Team Associated Front Springs V2 Yellow 5.7 lb/in RC8B3 RC8B3.1 AS81226

Overview

The Associated Front Springs V2 Yellow 5.7 lb/in (AS81226) are precision-engineered suspension components designed for serious RC enthusiasts running Team Associated 1/8 scale buggies and trucks. These yellow-coded springs represent the V2 specification, offering refined tuning characteristics for competitive drivers and weekend bashers alike who demand consistent, predictable suspension performance across varying track conditions. Whether you're fine-tuning your RC8B3, RC8B3.1, or RC8B3.2 for a race meeting or simply upgrading your suspension geometry, these springs deliver the engineering excellence you expect from Associated, one of the most respected names in RC car UK culture.

Spring rate is fundamental to how your RC car handles, and the 5.7 lb/in rating on these V2 springs sits in the sweet spot for balanced performance—offering enough compliance to absorb bumps and maintain traction whilst providing sufficient support to prevent excessive body roll during aggressive cornering. The yellow colour code makes identification straightforward when you're managing multiple spring rates or working through setup changes, eliminating confusion in the garage or at the track. These are OEM-quality parts manufactured to the same tolerances as the springs supplied with Team Associated factory kits, ensuring reliability and consistency race after race.

As a fundamental suspension component, upgrading or refreshing your front springs is one of the most cost-effective ways to improve your RC buggy's handling characteristics. Whether you're coming from a different spring rate or simply replacing worn components, these Associated V2 springs will integrate seamlessly into your setup and give you confidence that you're using genuine, authorised parts.

Key Features

• 5.7 lb/in Spring Rate — This moderate spring rate provides the optimal balance between ride compliance and chassis support, allowing your RC8B3 or RC8B3.2 to absorb track imperfections whilst maintaining stability through high-speed corners and jumps.
• V2 Specification — The V2 designation indicates these springs represent the latest engineering iteration from Team Associated, incorporating refinements developed through competitive racing feedback and laboratory testing.
• Yellow Colour Code — The distinctive yellow finish serves dual purposes: it makes these springs instantly recognisable in your spares box and helps you track which spring rates you're running as you dial in your RC car's suspension.
• OEM Quality Manufacturing — These springs are manufactured to the same exacting standards as Team Associated factory-issue components, ensuring consistent performance and longevity even under the demands of competitive use.
• Big Bore Shock Compatibility — Specifically engineered to work with the RC8B3 and RC8B3e Big Bore 1/8 shocks, these springs deliver the responsiveness these modern shock systems are designed to provide.
• Widespread Vehicle Support — Compatible with RC8B3.1, RC8B3.1e, RC8T3.1e, RC8T3.1, RC8B3.2, RC8B3.2e, RC8T3.2, RC8T3.2e, RC8B4, RC8B4e, RC8T4, RC8T4e, RC8B4.1, and RC8B4.1e platforms, these springs represent genuine multi-platform upgrades.

Technical Performance

The engineering behind these Associated V2 Front Springs reflects decades of suspension science and track-proven refinement. Manufactured with consistent wire diameter and precise coil spacing, these springs deliver linear spring characteristics that translate directly into predictable handling behaviour. The 5.7 lb/in rating (equivalent to approximately 1.0 kg/cm in metric measurements) places these springs in the mid-range of the Associated spring rate spectrum, making them ideal for mixed-condition racing where you need to balance speed on the smooth sections with stability on rougher track. The springs measure 70mm in length with an 8.5 turn count and 1.6mm wire diameter, specifications that have been validated through extensive Team Associated racing programs across multiple racing series. When used with the optional #81221 Spring Collars and #81194 Spring Cups (or the integrated versions supplied with RC8B3.1 and B3.1e kits), these springs mount securely to the shock bodies and maintain their geometry under the extreme compression and extension cycles typical of competitive 1/8 scale racing. The material composition ensures long service life whilst maintaining spring rate consistency—critical when you're trying to isolate suspension changes from other setup variables.

What's in the Box

• Associated Front Springs V2, yellow, 5.7 lb/in (pair or single unit depending on retailer packaging)

What You Need to Complete

• #81221 Spring Collars (only required if upgrading RC8B3 or RC8B3e; included with RC8B3.1 and RC8B3.1e kits)
• #81194 Spring Cups (only required if upgrading RC8B3 or RC8B3e; included with RC8B3.1 and RC8B3.1e kits)
• RC8B3, RC8B3.1, RC8B3.2 or compatible Team Associated platform (see compatibility list in Key Features)

Frequently Asked Questions

• What is spring rate and why does the 5.7 lb/in specification matter for my RC buggy? — Spring rate measures how much force is required to compress a spring by one inch. The 5.7 lb/in rating on these Associated V2 springs is considered a moderate rate—softer than stiffer setups but firmer than comfort-oriented springs. A lower spring rate (softer springs) allows more suspension travel and better bump absorption, whilst a higher rate (stiffer springs) reduces body roll and provides more direct steering response. The 5.7 lb/in specification works particularly well on mixed-condition tracks where you need to maintain traction over bumps whilst still controlling chassis movement during cornering and acceleration.
• Are these V2 springs compatible with my RC8B3 or RC8B3.1? — Yes, these springs are explicitly designed for the RC8B3 and RC8B3.1, and also fit the RC8B3.2, RC8B4, RC8B4.1 and Team Associated T-series trucks. Note that if you're fitting them to an original RC8B3 or RC8B3e, you'll need to source the #81221 Spring Collars and #81194 Spring Cups separately, as these aren't included with the springs themselves. However, if you own an RC8B3.1, RC8B3.1e, or later variants, these components are already integrated into your kit.
• How do I know which spring rate to choose for my driving conditions? — Team Associated publishes detailed spring rate charts (available in the documentation section) that guide you through selecting appropriate rates for different track surfaces and driving styles. Generally, softer springs (5.7 lb/in and below) suit rough, bumpy tracks and aggressive driving, whilst stiffer springs work better on smooth, technical courses where precision is paramount. Start with the recommended baseline rate for your platform and track type, then adjust based on how the car handles—if you experience excessive body roll, try slightly stiffer springs; if the car feels harsh and loses traction, consider softer springs.
• What's the difference between these V2 springs and earlier generations? — The V2 designation indicates these are the latest evolution of Team Associated's front spring design, incorporating engineering refinements developed through competitive racing feedback. These improvements typically manifest as enhanced consistency in spring rate characteristics across compression ranges, improved fatigue resistance for longer lifespan, and optimised geometry for the latest Big Bore shock systems. If you're currently running older generation springs, upgrading to V2 specifications will give you more predictable handling and access to up-to-date tuning references used by competitive drivers.
• Why is the colour code important? — The yellow colour code serves as a visual identifier for the 5.7 lb/in spring rate, eliminating guesswork when managing multiple spring rates. Team Associated publishes comprehensive colour code charts showing which colours correspond to which rates, allowing you to quickly confirm you've selected the correct springs for your intended setup. This becomes invaluable when you're switching between soft springs for rough tracks and stiff springs for smooth courses—one quick colour check confirms you've got the right component.
• Can these springs be used on other RC platforms? — These springs are specifically engineered for Team Associated's 1/8 scale platforms and are listed as compatible with RC8B3 series, RC8B4 series, and RC8T series vehicles. They won't fit on other manufacturers' RC buggies or trucks, as the shock system geometry and mounting specifications are unique to Associated platforms. However, within the Team Associated ecosystem, these springs offer broad compatibility across multiple vehicle variants.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Associated Front Springs V2 Yellow 5.7 lb/in AS81226 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall—we look forward to helping you get the most out of your RC experience.