Overview
The RPM Body Savers for Traxxas Rustler 4x4 (RPM80632) are an essential upgrade for any RC enthusiast looking to protect and preserve their Rustler 4x4 body. Whether you're a serious basher, weekend racer, or dedicated RC hobbyist in the UK, these cleverly engineered reinforcement brackets solve one of the most common problems encountered with stock Traxxas bodies: cracking and damage at the body mounting screw holes. RPM engineers discovered this weakness even on brand new, unrun Rustler 4x4 vehicles, identifying a critical flaw in the original body design that could lead to costly replacements or unsightly repairs.
If you've ever experienced the frustration of body mounting screws pulling through the body during aggressive driving, or if you're concerned your Rustler 4x4 body is showing signs of weakness around the mounting points, the RPM Body Savers offer the perfect solution. This innovative product eliminates the need for thick, bulky body washers or the expense of purchasing an entirely new body shell. Instead, these carefully engineered reinforcement plates distribute the mounting pressure across a much wider area of the body, ensuring your bodywork stays firmly attached even under extreme conditions or after crashes that have damaged the original mounting holes.
What makes the RPM Body Savers truly special is how they achieve this protection without compromising the aesthetic appeal of your Rustler 4x4. Rather than appearing as obvious repair components, they are ingeniously disguised as integral design features—the front pair looks like authentic moulded hood vents, whilst the rear pair resembles exposed sections of a roll cage, seamlessly blending into the truck's overall appearance.
Key Features
- Prevents body mounting screw hole failure — RPM Body Savers address the inherent weakness in the Traxxas Rustler 4x4 body design by reinforcing the mounting holes and preventing screw pull-through, which is one of the most common causes of body damage on these vehicles.
- Works with damaged bodies — Even if your mounting holes have been completely ripped out from previous crashes or aggressive driving, the RPM Body Savers system still functions effectively, distributing mounting pressure over a wide area to secure the body firmly without requiring hole integrity.
- Disguised design for improved aesthetics — The Body Savers are cleverly moulded to look like authentic bodywork features rather than repair components; the front pair resembles hood vents and the rear pair mimics a roll cage, maintaining the authentic appearance of your Rustler 4x4.
- Intelligent pressure distribution system — Rather than concentrating mounting force on two small holes, the Body Savers tie two pairs of screws together at both front and rear, dispersing the holding pressure across a significantly larger area of the body shell.
- Engineering-grade nylon construction — Manufactured from ultra-strong, engineering-grade nylon in black, the Body Savers offer unmatched durability and performance, resisting stress and impact whilst maintaining flexibility to accommodate body flex during aggressive driving.
- Complete four-piece kit — Each RPM Body Savers package includes four individual reinforcement plates: two for the front mounting points and two for the rear, providing full coverage for your Rustler 4x4's body mounting system.
- Simple, straightforward installation — The Body Savers utilise the existing body mounting screws and sub-frame system, meaning installation requires no modifications to your vehicle and no special tools or expertise.
Technical Performance
The RPM Body Savers represent the culmination of engineering excellence and practical problem-solving from RPM, the recognised leaders in performance upgrades for RC cars and trucks. When RPM engineers examined a brand new Traxxas Rustler 4x4, they identified the same structural weakness they had previously encountered on the Revo 2.0: the body mounting screw holes were insufficiently reinforced at the factory, with cracks and weakening evident even before the vehicle had been run. This discovery led to the development of the Body Savers system, which implements a clever engineering solution that ties the two pairs of body mounting screws together at both the front and rear of the vehicle. By connecting these screw pairs, the system effectively distributes the concentrated mounting pressure across a much wider area of the body shell, dramatically reducing stress at individual mounting points. The Body Savers are precision-moulded from engineering-grade nylon—a material specifically chosen for its combination of strength, flexibility, and durability. This nylon construction provides exceptional impact resistance whilst allowing slight flex, which is crucial for maintaining proper body fit and preventing crack propagation. The black colour is UV-stable and resistant to fading, ensuring that whether your Rustler 4x4 is displayed, raced, or bashed hard through the toughest terrain, the Body Savers will maintain their appearance and structural integrity over extended periods of use. The system's effectiveness is proven under extreme conditions: even if the mounting holes in your body have been completely compromised through crashes or aggressive use, the pressure-distribution design means the Body Savers will continue to function, securely holding your body in place without requiring any repair to the original mounting holes.
What's in the Box
- Two front RPM Body Savers (moulded to resemble hood vents)
- Two rear RPM Body Savers (moulded to resemble roll cage sections)
- All mounting hardware necessary for installation
Compatibility and Technical Notes
The RPM Body Savers for Traxxas Rustler 4x4 are specifically engineered and tested to work with Traxxas Rustler 4x4 bodies, including all variants: the standard Traxxas #6717, the Traxxas #6717G, and the Traxxas #6717R. RPM has not tested these Body Savers with any other Traxxas body variants or with aftermarket bodies from other manufacturers, and therefore cannot guarantee compatibility beyond the three officially supported body options. If your Rustler 4x4 uses any other body shell, we recommend contacting RPM directly before purchasing to confirm compatibility.
Frequently Asked Questions
- Will RPM Body Savers work with my Traxxas Rustler 4x4 body? — The Body Savers are compatible exclusively with Traxxas Rustler 4x4 bodies numbered #6717, #6717G, and #6717R. They have not been tested with other Traxxas bodies or aftermarket options, so compatibility cannot be guaranteed outside these specific model numbers. Always verify your body variant before ordering.
- Can I use Body Savers if my mounting holes are already damaged? — Yes, absolutely. One of the major advantages of the RPM Body Savers system is that it continues to work even when mounting holes have been completely ripped out from crashes or aggressive driving. The pressure distribution system holds your body securely without requiring intact mounting holes, making this an excellent solution for salvaging a damaged body.
- How do RPM Body Savers differ from using thick body washers? — Thick body washers are a crude, temporary fix that leaves your Rustler 4x4 looking unfinished and unprofessional, and they often don't solve the underlying problem. RPM Body Savers provide a permanent, engineered solution that distributes pressure evenly across a wide area whilst being disguised as authentic bodywork features—they look like part of the original design rather than a repair.
- Will these Body Savers fit other RC vehicles? — No, these Body Savers are engineered specifically for the Traxxas Rustler 4x4 and its particular body mounting system. They are not compatible with other vehicle types or scales, and attempting to use them on unsupported vehicles may result in poor fitment and could damage your body or mounting hardware.
- How are the Body Savers disguised? — The front pair of Body Savers are moulded to resemble hood vents, blending seamlessly into the bonnet design, whilst the rear pair are styled to look like exposed sections of a roll cage. This clever design means your Rustler 4x4 maintains an authentic, factory appearance rather than looking repaired or modified.
- What material are RPM Body Savers made from? — The Body Savers are precision-moulded from ultra-strong, engineering-grade nylon in black. This material was specifically chosen for its exceptional durability, impact resistance, and flexibility, ensuring the Body Savers will withstand years of bashing, racing, or competitive use without degrading in performance or appearance.
- Do I need special tools to install Body Savers? — No, installation is straightforward and uses your existing body mounting screws and sub-frame system. No modifications to your vehicle are required, and no special tools or expertise is needed—anyone can install Body Savers in minutes.
- Are Body Savers suitable for racing as well as bashing? — Yes, Body Savers are suitable for any Rustler 4x4 application, whether you're competing in races, practising for competition, or enjoying weekend bashing sessions. The engineering-grade nylon is durable enough for competitive use and will protect your body whether you're pushing the limits on the track or exploring rough terrain.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM Body Savers for Traxxas Rustler 4x4 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Manufacturer: RPM
- Part Number: RPM80632
- EAN: 672415806326
- Product Type: Body Savers / Body Reinforcement Kit
- Vehicle Compatibility: Traxxas Rustler 4x4
- Compatible Bodies: Traxxas #6717, #6717G, #6717R only
- Material: Ultra-strong engineering-grade nylon
- Colour: Black
- Quantity per kit: Four Body Savers (two front, two rear)
- Front Design: Moulded to resemble hood vents
- Rear Design: Moulded to resemble roll cage sections
- Function: Reinforces body mounting screw holes and distributes mounting pressure across wide area
- Installation: Uses existing body mounting screws and sub-frame system
- Effectiveness with damaged bodies: Works even with completely ripped out mounting holes
- Tune-Up Type: Chassis
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
