Overview
The ARRMA High Torque Slipper Set 61T, 08. Mod (Z-ARA-2876) is an essential drivetrain component for RC enthusiasts running ARRMA brushless vehicles. This pre-built, ready-to-install slipper set represents genuine OEM engineering from ARRMA, one of the world's leading manufacturers of high-performance RC cars and trucks. Whether you're a dedicated basher, weekend racer, or serious competitor in the UK RC hobby scene, a quality slipper clutch is crucial for protecting your drivetrain during heavy acceleration, launches, and impact scenarios.
A slipper clutch is a vital safety mechanism in any modern RC car UK setup. It prevents catastrophic drivetrain failure by allowing the spur gear to slip relative to the motor when excessive torque is applied, protecting expensive gearbox components from damage. The ARRMA High Torque Slipper Set is specifically engineered for brushless RC applications, where the instant torque delivery of brushless motors can otherwise cause severe mechanical stress. This 61-tooth spur gear configuration with 0.8MOD specs makes it compatible with a wide range of current ARRMA 2WD models, including the popular FURY 223S, QUAKE 223S, and VORTEKS 223S platforms.
Supplied fully assembled and pre-set from the factory, this slipper set arrives ready to drop straight into your vehicle with no additional tuning required, though experienced builders can adjust the spring tension using the composite nut if desired. For anyone running a brushless RC short course truck, stadium truck, or monster truck from the ARA32xx and ARA35xx model ranges, this is the genuine ARRMA replacement part you need to keep your drivetrain performing reliably.
Key Features
- Metal Slipper Hub — The metal construction of the slipper hub provides significantly greater durability and heat resistance compared to plastic alternatives, ensuring consistent performance even under sustained high-torque brushless operation where plastic hubs would wear quickly or fail.
- 61-Tooth Durable Composite Spur Gear — This 61-tooth spur gear features 0.8MOD (metric gear specification) composite construction, delivering the ideal balance between weight savings and durability whilst handling reliable power delivery from brushless motors without stripping or breaking teeth prematurely.
- Red Anodised Aluminium Slipper Shaft — The strong red anodised aluminium shaft resists corrosion and provides excellent structural integrity whilst the anodised finish offers superior wear resistance compared to bare aluminium, maintaining smooth slipper operation over extended use.
- Molded Composite Tension Nut — The precision-molded composite nut allows you to set the spring tension with ease, enabling fine-tuning of slipper engagement characteristics to match your driving style, track conditions, or personal preferences without requiring specialist tools.
- Pre-Built and Ready to Install — Supplied fully assembled and pre-set from the factory, this slipper set requires no additional construction or calibration, allowing you to install it immediately and return to driving rather than spending time on setup and adjustment.
- Genuine ARRMA OEM Component — As an authentic factory part, this slipper set meets ARRMA's strict engineering standards and is designed specifically to work perfectly with the mechanical tolerances and specifications of compatible ARRMA vehicles.
Technical Performance
The ARRMA High Torque Slipper Set is engineered specifically for brushless RC applications where traditional slippers can struggle with the enormous torque spikes generated by brushless motors. The metal slipper hub eliminates the wear and heat problems associated with plastic hubs, whilst the 61-tooth composite spur gear provides the correct gear ratio and durability for 2WD stadium trucks, short course trucks, and monster trucks in the ARRMA range. The red anodised aluminium shaft offers exceptional stiffness whilst resisting the corrosion that can occur during outdoor running, particularly in wet UK conditions. With a 0.8MOD specification, the spur gear teeth are precisely machined to mate perfectly with the pinion gear, ensuring smooth power delivery and minimising backlash. The composite tension nut is tuneable, allowing experienced RC enthusiasts to adjust slipper spring pressure to either engage more firmly (for smoother acceleration and better traction on carpet or loose surfaces) or slip more freely (for maximum protection during high-speed impacts or hard launches). This versatility makes the slipper set suitable for both recreational bashing and competitive racing scenarios. The complete assembly arrives pre-set to factory specifications, which represents an ideal balance for most drivers and eliminating guesswork during initial installation.
What's in the Box
- ARRMA High Torque Slipper Set 61T, 08. Mod — pre-built and ready to install
Compatibility
- ARRMA 1/10 FURY 223S BLX Brushless 2WD Short Course Truck RTR with DSC (Green, Blue, Purple colour variants)
- ARRMA 1/10 QUAKE 223S DSC 2WD RTR Brushless Monster Truck (Red, Purple, Green colour variants)
- ARRMA 1/10 VORTEKS 223S DSC 2WD RTR Brushless Stadium Truck (Yellow, Pink, Blue colour variants)
- All ARA32xx and ARA35xx model platforms
Frequently Asked Questions
- What is a slipper clutch and why do I need one on my brushless RC car UK? — A slipper clutch is a critical safety mechanism that protects your expensive drivetrain components. When you launch hard or hit an obstacle at speed, brushless motors generate enormous torque spikes that can instantly shatter gearbox components, break axles, or snap spur gears. The slipper clutch prevents this by allowing the spur gear to slip relative to the motor hub during these extreme torque events, absorbing the shock and protecting your vehicle. Without a properly functioning slipper, one hard launch or crash could result in hundreds of pounds worth of damage to your drivetrain.
- Is this slipper set suitable for beginners? — Absolutely. The ARRMA High Torque Slipper Set arrives pre-built and pre-set, so you can simply install it without any tuning or adjustment. The factory settings work perfectly for recreational driving and bashing. As your skills develop and you move toward racing or more aggressive driving, you can experiment with adjusting the tension nut to fine-tune performance, but this is entirely optional.
- What vehicles is this slipper set compatible with? — This genuine ARRMA slipper set is designed for ARRMA 2WD models including the FURY 223S Short Course Truck, QUAKE 223S Monster Truck, and VORTEKS 223S Stadium Truck, across all colour variants. It is also compatible with all ARA32xx and ARA35xx model platforms. Check your vehicle's model number to confirm compatibility before purchasing.
- Can I adjust the slipper tension after installation? — Yes. The molded composite tension nut allows you to adjust spring tension to customise how the slipper engages. Tightening the nut increases slipper engagement for smoother acceleration, whilst loosening it allows the slipper to slip more freely for maximum drivetrain protection during high-impact driving. Most drivers leave the factory pre-set unless they want to fine-tune for specific conditions.
- What makes this better than aftermarket slipper sets? — As a genuine ARRMA OEM part, this slipper set is engineered to the exact specifications of your vehicle, with precisely matched tolerances that ensure perfect integration with your existing drivetrain. The metal slipper hub offers superior durability compared to plastic alternatives, and the red anodised aluminium shaft resists corrosion and wear far better than inferior alternatives. Using authentic parts ensures reliability and longevity.
- Do I need any tools or special equipment to install this? — No specialist tools are required. The slipper set is supplied fully assembled and ready to install. You will need standard RC tools such as a hex driver or Allen key to access your vehicle's slipper clutch location, but the actual installation is straightforward and can be completed in minutes by most RC enthusiasts.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the ARRMA High Torque Slipper Set 61T, 08. Mod Z-ARA-2876 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or get in touch — we look forward to helping you get the most out of your RC experience.
