Overview
The Traxxas Gear, 26-T pinion (1.0 metric pitch) (fits 5mm shaft) with set screw is an essential performance tuning component for RC enthusiasts across the UK who demand precise control over their vehicle's acceleration and top speed characteristics. Whether you're piloting a brushless RC monster truck, a high-speed short course truck, or any other Traxxas model equipped with a 5mm motor shaft, this 26-tooth pinion gear provides the flexibility to fine-tune your setup for optimal performance in any running condition. As a recognised Traxxas spare part, this pinion gear is manufactured to exacting OEM standards, ensuring reliability and compatibility with your existing transmission system.
Changing gear ratios is one of the most straightforward yet effective ways to optimise your RC car's performance. A 26-tooth pinion gear represents a specific ratio choice that allows you to adjust the balance between acceleration response and maximum velocity. Whether you're racing competitively, bashing for weekend fun, or experimenting with different setups to find what works best for your driving style, having quality pinion gears in your spares box is essential. The Traxxas 26-T pinion gear delivers consistent, reliable performance lap after lap, helping you extract maximum potential from your brushless RC vehicle.
This pinion gear is compatible with a wide range of modern Traxxas models including the Maxx Slash 1/8 4WD 6S brushless short course truck, the WideMaxx monster truck platform, and the XRT extreme truck range. If you're serious about optimising your RC car UK setup and achieving the perfect gearing combination for your chosen terrain and driving conditions, this is a spare part you should have readily available.
Key Features
- 26-tooth configuration — This specific tooth count provides a balanced approach to gear ratio selection, allowing you to fine-tune the acceleration and top speed characteristics of your Traxxas RC vehicle to suit different running conditions and driving preferences.
- 1.0 metric pitch (Mod 1) — The 1.0 metric pitch specification ensures precise meshing with compatible spur gears in your transmission, delivering smooth power transfer and reducing noise and wear during operation.
- 5mm bore diameter — This pinion gear is engineered to fit directly onto 5mm motor shafts found in modern Traxxas brushless systems, guaranteeing secure and accurate alignment without modification.
- Includes set screw — The included set screw securely locks the pinion gear onto your motor shaft, preventing slippage during acceleration and ensuring the gear ratio remains constant throughout your driving session.
- OEM Traxxas quality — Manufactured to original equipment manufacturer standards, this pinion gear delivers the durability and precision expected from genuine Traxxas components, protecting your investment in your RC car.
- Performance tuning flexibility — By swapping pinion gears of different tooth counts, you can easily adjust your vehicle's gearing without purchasing additional transmission components, making this an economical way to optimise performance.
- Wide model compatibility — This pinion gear works with numerous Traxxas vehicles across different scales and platforms, from the compact Slash to the large WideMaxx and XRT ranges.
Technical Performance
The Traxxas 26-T pinion gear represents precision engineering at the component level. Manufactured from hardened steel or equivalent durable material, this pinion delivers exceptional wear resistance even under the demanding conditions of competitive racing or aggressive weekend bashing. The 1.0 metric pitch specification (also known as Mod 1) is the industry standard for Traxxas brushless RC vehicles, ensuring perfect compatibility with factory spur gears. The 26-tooth count positions this gear in the mid-range of available ratios, making it suitable for balanced performance where you want neither extreme acceleration nor maximum top speed, but rather a harmonious blend of both. When paired with compatible spur gears in your transmission, this pinion operates with minimal backlash and noise, contributing to overall drivetrain efficiency. The 5mm bore accommodates the standard motor shafts found in Traxxas brushless systems including the VXL range of electronic speed controllers. The included set screw is precision-engineered to lock securely without damaging the motor shaft, a critical detail that prevents gear slippage during high-torque acceleration events. Whether you're running a 3S, 4S, or higher LiPo battery configuration, adjusting to a different pinion gear count is one of the most effective tuning methods available to RC enthusiasts seeking performance optimisation without major component replacement.
What's in the Box
- 26-tooth pinion gear (1.0 metric pitch)
- Set screw for motor shaft installation
Frequently Asked Questions
- What does a pinion gear do in an RC car? — The pinion gear meshes with your vehicle's spur gear to form the transmission ratio. By changing the pinion tooth count, you adjust how much torque and speed is delivered from your motor to the wheels. A higher tooth count (more teeth) typically results in faster top speed but slower acceleration, whilst a lower tooth count provides quicker acceleration but lower top speed. The 26-tooth option offers a balanced middle ground.
- How do I know if this 26-T pinion is compatible with my Traxxas model? — This pinion gear is confirmed compatible with multiple Traxxas vehicles including the Maxx Slash 1/8 4WD short course truck (all colour variants), WideMaxx monster truck, and XRT VXL-8S extreme truck models. Consult your vehicle's owner's manual to confirm the recommended gearing options for your specific model, as different platforms may have different optimal ratio recommendations.
- Will changing to a 26-T pinion gear improve my RC car's performance? — Performance improvement depends on your current setup and running conditions. If you're currently under-geared (experiencing too much acceleration but limited top speed), upgrading to a 26-tooth pinion will increase your maximum velocity. Conversely, if you're over-geared, switching to a 26-T may improve acceleration response. The best approach is to consult your Traxxas manual for recommended gearing and experiment with different ratios to find what suits your driving style and terrain.
- Is this pinion gear suitable for beginners? — Yes, absolutely. Whilst gear ratio adjustment is a performance tuning technique, simply installing a compatible pinion gear is straightforward for anyone with basic mechanical knowledge. However, beginners should always consult their vehicle's manual to understand which pinion tooth count is recommended for their specific model before making changes.
- What makes Traxxas pinion gears different from aftermarket alternatives? — Traxxas OEM components are engineered specifically for Traxxas vehicles, ensuring perfect tolerances and compatibility. The 1.0 metric pitch specification, 5mm bore diameter, and hardened steel construction meet original specifications, guaranteeing reliability and eliminating potential fitment or wear issues that might arise from non-genuine components.
- Do I need any tools to install this pinion gear? — You'll need basic tools including a hex wrench to remove your motor from the transmission housing, and potentially a small screwdriver or hex key to tighten the included set screw. Your vehicle's owner's manual provides detailed installation instructions.
- What battery type does this pinion gear work with? — This is a purely mechanical component that works with any battery type compatible with your Traxxas vehicle. Whether you're running 2S, 3S, 4S, or 6S LiPo batteries, the pinion gear performs identically. The battery determines available power, whilst the pinion gear determines how that power is distributed between acceleration and top speed.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Gear, 26-T pinion (1.0 metric pitch) (fits 5mm shaft) with set screw today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: Traxxas
- Part Number: TRX6497
- EAN: 0020334649706
- Product Type: Pinion Gear
- Number of Teeth: 26
- Gear Pitch: 1.0 Metric (Mod 1)
- Bore Diameter: 5mm
- Shaft Compatibility: 5mm motor shaft
- Included Accessories: Set screw
- Compatible Models: Traxxas Maxx Slash 1/8 4WD 6S Brushless Short Course Truck (Rock N Roll, Blue, Red, Green variants), Traxxas WideMaxx Monster Truck (Rock N Roll, Green, Red variants), Traxxas XRT VXL-8S (Blue, Orange, Green, Black variants), Traxxas XRT Ultimate (Green X, Blue X variants)
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
