Product Description of Castle M-CC060-0093-00 1515-2200kV V2 sensored brushless motor 

The Castle M-CC060-0093-00 1515-2200kV V2 sensored brushless motor for 1/8 scale vehicles is a precision-engineered powerhouse built for monster trucks, truggies, and high-performance buggies running 2S–6S LiPo setups. This V2 edition features a redesigned rotor and stator assembly that dramatically reduces magnetic cogging, resulting in smoother startups, lower temperatures, and longer run times. With a 4-pole, 12-slot inrunner design, the motor delivers consistent torque and throttle response across demanding terrain and aggressive driving conditions. The Castle M-CC060-0093-00 4-pole motor with SmartSense startup and QuietSense sync integrates advanced sensor technology to eliminate startup hesitation and maintain ESC-motor synchronization at all times.

Key features of the Castle M-CC060-0093-00 1515-2200kV V2 motor

• Redesigned rotor and stator – reduces cogging and residual drag brake
• Kevlar-wrapped rotor – reinforced for high-RPM durability and structural integrity
• 180°C neodymium magnets – resist thermal degradation under extreme loads
• Oversized NMB bearings – extend operational lifespan and reduce vibration
• Low-resistance solder tabs – improve current flow and thermal efficiency
• SmartSense startup logic – delivers smooth launches and dynamic timing control
• QuietSense shielding – maintains clean sensor signals for consistent throttle response
• Rebuildable design – allows rotor, shaft, and bearing replacement
• CNC-machined end bells – enhance durability and precision fitment

How does the redesigned rotor and stator improve startup and efficiency?

The Castle M-CC060-0093-00 with redesigned rotor and stator for reduced cogging features a re-engineered magnetic layout that minimizes residual drag and startup stutter. This design improvement results in smoother launches and more predictable throttle behavior, especially in low-speed scenarios. By reducing magnetic resistance, the motor operates cooler and more efficiently, allowing users to push higher gear ratios without compromising runtime or thermal stability. The stator’s 0.2mm steel lamination stack further enhances magnetic precision and energy conversion.

Why is Kevlar reinforcement and high-temp magnet composition essential?

The Castle 1515 motor with Kevlar wrap and 180°C neodymium magnets is built to withstand the mechanical and thermal stress of high-RPM operation in heavy-duty 1/8 scale platforms. The Kevlar wrap maintains rotor integrity under centrifugal force, while the high-grade neodymium magnets resist demagnetization at elevated temperatures. This combination ensures consistent torque delivery and long-term reliability, even in monster trucks and truggies operating under extreme load conditions.

How do the bearings and solder tabs contribute to performance?

The Castle 2200kV motor with oversized NMB bearings and low-resistance solder tabs is optimized for durability and electrical efficiency. The oversized bearings reduce rotational friction and absorb vibration, protecting internal components from wear. Meanwhile, the gold-plated solder tabs offer low-resistance current pathways, minimizing heat buildup and maximizing power transfer. These features work together to extend motor life and maintain consistent performance across varied terrain and driving styles.

What makes SmartSense and QuietSense technologies critical for throttle control?

The Castle M-CC060-0093-00 4-pole motor with SmartSense startup and QuietSense sync integrates sensor-based timing logic to eliminate cogging and maintain ESC-motor synchronization. SmartSense uses rotor position data to initiate smooth launches and dynamically adjusts timing as load conditions change. QuietSense shields the sensor board from magnetic interference, ensuring clean signal transmission and consistent throttle response. Together, these technologies deliver buttery smooth control and peak efficiency throughout the throttle range.

Is the Castle 1515-2200kV V2 motor suitable for heavy-duty applications?

Absolutely. The affordable Castle 1515-2200kV V2 motor with rebuildable design and CNC end bells is ideal for 1/8 scale monster trucks, truggies, and on-road vehicles up to 15 lbs. Its robust construction, sensor integration, and thermal resilience make it a reliable choice for high-power applications. The CNC-machined aluminum end bells provide structural rigidity and precise alignment, while the rebuildable architecture allows users to maintain peak performance over time.

Why is this motor the best Castle upgrade for runtime and throttle smoothness?

The Castle M-CC060-0093-00 1515-2200kV V2 sensored brushless motor for 1/8 scale vehicles combines advanced engineering, sensor sophistication, and rugged materials to deliver a premium driving experience. Its redesigned internals reduce cogging and heat, while SmartSense and QuietSense technologies ensure consistent timing and throttle control. Whether you're bashing through rough terrain or racing on-road, this motor is the best Castle upgrade for buttery smooth throttle and longer run times.

For RC enthusiasts seeking a sensored motor with high-efficiency winding, thermal resilience, and rebuildable architecture, the Castle M-CC060-0093-00 sensored inrunner motor with 5mm shaft and 6.5mm bullet connectors offers unmatched value and performance. Buy Castle M-CC060-0093-00 sensored motor for 2S–6S monster trucks and truggies.

Technical Specifications of Castle M-CC060-0093-00 1515-2200kV V2 sensored brushless motor 

Brand, Model and Product Type

• Brand: Castle Creations
• Model: M-CC060-0093-00
• Product Type: Castle M-CC060-0093-00 1515-2200kV V2 sensored brushless motor for 1/8 scale vehicles, Castle M-CC060-0093-00 4-pole motor with SmartSense startup and QuietSense sync, Castle M-CC060-0093-00 sensored inrunner motor with 5mm shaft and 6.5mm bullet connectors, Castle M-CC060-0093-00 with redesigned rotor and stator for reduced cogging, Castle 1515 motor with Kevlar wrap and 180°C neodymium magnets, Castle 2200kV motor with oversized NMB bearings and low-resistance solder tabs

Dimensions

• Motor Length: 7.5 cm – compact housing for high-efficiency internals
• Motor Diameter: 4 cm – optimized for 1/8 scale chassis integration
• Shaft Diameter: 0.5 cm – precision-machined for secure gear mounting
• Shaft Length: 2 cm – supports standard pinion configurations
• Product Weight: 426 g – engineered for stability and vibration resistance

Motor Architecture and Performance

• Motor Type: Brushless – designed for high efficiency and minimal maintenance
• Motor Design: Inrunner – enclosed rotor configuration for consistent torque output
• Number of Poles: 4 – enhances startup torque and throttle precision
• Slot Configuration: 12-slot – improves magnetic efficiency and reduces heat generation
• RPM/Volt (Kv): 2200 kV – tuned for 2S–6S LiPo systems in 1/8 scale platforms
• Input Voltage Range: 2S–6S LiPo – compatible with a wide range of power setups
• Application: Ideal for 1/8 scale buggies, truggies, on-road vehicles and 1/10 scale monster trucks up to 15 lbs

Materials and Build Quality

• Rotor Reinforcement: Kevlar wrap – maintains structural integrity under high RPM stress
• Magnet Composition: 180°C grade neodymium sintered magnets – resist thermal degradation
• Bearings: Oversized NMB bearings – reduce vibration and extend operational lifespan
• Stator Assembly: High-performance 0.2mm steel lamination stack – improves magnetic precision and efficiency
• Solder Tabs: Gold-plated, low-resistance – maximize current flow and reduce heat buildup
• End Bells: CNC-machined T6 aluminum – enhance durability and alignment accuracy

Connectivity and Compatibility

• Connector Type: 6.5 mm bullet – ensures secure, low-resistance power transfer
• Wire Gauge: 10AWG high-strand-count silicone-insulated – supports high current loads
• Sensor Port: ROAR standard – ensures compatibility with sensored ESCs
• Recommended ESCs: Castle Mamba Max Pro, Mamba X, or Mamba Monster X – optimized for full SmartSense functionality

Integrated Technologies

• SmartSense: Sensor-based startup logic – delivers smooth launches and dynamic timing control
• QuietSense: Shields sensors from magnetic field noise – maintains ESC-motor synchronization
• Sensor Alignment: Automatically delivers uniform timing and torque – no mechanical adjustment required

Rebuildability and Maintenance

• Design: Rebuildable – allows replacement of rotor, shaft, and front end bell with bearings

What’s in the Box

• (1) Castle 1515-2200kV V2 4-Pole Sensored Brushless Motor – model M-CC060-0093-00

What You Require

• (1) Compatible Brushless Electronic Speed Control – must support sensored operation

We want to make sure your delivery goes smoothly, so here are some important details about our service:

• For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
• Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
• Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
• If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
• We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
• As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
• If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
• For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.