Team Corally Ultra V+ Silicone Wire Red 10AWG 2683 Strands 5.5mm OD 1m C-50105

Overview

The Corally Ultra V+ Silicone Wire in red is the ultimate choice for RC enthusiasts and competitive racers looking for superior performance and reliability in their RC car UK setups. Specially developed by Team Corally with racers in mind, this premium silicone wire features revolutionary strand technology that makes it feel like a wet noodle in your hands — so flexible it won't limit the working of your rear motor pod, especially in 1/12 and 1/10 pan car type vehicles. Whether you're building a brushless RC buggy, preparing a competition-grade RC car, or assembling a ready to run RC model, this wire delivers the electrical performance and mechanical flexibility that serious RC hobbyists demand.

What sets the Corally Ultra V+ apart from standard silicone wire is its innovative construction using 2683 individual strands of just 0.05mm thickness. This extreme strand count creates a wire that is 70% more flexible than normal silicone wire while maintaining excellent current-carrying capacity. The pre-tinned copper wire makes soldering effortless, even for those new to RC car assembly, whilst the thinner silicone insulation delivers even greater flexibility without compromising durability. For RC racing enthusiasts in the UK and across Europe, this wire represents the pinnacle of power delivery and ease of use.

The 10 AWG specification provides a 6.0mm² conductor cross-section, delivering professional-grade electrical performance in a compact 5.5mm outer diameter package. The highest grade of copper combined with pure silicone insulation ensures maximum power transmission with minimal voltage loss, keeping your brushless motor running at peak efficiency. If you're serious about RC hobby performance, whether you're competing in pan car racing or building custom RC cars, the Corally Ultra V+ Silicone Wire is an investment in your model's electrical reliability and your own soldering convenience.

Key Features

• 2683 Ultra-Fine Strands at 0.05mm Each — The innovative strand geometry features 2683 individual copper strands of just 0.05mm diameter, creating a wire that is 70% more flexible than standard silicone wire whilst maintaining superior current-carrying capacity, making it perfect for tight spaces in competitive RC cars.
• Extreme Flexibility and Soft Feel — With a flexibility grade rated as flexible and super soft, this wire feels and behaves like a wet noodle in your hands, allowing it to route freely through tight motor pods without kinking, crimping or restricting suspension movement in 1/10 and 1/12 scale RC pan cars.
• Lower Internal Resistance — The high strand count and premium copper quality deliver significantly lower internal resistance compared to conventional silicone wires, meaning less voltage drop across the wire itself and more power reaching your brushless motor when you need it most.
• Higher Current Capability — Despite its compact 5.5mm outer diameter, this wire can handle more current than standard 10 AWG wires, making it ideal for high-performance brushless systems that demand reliable power delivery in race conditions.
• Pre-Tinned Copper for Easy Soldering — The wire arrives pre-tinned, eliminating the preparation step and making solder joints faster and more reliable, whether you're a seasoned RC competitor or building your first ready to run RC setup.
• Pure Silicone Insulation — The highest grade of pure silicone insulation, combined with thinner insulation thickness, provides maximum flexibility whilst maintaining excellent electrical safety and durability across countless charge cycles and racing seasons.
• Compact 5.5mm Outer Diameter — The 10 AWG wire is engineered to the absolute minimum outer diameter of just 5.5mm, allowing tight wire routing in competitive pan cars where space is at a premium and motor pod movement must remain unrestricted.
• Red Colour for Easy Identification — The vibrant red insulation colour provides clear visual identification of positive power connections, making circuit building, troubleshooting and race-day maintenance faster and more reliable.
• 1 Metre Length — Each package contains a full 1 metre length of wire, providing ample material for complete wiring harnesses, battery connections, ESC links and motor leads with surplus for future repairs or alternative setups.

Technical Performance

The Corally Ultra V+ Silicone Wire represents a significant engineering advancement in RC power distribution technology. At 10 AWG (6.0mm² cross-section), this wire is specifically engineered for high-performance brushless RC systems where every millivolt of voltage delivery matters in competitive racing. The revolutionary strand architecture using 2683 × 0.05mm strands creates a conductor matrix that distributes current more evenly than traditional stranding methods, resulting in measurably lower internal resistance. This technical advantage translates directly into less voltage loss across the wire, meaning higher voltage reaches your brushless motor and ESC under full load conditions — critical for achieving maximum speed and acceleration in time-trialled pan car racing. The premium-grade copper ensures consistent conductivity and excellent solder-joint reliability across dozens of connect-disconnect cycles typical in RC hobby usage. The pure silicone insulation is engineered to withstand the thermal stresses of high-current discharge, repeated soldering operations, and the mechanical flexing that occurs as motor pods articulate and suspension moves. The thinner insulation profile, made possible only by the superior insulation material, achieves the remarkable 5.5mm outer diameter whilst maintaining full electrical safety standards. For RC enthusiasts building high-performance brushless RC cars, upgrading to this professional-grade wire is one of the most impactful performance improvements available, delivering measurable voltage gains and absolute reliability during critical race moments. The wire's extreme flexibility means it will never limit suspension articulation, motor pod movement, or drivetrain function — a critical consideration in pan car racing where every millimetre of movement contributes to handling characteristics.

What's in the Box

• Corally Ultra V+ Silicone Wire — 1 metre length, red insulation, 10 AWG, pre-tinned, ready to use

Frequently Asked Questions

• Is Corally Ultra V+ Silicone Wire suitable for competitive RC car racing? — Absolutely. This wire was specifically developed by Team Corally for racing applications, and its ultra-flexible construction ensures it will not limit motor pod movement in competitive 1/10 and 1/12 pan cars whilst delivering the lowest possible voltage drop during high-current racing scenarios.
• What makes this wire more flexible than standard silicone wire? — The strand count is dramatically higher — 2683 strands of just 0.05mm diameter each, compared to standard wires with far fewer, thicker strands. This creates a wire that is 70% more flexible and feels like a wet noodle whilst maintaining superior electrical properties.
• Will this wire fit in tight motor pod spaces? — Yes. The extremely thin outer diameter of just 5.5mm, combined with exceptional flexibility, allows this wire to route through tight motor pods, around suspension components and along chassis rails without restriction, whilst delivering higher current capacity than standard 10 AWG wires.
• Is the wire pre-tinned for easy soldering? — Yes, the copper is pre-tinned, meaning you can solder connections immediately without any additional preparation. This saves time during assembly and ensures faster, more reliable solder joints, whether you're a beginner or experienced RC builder.
• How does lower internal resistance benefit my RC car's performance? — Lower internal resistance means less voltage is lost in the wire itself. More voltage reaches your brushless motor and ESC, translating to higher top speed, faster acceleration and more responsive throttle control during competitive racing or high-performance driving sessions.
• What is the difference between this and standard silicone RC wire? — The Ultra V+ uses 70% more strands (2683 vs. typical stranding), resulting in lower internal resistance, higher current capacity for the same gauge, extreme flexibility that won't restrict motor pod movement, and thinner insulation for an even more compact profile. These advantages make it the choice of competitive racers.
• Can I use this wire on any brushless RC car? — Yes. The 10 AWG specification and pre-tinned construction make this wire suitable for any RC car with a brushless motor system, from ready to run RC models to competition-grade pan cars, crawlers, buggies and truck platforms.
• How long will 1 metre of wire last in my RC car? — One metre is typically sufficient for a complete wiring harness including battery connections, ESC links and motor leads. Should you need replacements or build multiple cars, additional lengths can be ordered separately.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the CORALLY ULTRA V+ SILICONE WIRE SUPER FLEXIBLE RED 10AWG 2683/0.05 STRANDS OD 5.5MM 1M C-50105 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.