The Hobbywing Ezrun MAX10 G2S 140A Brushless Combo pairs the Ezrun MAX10 G2S with 140A and the matching Ezrun 3665SD G3 4000kV Motor – a perfectly synchronized 1:10 scale powertrain package ready for high-performance RC applications.
The MAX10 G2S is the advanced successor to the MAX10 G2: featuring identical performance specs and casing, but now equipped with a regulator that can be configured effortlessly without extra devices. Its integrated Bluetooth module is built into the switch, enabling direct connection to your smartphone via the HW-LINK app. This allows seamless programming, data analysis, and firmware updates. New to the G2S are internal data logging and a third BEC voltage setting of 8.4V designed for high-voltage servos.
In this combo, the ESC’s strengths truly shine: the Turbo Timing feature can only be activated with Hobbywing motors, boosting the maximum RPM by up to approximately 25%. Additionally, the motor overheat protection functions exclusively with supported Hobbywing motors — both available out-of-the-box with the supplied Ezrun 3665SD G3.
Features
- Integrated Bluetooth module in switch – smartphone programming without additional hardware.
- Internal data logging for the last 10 minutes of runtime, visually analyzed in the HW-LINK app.
- Turbo Timing up to 32 degrees – providing around 25% higher top speed with the included motor.
- Three-stage BEC output: 6V / 7.4V / 8.4V at 5A in switch mode, supporting high-voltage servos.
- Frameless, temperature-controlled fan with lateral air outlet.
- Dust and waterproof ESC and motor rated to IP67 standard, including waterproof sensor cable.
- Overheat protection for capacitors.
- Safety features covering undervoltage, overheating, and signal loss conditions.
- 4-pole rotor for high torque, rapid acceleration, and stable performance.
- CNC-machined aluminum housing with high-precision bearings on the motor.
Specifications
ESC (Ezrun MAX10 G2S 140A)
Type: Brushless, compatible with sensored and sensorless motors
Continuous / peak current: 140A / 880A
Input voltage: 2-4S LiPo
BEC adjustable at: 6V, 7.4V, or 8.4V with 5A continuous current (switch mode)
Turbo Timing: Adjustable up to 32 degrees
Temperature-controlled fan powered via: BEC
Bluetooth programming using: HW-LINK app, also supports LCD programmer and OTA updates
Waterproof rating: IP67
Connectors: XT60 input, gold-plated output sockets
Dimensions: 53 x 39.5 x 37.2 mm
Weight: 125 g (including cables and connectors)
Ideal for: 1/10 Short Course Trucks, Trucks, and Monster Trucks
Motor (Ezrun 3665SD G3)
Type: Brushless, sensored
KV rating: 4000kV
Idle current: ≤ 8.2A
Compatible with: 2-3S LiPo batteries
Design: 4-pole design
Length: 65.8 mm | Diameter: 37 mm | Shaft diameter: 5 mm
Weight: 297 g
Waterproof: standard IP67
Suitable for: 1/10 Short Course Trucks, Truggies, and Monster Trucks
Please Note: At least a 3S LiPo battery is required to use the 7.4V or 8.4V BEC settings. The Bluetooth range is approximately 5 meters due to design limitations.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
