Overview
The RPM Gear Cover in black is an essential protective upgrade for owners of Traxxas Rustler, Stampede, Bandit, and Slash RC vehicles. This premium-quality gear cover is engineered to safeguard your expensive transmission gears from dirt, rocks, and debris that can cause catastrophic damage during off-road running. Whether you're a casual basher enjoying weekend thrills or a dedicated RC enthusiast pushing your Traxxas through challenging terrain, this gear cover offers unmatched protection that pays for itself the very first time you drive through dirty conditions. The RPM Gear Cover is specifically designed to be compatible with the newest electric versions of these legendary Traxxas models, featuring expanded engineering to accommodate the longer motor shafts found in XL-5 and VXL brushless motor systems.
As a UK RC enthusiast, you understand the investment required to build and maintain a quality ready-to-run RC car. Your transmission gears represent a significant portion of that investment, and stock gear covers leave them dangerously exposed. The RPM solution provides complete peace of mind, allowing you to focus on having fun rather than worrying about debris entering your gear case. RPM has refined this gear cover through extensive development to ensure it fits perfectly across all versions of the Rustler, Stampede, Bandit, and Slash without any modification required. The sleek black contours complement these legendary Traxxas vehicles whilst delivering uncompromising protection.
What sets the RPM Gear Cover apart from inferior aftermarket alternatives is its thoughtful engineering. RPM expanded the access area over the motor shaft to accommodate the longer motors featured in modern Traxxas vehicles, whilst simultaneously narrowing specific areas along the perimeter to provide necessary clearance for rear bumper and wheelie bar mounts. These aren't random design changes—they're the result of genuine understanding of what Traxxas bashers need. The result is a gear cover that offers complete sealing of the gear mesh area, sleek aesthetics, improved performance potential through larger pinion clearance, and hassle-free installation with no cutting, gluing, or modification required.
Key Features
- Completely sealed gear mesh protection — Unlike stock Traxxas gear covers which leave a large, open gap between the spur gear and out-drive, this RPM cover provides complete sealing that prevents dirt and debris from entering your gear case during off-road running.
- Oversized access hole with soft plug system — A generously-sized access hole with an easy-to-use soft plug allows quick and convenient access to the slipper clutch nut whilst maintaining an unmatched seal of the critical gear mesh area, keeping the plug firmly in place yet simple to remove and reinstall.
- Expanded motor shaft accommodation — RPM engineered this gear cover with an enlarged area over the motor shaft to compensate for the longer motor shafts featured in modern XL-5 and VXL brushless motors, ensuring perfect fitment without any modifications.
- Rear bumper and wheelie bar clearance — Two strategically narrowed areas along the gear cover perimeter provide adequate clearance for rear bumper and wheelie bar mounts, allowing this single cover to fit all versions of Rustler, Stampede, Bandit, and Slash models.
- Enhanced pinion clearance — The optimised design provides more clearance for larger pinions, giving speed enthusiasts the freedom to upgrade their drivetrain for increased performance without interference.
- Sleek contoured design — Beyond pure function, the gear cover features attractive contours that complement the aggressive styling of any Traxxas vehicle, enhancing the visual appeal whilst protecting your investment.
- Stock geometry retention — The gear cover maintains all original stock geometry, allowing bolt-on installation without any cutting, gluing, or modification required, making installation straightforward for any RC car owner.
- Prevents expensive gear damage — By blocking dirt and rocks from entering your transmission case, this cover eliminates the risk of blown gears from debris impact, potentially saving you hundreds of pounds in replacement costs.
Technical Performance
The RPM Gear Cover Black (model RPM80522) represents a significant advancement in transmission protection engineering for Traxxas 1/10-scale vehicles. This protective component is manufactured to exacting standards using durable materials designed to withstand the harsh demands of off-road RC bashing. The cover's engineering addresses specific challenges identified in factory Traxxas designs, where the large open gap between spur gear and out-drive allows destructive dirt ingress. RPM's sealed design completely eliminates this vulnerability. The expanded motor shaft area ensures compatibility with the latest brushless motor technology, including Traxxas XL-5 and VXL systems with their extended shaft lengths. The strategically positioned narrowed sections provide clearance for modern rear bumper and wheelie bar components without compromising structural integrity or protection effectiveness. The soft plug access system balances convenience with sealing performance, allowing quick slipper clutch adjustment without removing the entire cover. For owners seeking performance upgrades, the generous pinion clearance accommodates aftermarket competition gears. Whether you're running through muddy trails, sandy beaches, rocky terrain, or dusty fields, this cover maintains a complete seal that keeps critical drivetrain components protected from environmental contamination. The straightforward bolt-on installation requires no specialised tools, making this upgrade accessible to all RC car enthusiasts regardless of mechanical experience.
What's in the Box
- RPM Gear Cover in black finish
- Soft plug for access hole
- Installation hardware (bolts and fasteners)
Compatibility and Vehicle Information
- Traxxas Rustler 1/10 scale electric models
- Traxxas Stampede 1/10 scale electric models
- Traxxas Bandit 1/10 scale electric models
- Traxxas Slash 1/10 scale electric models
- Specifically engineered for XL-5 and VXL brushless motor versions
- Fits all generation variants of compatible models
Frequently Asked Questions
- Will this gear cover fit my specific Traxxas model? — This RPM Gear Cover is designed to fit Traxxas Rustler, Stampede, Bandit, and Slash 1/10-scale electric models. RPM has engineered the design to accommodate all recent versions including those with XL-5 and VXL brushless motors. The expanded motor shaft area and optimised clearance ensure compatibility across the range without modification required.
- What is the difference between the RPM gear cover and the stock Traxxas cover? — The factory Traxxas gear covers leave a large, open gap between the spur gear and out-drive that allows dirt and debris to enter your transmission case. The RPM cover completely seals this gap, providing comprehensive gear mesh protection. Additionally, RPM expanded the motor shaft area for modern brushless motors, narrowed specific perimeter sections for bumper clearance, and designed an oversized access hole with a soft plug for convenient slipper clutch adjustment whilst maintaining maximum sealing.
- Does this gear cover require any modifications to install? — No, the RPM Gear Cover retains all stock geometry and requires no cutting, gluing, or special modifications. Installation is straightforward bolt-on fitment that works with original Traxxas mounting points. The design was engineered specifically to accommodate existing components including rear bumpers and wheelie bars without interference.
- How much protection will this provide? — This gear cover provides comprehensive protection against dirt, rocks, sand, mud, and other debris that can cause catastrophic gear damage. By completely sealing the gear mesh area, the cover prevents environmental contaminants from entering your transmission case, potentially saving hundreds of pounds in gear replacement costs. The protection is especially valuable when running through challenging terrain or extreme conditions.
- Can I still access the slipper clutch with this cover installed? — Yes, the RPM Gear Cover features an oversized access hole with a soft plug system that allows quick and convenient access to the slipper clutch nut. The plug stays firmly in place during operation but is easy to remove when you need to adjust the slipper clutch tension, maintaining the protective seal when the plug is reinstalled.
- Is this suitable for competitive racing? — Absolutely. The RPM Gear Cover is ideal for both recreational bashing and competitive use. The expanded pinion clearance allows competition-minded drivers to upgrade to larger pinions for increased speed without interference. The complete gear protection ensures your transmission remains clean and damage-free, supporting reliable performance in race situations.
- What colour options are available? — The RPM Gear Cover is available in black finish, which complements the aggressive styling of all compatible Traxxas vehicles whilst maintaining visibility of the protected components.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM Gear Cover Black Traxxas Rustler/Stampede/Bandit/Slash RPM80522 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Model Number: RPM80522
- Product Name: RPM Gear Cover Black
- Colour: Black
- Compatible Vehicle: Traxxas Rustler, Stampede, Bandit, Slash 1/10 scale
- Compatible Motor Types: XL-5, VXL brushless motors
- Access Hole: Oversized with soft plug system
- Sealing Type: Complete gear mesh sealing
- Motor Shaft Compatibility: Expanded area for longer brushless motor shafts
- Rear Bumper Clearance: Yes, narrowed perimeter sections provide clearance
- Wheelie Bar Clearance: Yes, optimised design accommodates wheelie bar mounts
- Pinion Clearance: Enhanced for larger aftermarket pinions
- Installation: Bolt-on, no cutting or gluing required
- Mounting: Retains all stock geometry
- Material: Durable engineering-grade polymer
- Protection: Prevents dirt and debris entry into gear case
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
