Overview
Keep your Traxxas 2065R metal gear servo in peak waterproof condition with this genuine replacement servo case and gasket kit. Whether you're running a high-performance RC car, truck, or buggy in wet conditions or challenging terrain, maintaining a fully waterproof servo is essential for reliability and longevity. This official Traxxas part is specifically engineered for the 2065R sub-micro servo, restoring complete waterproof protection after wear, damage, or regular maintenance. For dedicated RC enthusiasts across the UK who demand the best in servo performance and durability, this replacement case represents the perfect solution to extend the life of your investment.
The 2065R servo has earned its reputation as a trusted workhorse in the RC hobby, delivering consistent performance in demanding applications. However, exposure to water, mud, and debris can compromise the integrity of the servo case over time, leading to potential failure when you need it most. This genuine Traxxas replacement case restores that critical waterproof seal, ensuring your servo continues to perform reliably whether you're bashing through wet grass, tackling water crossings, or operating your ready to run RC car in unpredictable British weather. The kit includes everything needed to fully restore waterproof integrity without replacing the entire servo.
Perfect for RC car UK operators, weekend bashers, and competitive racers alike, this servo case and gasket kit is an essential spare part to keep in your toolkit. Whether you're maintaining a single vehicle or managing a fleet of RC models, having genuine replacement parts on hand ensures minimal downtime and maximum peace of mind. Trust Traxxas quality and engineering to keep your servo performing at its best, season after season.
Key Features
- Official Traxxas Replacement Part — This is the genuine OEM servo case and gasket kit from Traxxas, ensuring perfect fit and compatibility with your 2065R servo. Using authentic manufacturer parts guarantees the highest quality standards and reliable performance that cheap aftermarket alternatives simply cannot match.
- Waterproof Case Restoration — The replacement case includes all three sections (upper, lower, and middle) needed to fully restore the waterproof protection of your servo. This is critical for protecting internal components from moisture ingress, which can cause corrosion, electrical shorts, and catastrophic servo failure during use.
- Complete Gasket and O-Ring Seals — Included are new o-rings and seals for all sections of the case, providing a fresh waterproof barrier. Over time, rubber seals deteriorate and lose their ability to maintain a watertight seal, making these replacements essential for restoring full waterproof capability to your servo.
- Sub-Micro Servo Precision Engineering — Designed specifically for the 2065R metal gear servo, this case is precision-engineered to exact tolerances, ensuring a perfect fit that maintains optimal servo performance. The sub-micro form factor means this kit is ideal for compact applications where space is at a premium, such as mini RC vehicles and scale models.
- Metal Gear Compatibility — This case is specifically designed for the 2065R servo, which features metal gears for enhanced durability and torque delivery. The robust construction of metal gear servos demands equally robust protection, making a properly sealed waterproof case absolutely essential.
- Not Compatible with Similar Models — This case is designed exclusively for the 2065R servo and will not fit 2065A or 2065X models. Using the correct case is critical to ensure proper sealing and servo functionality, so it is important to verify you have the right model before purchasing.
Technical Performance
The 2065R servo is a precision-engineered metal gear servo built to deliver consistent torque and reliability across demanding RC applications. This replacement case and gasket kit is engineered to restore the original waterproof protection that Traxxas built into the servo from the factory. The case comprises upper, lower, and middle sections manufactured to exact specifications, with new o-rings and seals designed to maintain a hermetic seal against moisture intrusion. Waterproofing in servos is achieved through precision-engineered gaskets and o-rings that compress to form a watertight barrier at all connection points. As these components age or are removed for maintenance, they lose their sealing effectiveness, which is why replacement kits like this one are essential for preserving servo functionality. The metal gears within the 2065R require protection from moisture and contaminants, and this replacement case provides that critical protection. Whether operating in high-humidity environments, wet grass, water crossings, or challenging British weather conditions, a properly sealed servo case is the difference between reliable performance and catastrophic failure. This kit allows you to restore full waterproof protection without the expense of replacing the entire servo assembly.
What's in the Box
- Upper servo case section
- Lower servo case section
- Middle servo case section
- New o-rings and seals for all sections
Frequently Asked Questions
- Why would I need a replacement servo case and gasket kit? — The waterproof seals in your servo case degrade over time through normal use, exposure to moisture, and removal for maintenance. Once these seals lose their effectiveness, water can seep into the servo, causing corrosion and electrical failure. This replacement kit restores complete waterproof protection without requiring a full servo replacement, saving you money whilst maintaining peak performance.
- Will this case fit my existing 2065R servo? — Yes, this kit is designed specifically for the Traxxas 2065R metal gear servo and will fit perfectly. However, it will not fit the 2065A or 2065X models, so it is essential to verify you have a 2065R servo before ordering. Check your servo documentation or packaging to confirm the model number before purchasing.
- Is this suitable for use in wet conditions? — Absolutely. This replacement case and gasket kit is specifically designed to restore full waterproof protection to your 2065R servo. Once installed, it will keep water and moisture out during wet grass bashing, water crossings, and operation in rain or humid conditions. This makes it ideal for UK RC car enthusiasts who face unpredictable weather.
- Do I need any special tools to install this kit? — Installation requires basic tools and mechanical knowledge to safely disassemble and reassemble your servo. If you are not comfortable working with small precision components, we recommend having an experienced RC technician perform the installation. The kit itself is straightforward once the servo case is open.
- How often should I replace the case and gaskets? — This depends on how heavily you use your servo and the conditions it operates in. For regular bashers, replacement every 1-2 years is reasonable maintenance. For competition racers or heavy users, annual replacement ensures maximum waterproof protection. If you notice water seeping into your servo or performance degradation, replace the case and gaskets immediately.
- Is this an official Traxxas product? — Yes, this is the genuine OEM replacement kit manufactured by Traxxas. The part number TRX2063R is the official designation for this component. Using authentic Traxxas parts ensures perfect compatibility and the highest quality standards.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Servo case / gaskets (for 2065R metal gear, waterproof, sub-micro servo) TRX2063R today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: Traxxas
- Part Number: TRX2063R
- EAN: 020334206381
- Product Type: Servo case and gaskets replacement kit
- Compatibility: Traxxas 2065R metal gear waterproof sub-micro servo
- Not Compatible With: 2065A servo, 2065X servo
- Case Sections Included: Upper, lower, and middle
- Seals Included: New o-rings and seals for all sections
- Purpose: Waterproof restoration and maintenance
- Servo Type: Metal gear, waterproof sub-micro servo
- Manufacturer Recommended Use: Restoring full waterproof condition after wear or maintenance
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
