Overview
The Blade Main Blade Grips (Z-BLH3401) are essential replacement components for your Blade 180 CFX micro helicopter. Whether you're recovering from a crash, performing routine maintenance, or upgrading your aircraft, these genuine Blade parts ensure your helicopter maintains optimal performance and reliability. As a critical component in the main rotor assembly, quality blade grips are fundamental to smooth, stable flight characteristics and the overall safety of your RC micro helicopter UK experience.
These main blade grips are specifically engineered for the Blade 180 CFX platform, one of the most popular micro helicopters in the UK RC market. Micro helicopter flying demands precision engineering and reliable components, and Blade delivers both with their OEM (original equipment manufacturer) parts. Whether you're a weekend flyer enjoying casual hovering in the garden or someone progressing through the learning curve of RC helicopter control, having genuine replacement grips on hand ensures you can get back in the air quickly after incidents or planned maintenance cycles.
RC Model Shop specialises in stocking authentic Blade spare parts and accessories for the 180 CFX platform. Our comprehensive range includes main blades, feathering spindles, rotor head assemblies, main shafts, bearings, linkages and electronics from trusted brands including Blade, Spektrum, Overlander and E-Flite. We understand that RC helicopter enthusiasts in the UK need access to quality spares without delay, which is why we maintain extensive stock levels and provide expert guidance on part compatibility and installation.
Key Features
- Genuine Blade OEM Component — These main blade grips are manufactured by Blade as original equipment parts, meaning they are engineered to exact specifications and deliver the performance and reliability that Blade 180 CFX owners expect and depend on for consistent flight characteristics.
- Direct Compatibility with Blade 180 CFX — Engineered specifically for the Blade 180 CFX micro helicopter platform, these grips ensure perfect fit and function without modification, allowing you to restore your helicopter to factory specification after damage or wear.
- Critical Main Rotor Assembly Component — The blade grips form a vital part of the main rotor head assembly, directly influencing blade pitch control, rotor stability and overall flight smoothness, making them essential for maintaining your helicopter's performance envelope.
- Durable Design for Extended Use — Built to withstand the stresses of repeated takeoffs, landings, and flight manoeuvres, these grips maintain their integrity through countless flight cycles whilst supporting precise blade articulation.
- Easy Installation and Replacement — Designed for straightforward removal and installation, these blade grips can be quickly replaced when needed, minimising downtime and allowing you to resume flying sooner.
- Perfect for Repair and Maintenance — Whether you're rebuilding after a crash, performing scheduled maintenance, or upgrading your 180 CFX setup, these genuine grips are the correct choice for maintaining factory-standard performance.
Technical Performance
The Blade Main Blade Grips (Z-BLH3401) are precision-engineered components that play a fundamental role in the main rotor head assembly of the Blade 180 CFX micro helicopter. These grips interface directly with the feathering spindle and swashplate mechanism, translating pilot control inputs into precise blade pitch adjustments that govern lift, stability and directional control. The engineering tolerances in these components are exceptionally tight, as even minor variations can affect blade tracking and flight stability. Blade's manufacturing standards ensure that replacement grips maintain the same performance characteristics as the original components, allowing you to restore your helicopter to its intended flight envelope. The material composition and design of the grips have been optimised for durability under the cyclic stresses imposed by helicopter rotor dynamics, whilst remaining lightweight to minimise inertial loads on the main shaft and bearing assemblies. For UK RC helicopter enthusiasts, maintaining access to genuine Blade spare parts like these grips is essential for keeping your 180 CFX flying reliably. When combined with other key components such as the feathering spindle set, rotor head block and main shaft set, the blade grips ensure that the entire main rotor head assembly functions as an integrated system delivering precise, predictable control response.
What's in the Box
- Blade Main Blade Grips for 180 CFX (genuine OEM component)
What You Need to Complete
- Blade 180 CFX helicopter (compatible platform)
- Basic tools for removal and installation of rotor head components
- Thread-lock compound for securing fasteners (recommended for metal-to-metal connections)
Frequently Asked Questions
- Are these blade grips compatible with my Blade 180 CFX helicopter? — Yes, the Z-BLH3401 main blade grips are engineered specifically for the Blade 180 CFX micro helicopter platform. To confirm compatibility, check the part number on your original grips or consult your helicopter manual. RC Model Shop recommends matching the Blade part number from your manual or original component to ensure perfect fit and function.
- Why do I need to replace my blade grips? — Blade grips may require replacement after crash damage, normal wear from extended flying, or as part of a preventive maintenance programme. Even minor cracks or stress marks can affect blade pitch control precision and flight stability, so replacement ensures your helicopter maintains optimal performance. Keeping spare blade grips in your repair kit allows you to get back in the air quickly after incidents.
- How difficult is it to install these blade grips? — Installation difficulty depends on your mechanical experience and familiarity with helicopter rotor head assemblies. The grips form part of the main rotor head assembly and require removal of the rotor mast and other components. RC Model Shop recommends consulting your Blade 180 CFX manual for detailed installation instructions. After installation, you should check blade balance, apply thread-lock to metal-to-metal fasteners as required, and reset your helicopter's pitch and gyro settings to ensure correct control response.
- What other parts might I need to order with my blade grips? — When replacing blade grips, consider ordering a complete feathering spindle set (BLH3403), rotor head block (BLH3404), and rotor head linkage set (BLH3405) to ensure all components in the main rotor head assembly are in good condition. If you're experiencing vibration or tracking issues, the main bearing block set (BLH3411) and main shaft set (BLH3407) may also require inspection. RC Model Shop carries all of these components in stock or can advise on availability.
- Should I replace other rotor head components when I replace the blade grips? — For optimal results, RC Model Shop recommends inspecting the complete rotor head assembly including the feathering spindle, swashplate, rotor head block and linkages. If you're rebuilding after a significant crash, consider replacing the main shaft set and bearings together with the blade grips to maintain smooth tracking and eliminate potential wobbles or vibrations. This approach ensures that all components in the assembly are fresh and properly aligned.
- Is this suitable for beginners? — Blade 180 CFX helicopters are genuinely beginner-friendly platforms, but blade grip replacement requires mechanical confidence and familiarity with rotor head assembly. Beginners should refer to detailed manuals, online guides or seek assistance from experienced RC helicopter flyers before attempting rotor head work. The good news is that these parts are relatively affordable, so keeping spares on hand is practical insurance against the inevitable learning curve crashes.
- Where can I find installation guides for blade grip replacement? — Your Blade 180 CFX manual contains detailed exploded diagrams and assembly instructions for the rotor head assembly. Many UK RC helicopter forums and YouTube channels also feature detailed 180 CFX build and repair tutorials. RC Model Shop staff can provide advice on compatibility and sourcing related parts, helping you source everything needed for your repair project.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Blade Main Blade Grips: 180 CFX, 130 S, 150 S Z-BLH3401 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
