Product Details
RC Overhaul's table top sized SeeSaw obstacle for 1/24th and 1/18th scale vehicles is a pivotal obstacle for any indoor/outdoor crawler set up! Made from laser cut wood pieces, it comes flat packed and in a matter of 30 minutes you can have this obstacle built and ready for action. A feature of this SeeSaw is the optional use return mechanism which means once you've conquered the obstacle the bridge position returns to the same start position making it a one way obstacle thanks to a tensioned elastic band mechanism. Or you can choose to use it without this mechanism and it will stay down once you've made your crossing. As the bridge is made from untreated laser cut wood it is a blank canvas for the imagination, allowing you to keep it as bare wood or with the use of glue, sand, paint and other modeling decoration methods to bring this SeeSaw obstacle to life. Economically priced it is a must have for anyone looking to build and create their own crawler course!
- Brand: RC Overhaul
- Model Number: G-RCO-CR025
- EAN: 5055320230175
- Product Type: SeeSaw Obstacle
- Scale Compatibility: 1/24th and 1/18th
- Height: 262mm
- Length: 600mm
- Width: 185mm
- Construction Material: Precision laser-cut wood
- Finish: Untreated wood (customisable)
- Delivery Format: Flat-packed
- Assembly Time: Approximately 30 minutes
- Return Mechanism: Optional elastic-band system for automatic reset
- Operation Modes: Two-mode—with return mechanism for one-way obstacle or without for static finish position
- Use Environment: Suitable for indoor and outdoor crawler courses
- Compatible Vehicles: Axial SCX24 Jeep Wrangler JLU, Axial SCX24 1967 Chevrolet C10, Axial SCX24 Lexus GX 470, Axial SCX24 Base Camp, Axial SCX24 Ford Bronco, Axial SCX24 Toyota 4Runner, Axial SCX24 Dodge Power Wagon, Axial SCX24 Deadbolt, Traxxas TRX-4M Ford Bronco 1/18, Traxxas TRX-4M Land Rover Defender 1/18, Traxxas TRX-4M Chevrolet K10 1/18, Traxxas TRX-4M Ford F-150 1/18
Overview
The RC Overhaul Crawler SeeSaw Obstacle is an essential addition to any RC crawler course setup, whether you're building an indoor or outdoor trail in the UK or beyond. Designed specifically for 1/24th and 1/18th scale RC crawlers, this tabletop-sized wooden obstacle brings genuine technical challenge and realism to your micro crawler experience. If you're serious about creating professional-looking crawler courses that test your RC car UK skills, this pivoting seesaw obstacle delivers the complexity and visual appeal you need without requiring complex electronics or permanent installation.
Built from precision laser-cut wood pieces, the SeeSaw Obstacle arrives flat-packed and ready for assembly. Unlike ready to run RC models that come pre-built, this obstacle offers something unique: a hands-on building experience that teaches you construction skills while creating a stunning centrepiece for your crawler park. The clever design includes an optional elastic-band return mechanism that automatically resets the bridge after each crossing, creating a one-way obstacle that genuinely tests your driving ability and vehicle control. Whether you're piloting an Axial SCX24 Jeep Wrangler, a Traxxas TRX-4M Ford Bronco, or any other compatible 1/24th or 1/18th scale crawler, this obstacle will challenge you to master precision driving and weight management.
Economically priced and infinitely customisable, the RC Overhaul SeeSaw Obstacle represents outstanding value for anyone looking to expand their crawler course without expensive commercial infrastructure. The untreated laser-cut wood provides a blank canvas for your creativity, allowing you to paint, sand, glue and detail it to match your scenic vision or maintain it in its natural state. This is truly a must-have accessory for serious RC crawling enthusiasts who want to build and create their own bespoke crawler courses.
Key Features
- Compatible with 1/24th and 1/18th Scale Crawlers — This obstacle is specifically engineered to work perfectly with popular micro crawler scales including the Axial SCX24 range and Traxxas TRX-4M series, making it an ideal addition to your existing RC car UK collection without compatibility concerns.
- Precision Laser-Cut Wooden Construction — Every component is cut with laser precision from quality wood, ensuring accurate assembly and smooth operation with no warping or poor fit, which means your obstacle will perform consistently and look professional.
- Flat-Packed Delivery with Quick Assembly — The obstacle arrives disassembled in compact packaging, but you can build it in approximately 30 minutes using basic tools, making it accessible to hobbyists of all experience levels.
- Optional Elastic-Band Return Mechanism — The ingenious elastic return system automatically resets the bridge to its starting position after each crossing, preventing vehicles from driving back and creating a genuinely challenging one-way obstacle that tests your driving skills.
- Flexible Operation Modes — You can choose to use the return mechanism for automatic reset and maximum difficulty, or omit it entirely and let the bridge stay down once crossed, giving you complete control over obstacle difficulty and your crawler course design.
- Untreated Wood Finish for Customisation — The blank canvas surface allows unlimited creative finishing options including paint, stain, sand texture, realistic rock detailing, weathering effects and scenic materials to match your crawler park aesthetic.
- Suitable for Indoor and Outdoor Use — Whether you're running your RC crawlers in your garden, a dedicated indoor space or at RC events, this obstacle handles both environments effectively and stores easily between sessions.
- Pivoting Seesaw Design — The balanced bridge design creates a dynamic obstacle that shifts weight distribution as your crawler climbs and descends, genuinely testing your understanding of vehicle weight transfer and suspension control.
Technical Performance
The RC Overhaul SeeSaw Obstacle represents intelligent obstacle design engineering optimised specifically for the growing micro crawler market. Measuring 600mm in length, 185mm in width and 262mm in height, these dimensions are carefully calculated to present a genuine challenge to 1/24th and 1/18th scale vehicles without being impossibly steep or requiring extreme vehicle modifications. The laser-cut wooden construction is not a compromise—it's a deliberate engineering choice that provides sufficient structural integrity to support repeated crossings by RC crawlers weighing several hundred grams, whilst remaining light enough that the elastic return mechanism can reliably reset the bridge. The precision of laser cutting ensures that all components mate perfectly, eliminating assembly frustration and wobbling joints that would undermine performance. The untreated wood surface offers excellent grip characteristics for crawler tyres, providing realistic traction behaviour that mirrors natural rock obstacles. The optional elastic-band return system is engineered as a tensioned mechanism that reliably activates after each crossing, making the obstacle genuinely one-directional when the return feature is employed. For builders who want a static finish position, simply omitting the return band allows the bridge to remain in its down position once crossed, giving you two completely different obstacle behaviours from a single component. The modular flat-packed approach means you can build multiple copies to create complex course sequences, and the customisation potential means you can age, weather and detail each one differently to create a truly unique crawler park.
What's in the Box
- Precision laser-cut wooden components for complete seesaw assembly
- Elastic-band return mechanism (optional use)
- Assembly instructions
- Flat-packed delivery format requiring basic assembly
Frequently Asked Questions
- Which RC crawlers are compatible with the SeeSaw Obstacle? — This obstacle is engineered for 1/24th and 1/18th scale crawlers. The manufacturer specifies compatibility with the full Axial SCX24 range including the Jeep Wrangler JLU, 1967 Chevrolet C10, Lexus GX 470, Ford Bronco, Toyota 4Runner, Dodge Power Wagon and Deadbolt variants, plus Traxxas TRX-4M models including the Ford Bronco, Land Rover Defender, Chevrolet K10 and Ford F-150. If you own any of these ready to run RC crawlers, this obstacle will integrate perfectly into your setup.
- How long does assembly take and what tools do I need? — Typical build time is approximately 30 minutes from flat-packed components. The laser-cut precision means components fit together cleanly, and you'll need only basic tools and possibly wood glue to assemble the obstacle. No specialist equipment or advanced woodworking skills are required.
- Can I use the obstacle with or without the return mechanism? — Yes, this is one of the clever design features. With the elastic return band engaged, the bridge automatically resets after each crossing, creating a one-way obstacle. Without the return band, the bridge remains in its down position once crossed, allowing vehicles to traverse it like a static bridge. This dual-mode capability means you can vary difficulty and obstacle behaviour based on your preferences.
- What finishing options are available for the untreated wood? — The blank untreated wood is ready for any finishing technique you choose. You can leave it natural for a rustic appearance, paint it with acrylics or RC-specific paints, stain it with wood stain, add sand texture with PVA glue and fine sand, weathering powders for realism, realistic rock detailing with texture paste, or moss and vegetation effects using hobby materials. This makes every builder's version unique and tailored to their crawler park aesthetic.
- Is this obstacle suitable for beginners? — Absolutely. Assembly is straightforward with clear construction, and the obstacle's design naturally teaches precision driving skills without requiring advanced vehicle modifications. Beginners benefit from the visual and physical challenge it presents, whilst experienced crawlers appreciate the technical difficulty it introduces to their courses.
- What are the exact dimensions and will it fit in my space? — The obstacle measures 600mm in length, 185mm in width and 262mm in height. These proportions make it suitable for tabletop setups and moderate-sized crawler courses. It's substantial enough to present genuine challenge but compact enough for indoor hobby rooms and modest garden spaces.
- Can I build multiple obstacles to create complex courses? — Yes. The flat-packed modular design allows you to purchase multiple SeeSaw Obstacles and arrange them in sequences, creating sophisticated course layouts. Each can be finished differently, adding visual variety to your crawler park.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RC Overhaul Crawler SeeSaw Obstacle 1:24th/1:18th G-RCO-CR025 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
