Keep your Traxxas XRT steering system running true with this genuine Traxxas steering bell crank and servo saver set. Whether you're replacing worn or crash-damaged steering components or simply carrying out routine maintenance, this factory-fit assembly restores precise, reliable steering to your XRT. Manufactured from tough engineered composite, these bell cranks are built to the exact factory specification, ensuring correct geometry, smooth articulation, and a perfect drop-in fit with no modification required.
This complete assembly covers the heart of your XRT's steering system — the component that translates servo movement into wheel angle. As a genuine Traxxas part, it's engineered to work seamlessly with your existing servo, drag link, and steering linkage, giving you confidence that your repair or refresh will perform exactly as the vehicle did when new.
Key Features
Genuine Traxxas Bell Cranks — Precision-moulded to factory tolerances, these bell cranks restore accurate steering geometry and ensure a proper factory fit on your XRT.
Integrated Servo Saver — Protects your servo from impact damage during crashes and hard cornering by allowing controlled flex in the steering linkage, helping prevent stripped gears in your servo.
Servo Saver Spring Included — The correct-tension spring is included to maintain consistent steering response and proper preload in the servo saver mechanism.
Drag Link Included — A replacement drag link is included to connect the servo saver to the steering linkage, ensuring reliable transfer of steering input.
Mounting Screws Included — Comes complete with 2x 3x20mm shoulder screws, so you have the fasteners you need to complete the installation without hunting for extra hardware.
Direct Factory Fit — As a genuine Traxxas accessory, this set is designed to install without modification, keeping your steering geometry correct and your warranty considerations straightforward.
Broad XRT Compatibility — Fits Traxxas XRT models including the XRT Ultimate and XRT VXL-8S, as well as the Funco Motorsports Pro Scale 8S 2WD Electric Sand Car.
Technical Performance
This set restores your XRT's steering system to factory specification. The bell cranks are engineered to the correct pivot geometry so that steering input from your servo translates accurately and predictably into wheel movement. The servo saver and matched spring work together to absorb impact loads during hard hits or aggressive cornering, protecting your servo's internal gears from the shock loading that causes stripped gears — a common failure point when steering components wear out or are damaged in a crash. The included drag link maintains the correct link length and geometry between the servo saver and the steering linkage, so replacing the full set together (rather than mixing worn and new parts) keeps everything working in proper alignment. Because these are genuine Traxxas parts, they're built to the same tolerances as your XRT's original equipment, so installation is straightforward and steering feel returns to as-new condition.
What's in the Box
- Steering bell cranks
- Servo saver
- Servo saver spring
- Drag link
- 3x20mm shoulder screws (2)
Frequently Asked Questions
Is this an aluminium upgrade part? — No. This is the genuine Traxxas factory-spec steering bell crank set, made from engineered composite material, exactly as fitted from the factory. If you're looking for an aluminium performance upgrade, that would be a separate optional part.
Why would I need to replace this part? — The most common reasons are crash damage (a hard hit can crack or strip a bell crank) or general wear from extended use. If your XRT's steering feels loose, inconsistent, or has visible damage around the servo saver, this set will restore it to correct working order.
What does the servo saver do? — It's a safety mechanism that allows the steering linkage to flex slightly under a hard impact, absorbing energy that would otherwise be transmitted straight into your servo's gears. This significantly reduces the risk of stripping your servo during hard driving or crashes.
Will this fit my servo? — Yes, this set is compatible with any standard servo already fitted to your XRT — no additional servo purchase is required.
Is installation straightforward? — Yes. Installation is a drop-in factory-fit replacement requiring only basic hex drivers. No cutting, drilling, or modification is needed.
Will this fit both the XRT VXL-8S and XRT Ultimate? — Yes, this set is compatible with all XRT variants (VXL-8S and Ultimate, all colour options) and the Funco Motorsports Pro Scale 8S 2WD Electric Sand Car.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Steering Bell Cranks / Servo Saver / Servo Saver Spring / Drag Link / 3x20mm Shoulder Screws (2) TRX7843 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
