Traxxas Driveshafts, Centre E-Maxx (Steel constant-velocity) Front (1pc) / Rear (1pc) (assembled with inner and outer dust boots, for 3905 E-Maxx) TRX5151R

Overview

The Traxxas Steel Constant-Velocity Centre Driveshafts (TRX5151R) represent the pinnacle of RC drivetrain engineering, designed specifically for the E-Maxx platform. Whether you're a seasoned RC enthusiast running high-performance setups or a dedicated basher pushing your vehicle to its limits, these centre driveshafts deliver the strength and reliability needed for extreme horsepower and articulation demands. These are simply the most advanced steel CV driveshafts available on the market today, engineered to exacting specifications for ultimate strength and performance.

If you're running a 6S LiPo setup or any high-powered configuration on your E-Maxx, upgrading to these steel constant-velocity driveshafts is a must-have modification. The original equipment may struggle under the extreme loads that modern brushless motors and high-capacity batteries deliver, but these purpose-built shafts are engineered from the ground up to handle whatever you throw at them. For RC car enthusiasts in the UK looking to upgrade their E-Maxx transmission, this is the gold-standard solution that professional competitors and weekend bashers alike trust.

What sets these centre driveshafts apart from standard equipment is the combination of advanced engineering, premium materials, and meticulous attention to detail. Every component has been designed with both durability and performance in mind, ensuring that your investment in quality parts translates directly to improved reliability and handling on the track or trail.

Key Features

• Steel Constant-Velocity Joint Design — The CV joint technology allows for smooth power delivery even during extreme articulation and suspension movement, maintaining consistent torque transfer regardless of shaft angle and ensuring your E-Maxx performs predictably in demanding conditions.
• Lubricated and Sealed U-Joints — Both the inner and outer U-joints are protected by rubber boots that keep dirt, water, and debris out whilst retaining lubrication, extending the lifespan of these critical components and reducing maintenance requirements.
• Lightweight Aluminium Sleeve Design — The U-joint pins are held captive by a lightweight aluminium sleeve, which eliminates the possibility of losing a pin during aggressive driving and ensures the shaft remains permanently assembled even under extreme stress.
• Nickel-Plated Steel Construction — The shafts feature nickel plating which provides superior corrosion resistance and durability, protecting against the elements and ensuring long-term reliability whether you're running on-road or off-road.
• Blue Silicone Boots — High-quality blue silicone rubber boots provide excellent sealing and protection for the CV joints whilst withstanding the heat and stress of high-performance driving, maintaining their integrity through countless runs.
• Red-Anodised Aluminium Accents — The red-anodised aluminium components not only give these driveshafts a distinctive, professional appearance that will make your E-Maxx stand out, but also provide additional corrosion protection and durability.
• Designed for Extreme Horsepower — These shafts are specifically engineered to handle the extreme power output of modern brushless motor setups, making them essential for anyone running high-performance electronics on their E-Maxx platform.
• E-Maxx Specific Engineering — Manufactured to exact OEM specifications for the 3905 E-Maxx chassis, these driveshafts integrate perfectly with your existing setup without modification or compatibility concerns.

Technical Performance

The Traxxas Steel Constant-Velocity Centre Driveshafts represent the absolute pinnacle of RC drivetrain technology. Built from nickel-plated steel, these shafts deliver uncompromising strength whilst maintaining a lightweight profile that doesn't add unnecessary rotational mass to your E-Maxx's transmission. The constant-velocity joint design is the key to their superior performance: unlike traditional Hooke-type joints that can produce vibration and inconsistent power delivery as the shaft angle changes, CV joints maintain smooth, uniform torque transfer throughout the suspension's range of motion. This means better traction, more predictable handling, and improved overall performance whether you're navigating technical terrain or pushing top speed on wide-open sections.

The engineering excellence extends to every detail. The inner and outer U-joints operate in a fully sealed and lubricated environment created by the blue silicone rubber boots, protecting against water ingress and contamination from dust and dirt. The lightweight aluminium sleeve that holds the U-joint pins captive is a critical safety feature—it means you'll never lose a pin mid-run, and you won't experience the sudden drivetrain failure that can result from component separation. The red-anodised aluminium accents aren't just for looks; anodising provides a hard, corrosion-resistant surface that enhances durability and longevity. These driveshafts are assembled complete with inner and outer dust boots, so they're ready to install straight from the box without additional assembly or purchasing of separate components. For RC car enthusiasts in the UK who demand maximum reliability and performance from their E-Maxx platform, particularly those running 6S LiPo batteries with high-output brushless motors, these centre driveshafts are an essential upgrade that delivers measurable improvements in durability, consistency, and driving experience.

What's in the Box

• Steel constant-velocity centre driveshaft — front (1 piece)
• Steel constant-velocity centre driveshaft — rear (1 piece)
• Inner dust boots (pre-assembled)
• Outer dust boots (pre-assembled)

Frequently Asked Questions

• Are these centre driveshafts suitable for high-powered 6S LiPo E-Maxx setups? — Yes, absolutely. Owners running 6S LiPo batteries have confirmed that these steel constant-velocity driveshafts are a must-have upgrade. The original equipment driveshafts can struggle under the extreme power output of modern brushless motor and high-capacity battery combinations, but these engineered shafts are specifically designed to handle that level of performance without flexing or breaking.
• What makes CV driveshafts better than standard driveshafts? — Constant-velocity joints maintain smooth, consistent power delivery even when the shaft angle changes during suspension articulation. This results in more predictable handling, better traction, and smoother acceleration compared to traditional Hooke-type joints that can produce vibration and torque ripple as the shaft articulates.
• Do these shafts come fully assembled and ready to install? — Yes, these centre driveshafts arrive completely assembled with both inner and outer dust boots already fitted. You can install them straight from the box without any additional assembly, modification, or the need to purchase separate components.
• How do the sealed and lubricated U-joints benefit my RC car? — The sealed rubber boot design creates a protective chamber around the U-joints, keeping dirt, water, and debris out whilst retaining the lubrication that keeps the joints operating smoothly. This significantly extends component lifespan and reduces the maintenance burden compared to unsealed joints that require frequent cleaning and re-lubrication.
• Why is the lightweight aluminium sleeve important? — The aluminium sleeve holds the U-joint pins captive, which means the pins cannot fall out during aggressive driving or high-stress situations. This eliminates a common failure mode and ensures your driveshaft remains permanently assembled, providing peace of mind during competitive racing or serious bashing sessions.
• Are these compatible with the E-Maxx 3905 chassis? — Yes, these driveshafts are engineered to exact OEM specifications for the Traxxas 3905 E-Maxx. They are designed as a direct fit with no modification required, and they integrate perfectly with all standard E-Maxx drivetrain components.
• What's the advantage of nickel-plated steel construction? — Nickel plating provides a hard, corrosion-resistant coating that protects the steel shafts from rust and degradation, ensuring they maintain their strength and appearance through countless runs in wet conditions, muddy terrain, and harsh environments. This translates to longer service life and consistent performance.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Driveshafts, Centre E-Maxx (Steel constant-velocity) Front (1pc) / Rear (1pc) (assembled with inner and outer dust boots, for 3905 E-Maxx) TRX5151R today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.