Features
- All-new Ground up Design for Maximum Performance
- Designed Specifically for Smooth, Low Grip Tracks
- Tightly Packed Small Pins with Deep Sipes Create Unmatched Grip
- Run Harder Compounds but Still Have Good Grip
- Reduced Edginess for Effortless Control
Overview
This is a pair of Slide Lock 1:8 Buggy Tires. The Slide Lock is a unique new tire design from Pro-Line that is made specifically for smooth, low grip tracks. The Slide Lock features a pattern of small, tightly packed hexagon and triangle shaped pins so you can lay down as much rubber as possible. The tread on the new Slide Lock is laid out wider across the tire carcass for a flatter profile overall compared to other Pro-Line 1:8 Race Tires. Each hexagon pin has a deep sipe down the middle of the tread for added flex and grip on even the slickest of surfaces. The built-in tread flex means you can run harder compounds for longer wear and still have good traction when you need it. The large and stiff side pins reach far down the sidewall to reduce edginess as much as possible. Be the first at your track to win with Pro-Line’s new Slide Lock tire. Get yours today!
Search:
9064-03 | Slide Lock M4 (Super Soft) Off-Road 1:8 Buggy Tires for Front or Rear
Fits On
- 1:8 Buggy Wheels Front or Rear
Overview
The PRO 1/8 Slide Lock M4 Front/Rear Off-Road Buggy Tires represent a significant advancement in tyre technology from Pro-Line Racing, one of the world's most respected names in RC racing. This pair of high-performance 1/8 buggy tyres is engineered specifically for smooth, low-grip track surfaces, making them an essential choice for UK RC enthusiasts who compete on indoor carpet tracks or slick outdoor circuits. Whether you're a serious racer looking to shave seconds off your lap times or an ambitious hobbyist wanting to improve your competitive edge, the Slide Lock tyres deliver the precision grip and control needed to dominate your local RC club.
These tyres represent a ground-up design philosophy focused entirely on maximising performance in their intended environment. Pro-Line has invested considerable engineering effort into creating a tyre that doesn't compromise between grip and durability, allowing you to push harder compounds for extended wear whilst maintaining exceptional traction even on the slickest of surfaces. The Slide Lock is not just another off-road buggy tyre—it's a carefully considered solution to the specific challenges posed by smooth track conditions, where traditional tyre designs often struggle to deliver consistent performance. For anyone running a competitive 1/8 scale RC buggy in the UK, these tyres belong in your pit box.
Available now from RC Model Shop, your trusted UK RC retailer, the PRO 1/8 Slide Lock M4 Front/Rear Off-Road Buggy Tires G-PRO9064-03 are ready to help you take your racing to the next level. Whether used on the front or rear of your 1/8 buggy, these tyres deliver the performance characteristics that have made Pro-Line the choice of champions across the United Kingdom and beyond.
Key Features
- All-New Ground Up Design for Maximum Performance — Rather than incremental improvements to an existing design, the Slide Lock has been engineered from the foundation up specifically for smooth, low-grip track conditions, ensuring every aspect of the tyre is optimised for this challenging racing environment.
- Designed Specifically for Smooth, Low Grip Tracks — Unlike multi-purpose tyres that attempt to work across various track types, the Slide Lock is laser-focused on delivering exceptional performance where grip is limited, making it the ideal choice for carpet tracks and polished circuit surfaces commonly found at UK RC clubs.
- Tightly Packed Small Pins with Deep Sipes for Unmatched Grip — The tyre features a pattern of small, tightly packed hexagon and triangle-shaped pins, each with a deep sipe down the middle of the tread, creating multiple edges and flex points that generate grip even on the most challenging slick surfaces.
- Maximised Rubber Footprint with Wider Tread Layout — The tread pattern is laid out wider across the tyre carcass for a flatter profile overall compared to other Pro-Line 1/8 race tyres, allowing you to lay down as much rubber as possible and create a larger contact patch for enhanced traction.
- Run Harder Compounds with Maintained Grip — The built-in tread flex means you can run harder compound rubber for significantly longer wear and durability, whilst the engineered tread pattern still delivers good traction when you need it most, offering excellent value for regular racers.
- Reduced Edginess for Effortless Control — The large and stiff side pins reach far down the sidewall to reduce edginess as much as possible, allowing you to maintain precise control and predictable handling characteristics throughout the duration of your race or practice session.
- Deep Sipe Technology for Flex and Grip — Each hexagon pin features a deep sipe down the middle, providing additional flex in the tread block and creating multiple biting edges that work together to extract grip from even the slickest of surfaces.
- Front or Rear Compatibility — These tyres are designed to fit on 1/8 buggy wheels and can be used on either the front or rear of your vehicle, giving you flexibility in how you configure your buggy's tyre setup for optimal performance.
Technical Performance
The Slide Lock M4 represents Pro-Line's commitment to precision engineering and performance optimisation for competitive RC racing. The tyres are manufactured to exacting standards, with carefully calibrated tread patterns and pin geometries that work together to create a unique performance characteristic. The M4 designation indicates the compound hardness, selected to balance durability with grip potential on smooth, low-traction surfaces. The construction utilises closed-cell foam inserts included with each pair, which provide proper support and performance when mounted on compatible 1/8 buggy wheels. The wider tread layout across the tyre carcass creates a naturally flatter profile compared to other Pro-Line 1/8 race tyre offerings, fundamentally changing how the tyre interacts with the track surface. This design philosophy allows racers to run harder rubber compounds—extending the lifespan of each set of tyres—whilst the intelligent sipe design ensures that grip levels remain competitive throughout the tyre's usable life. The engineering behind the pin geometry, with its combination of tightly packed hexagons and triangles featuring deep sipes, creates multiple bite points and flexing areas that work in harmony to generate traction on smooth, low-grip surfaces where traditional designs often fall short. For UK RC buggy racers competing at clubs and organised events, the Slide Lock delivers the performance characteristics needed to be competitive at the highest levels of 1/8 buggy racing.
What's in the Box
- Slide Lock 1/8 Buggy Tires (pair)
- Closed Cell Foam Inserts (2)
Frequently Asked Questions
- What track surface are the Slide Lock tyres best suited for? — The Slide Lock tyres are specifically designed for smooth, low-grip track surfaces such as carpet tracks, polished concrete circuits, and other smooth racing environments. They are not optimised for high-grip tracks with significant texture or outdoor dirt surfaces where other tyre compounds would be more appropriate.
- Can I use these tyres on both the front and rear of my 1/8 buggy? — Yes, the PRO 1/8 Slide Lock M4 tyres are designed to fit on 1/8 buggy wheels and work effectively on either the front or rear of your vehicle, providing versatility in how you configure your tyre setup.
- What is the M4 compound and why does it matter? — The M4 designation indicates the hardness of the tyre compound. This particular compound has been selected to balance durability with grip potential on smooth, low-traction surfaces, allowing you to run harder rubber for longer wear whilst maintaining good traction performance throughout the tyre's usable life.
- Do these tyres come with foam inserts? — Yes, each pair of Slide Lock tyres comes complete with two closed-cell foam inserts, which are essential for proper support and performance when mounted on compatible 1/8 buggy wheels.
- How do the deep sipes improve performance? — Each hexagon pin features a deep sipe down the middle of the tread, which creates additional flex in the tread block and generates multiple biting edges. These features work together to extract maximum grip from smooth, low-grip surfaces and improve overall traction and handling consistency.
- Are these tyres suitable for beginners? — Whilst these are high-performance competition tyres optimised for smooth, low-grip tracks, they are suitable for any buggy racer—from beginners to experienced competitors—who races on carpet tracks or smooth circuits. Beginners may find the Slide Lock's reduced edginess particularly helpful for maintaining control as they develop their driving technique.
- What makes the Slide Lock different from other Pro-Line 1/8 race tyres? — The Slide Lock features a wider tread layout across the tyre carcass for a naturally flatter profile compared to other Pro-Line 1/8 race tyres. This design, combined with the tightly packed small pins, deep sipes, and stiff side pins, creates a unique performance characteristic specifically optimised for smooth, low-grip track surfaces where other designs may struggle.
- How long will these tyres last? — The Slide Lock's design allows you to run harder compounds for longer wear without sacrificing grip. The actual lifespan depends on driving intensity, track conditions, and maintenance, but the engineered compound selection means you can expect excellent durability compared to softer compound alternatives.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the PRO 1/8 Slide Lock M4 Front/Rear Off-Road Buggy Tires (2) G-PRO9064-03 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
