TRX2443T

Overview

The Traxxas Camber Links Rear in orange are precision-engineered suspension components designed specifically for the Traxxas Drag Slash and compatible RC vehicles. These rear camber links represent the pinnacle of RC suspension tuning, manufactured by Traxxas, the world's leading brand in ready-to-run RC cars and performance upgrades. Whether you're a serious RC racer in the UK looking to dial in your suspension geometry or a dedicated enthusiast seeking to optimise your vehicle's handling characteristics, these camber links deliver professional-grade performance at an accessible price point. The orange anodised finish makes them highly visible on your RC car, ensuring you can easily identify them during setup and maintenance.

Camber links are critical suspension components that control the angle of your wheels relative to the vertical plane. By adjusting camber angle, you can fine-tune your RC car's cornering behaviour, tyre wear patterns, and overall track performance. The Traxxas rear camber links are an essential upgrade for any serious RC driver in the UK seeking competitive advantage or improved handling characteristics on the circuit. These turnbuckle-style suspension adjusters allow you to make precise micro-adjustments to your suspension geometry, a capability that separates serious racers from casual bashers. If you own a Drag Slash or compatible Traxxas vehicle and want to unlock the full potential of your RC car's handling, these camber links are an indispensable addition to your spares and tune-ups collection.

What sets these particular camber links apart from standard offerings is their construction from premium 7075-T6 aluminium alloy, which is actually stronger than titanium whilst remaining significantly lighter than traditional steel alternatives. This exceptional material science means your suspension adjustments stay rock-solid under the most demanding cornering forces, ensuring your carefully dialled-in camber settings remain consistent lap after lap. The included aluminium wrench prevents marring of your turnbuckles during adjustment, protecting both the components and the appearance of your RC car.

Key Features

• 7075-T6 Aluminium Construction — Made from aerospace-grade 7075-T6 aluminium alloy, these camber links are stronger than titanium whilst weighing considerably less than steel, providing the optimal combination of rigidity and lightweight performance that serious RC competitors demand.
• Hollow Tube Design — The intelligent hollow tube construction maximises structural rigidity where it matters most whilst minimising rotational mass, a critical factor in suspension responsiveness and cornering performance on both road courses and off-road circuits throughout the UK.
• Orange Anodised Finish — The brilliant orange anodised finish provides exceptional corrosion resistance and UV protection, ensuring your camber links maintain their appearance and function through countless hours of use and weathering common to UK RC racing conditions.
• Pre-Assembled with Rod Ends and Hollow Balls — These camber links arrive fully assembled with professional-grade rod ends and hollow ball joints, eliminating tedious assembly and ensuring consistent quality standards straight from the Traxxas factory.
• Precision Turnbuckle Design — The turnbuckle-style adjustment mechanism allows for precise micro-adjustments to camber angle, enabling drivers to optimise their suspension geometry with single-click precision for specific track conditions and driving styles.
• Machined Groove for Left-Hand Threads — A clearly visible machined groove identifies the left-hand threaded components, preventing confusion during setup and ensuring you adjust the correct direction when fine-tuning your suspension.
• Included Aluminium Wrench — The purpose-designed aluminium wrench provided in the box prevents marring or scratching of your turnbuckles and suspension components during adjustment, protecting the finish and longevity of your setup.
• Lightweight Performance Engineering — By reducing unsprung mass in your suspension, these aluminium camber links improve your RC car's ability to follow track contours and respond to driver inputs, a measurable advantage in competitive racing environments.
• Drag Slash Compatibility — Engineered specifically for the Traxxas Drag Slash, these rear camber links integrate seamlessly with your vehicle's existing suspension geometry and adjustment points for straightforward installation.

Technical Performance

The Traxxas rear camber links represent a remarkable achievement in RC suspension engineering. Manufactured from premium 7075-T6 aluminium, these components deliver strength characteristics that exceed titanium alloys whilst maintaining significantly lower weight than conventional steel turnbuckles. The unique hollow tube design is the secret to their exceptional performance — by strategically removing material from non-critical areas whilst reinforcing load-bearing zones, Traxxas engineers have created suspension links that are simultaneously lighter, stronger, and more responsive than conventional solid designs. The 56mm centre-to-centre tube length is precisely calculated for the Drag Slash's suspension geometry, ensuring optimal adjustment range and camber angle consistency. The rod end and hollow ball assemblies utilise precision manufacturing standards that eliminate play and slop, critical factors when fine-tuning suspension behaviour on competition courses throughout the United Kingdom. The anodised finish isn't merely cosmetic — it provides a hard oxide layer that protects against corrosion from track oils, moisture, and the harsh conditions encountered during intense RC racing sessions. When you're dialling in your RC car's suspension for a specific circuit or weather condition, the precision of these turnbuckles means you can trust that your adjustments will hold firm through demanding cornering forces and repeated high-speed runs.

What's in the Box

• Camber links, rear — 2 pieces (tubes orange-anodised, 7075-T6 aluminium)
• Rod ends and hollow balls — pre-assembled and ready to install
• Aluminium wrench — included for adjustment and to prevent component marring

Frequently Asked Questions

• What is camber and why do I need to adjust it on my RC car? — Camber is the angle of your wheels relative to the vertical plane when viewed from the front or rear of your vehicle. Adjusting camber angle affects how your tyres contact the track surface, influencing cornering grip, tyre wear patterns, and overall handling balance. On a circuit, negative camber (wheels tilted inward at the top) typically provides better cornering performance, whilst adjusting camber for specific track conditions and weather is essential for competitive lap times.
• Are these camber links suitable for beginners? — Whilst these are professional-quality components, they are straightforward to install on compatible vehicles. However, understanding suspension geometry and having experience with suspension tuning is beneficial to gain full advantage of the adjustment capability these links provide. Beginners should pair these with learning resources about RC suspension setup to maximise their investment.
• Will these fit my Traxxas vehicle? — These rear camber links are specifically engineered for the Traxxas Drag Slash. Compatibility with other Traxxas models should be verified against your vehicle's specifications and suspension geometry before purchase. Check your user manual or contact RC Model Shop for compatibility confirmation on other models.
• What makes 7075-T6 aluminium better than other materials? — 7075-T6 is an aerospace-grade aluminium alloy with exceptional strength-to-weight ratio. It's stronger than titanium in many applications whilst remaining significantly lighter than steel, making it ideal for suspension components where both rigidity and lightweight performance are critical. The T6 heat treatment process ensures optimal hardness and durability.
• How do I use the included wrench? — The aluminium wrench is specifically sized to fit the turnbuckle adjustment nuts on these camber links. Using the provided wrench prevents damage to the finish and threading compared to using standard wrenches, which can mar the aluminium surfaces during adjustment.
• Can I adjust these camber links for different track conditions? — Yes, the turnbuckle design allows precise adjustment of camber angle to suit specific track surfaces, weather conditions, and driving styles. Simply use the included wrench to lengthen or shorten the link, which adjusts your vehicle's camber geometry accordingly.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Camber links, rear (Tubes Orange-anodised, 7075-T6 aluminium, stronger than Titanium) (2) (assembled with rod ends and hollow balls) / aluminium wrench (1) (fits Drag Slash) TRX2443T today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.