°
Fan: Yes, powered via BEC
Programming: Bluetooth (HW-LINK app), LCD programming box, OTA module
Programming port: Separate 3-pin
Waterproof rating: IP67
Connectors: XT60 input, gold bullet output
Dimensions: 53 x 39.5 x 37.2 mm
Weight: 125 g (with cables and connectors)
Application: 1/10 short course truck, truck, monster truck
Motor (Ezrun 3665SD G3)
Type: Brushless, sensored
KV rating: 2400kV
No-load current: ≤ 5.2A
Cell count: 2-4S LiPo
Pole count: 4
Length: 65.8 mm
Diameter: 37 mm
Shaft diameter: 5 mm
Weight: 304 g
Waterproof rating: IP67
Application: 1/10 on-road/off-road short course truck (light-duty)
Please Note: A minimum 3S LiPo battery is required to use the 7.4V or 8.4V BEC settings. The Bluetooth connection range is approximately 5 meters due to design.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
