Hobbywing Ezrun MAX10 G2S 140A Brushless Combo with the matching Ezrun 3665SD G3 3200kV motor combines a perfectly matched 1:10 scale drive system straight from the factory for exceptional performance.
The MAX10 G2S is the logical evolution of the MAX10 G2: it features the same power specs and casing but now allows controller programming directly via smartphone without any additional devices. The integrated Bluetooth module is built into the switch, connecting seamlessly to your phone through the HW-LINK app for easy configuration, data analysis, and firmware updates. New additions compared to the G2 include internal data logging and a third BEC voltage level at 8.4V for high-voltage servos.
This combination unlocks the controller's full potential: the exclusive Turbo Timing function can be activated only with Hobbywing motors, increasing the maximum rpm by up to approximately 25%. Additionally, the motor overheat protection works solely with compatible Hobbywing motors. Both features are ready to use with the included Ezrun 3665SD G3 motor.
Features
- Bluetooth module integrated in the switch for direct programming via smartphone, no extra devices needed.
- Internal data logging of the last 10 minutes of runtime, viewable graphically in the HW-LINK app.
- Turbo Timing adjustable up to 32 degrees – boosts max rpm by ~25% with the included motor.
- 3-stage BEC output: 6V / 7.4V / 8.4V at 5A in switch mode.
- Fanless design with side air exhaust, temperature-controlled activation.
- Dust- and waterproof controller and motor rated to IP67, with waterproof sensor cable.
- Overheat protection for capacitors.
- Protection against low voltage, overheating, and signal loss.
- 4-pole rotor delivers high torque, quick acceleration, and stable performance.
- CNC-machined aluminum housing and high-precision bearings in the motor.
Specifications
Controller (Ezrun MAX10 G2S 140A)
Type: 1/10 brushless, sensored and sensorless
Current (continuous/peak): 140A / 880A
Input voltage: 2-4S LiPo
BEC: selectable 6V / 7.4V / 8.4V, 5A continuous (switch mode)
Motor limits:
- 2S LiPo: KV ≤ 6000 (3652 motor)
- 3S LiPo: KV ≤ 4000 (3665 motor)
- 4S LiPo: KV ≤ 2600 (4268 motor)
Turbo Timing: Up to 32 degrees
Fan: Yes, powered by BEC
Programming: Bluetooth (HW-LINK app), LCD programmer, OTA module, separate 3-pin programming port
Waterproof: IP67 rated
Connectors: XT60 input, gold-plated output
Dimensions: 53 x 39.5 x 37.2 mm
Weight: 125 g (including cables and connectors)
Applications: 1/10 Short Course Truck, Truck, Monster Truck
Motor (Ezrun 3665SD G3)
Type: Brushless, sensored
KV rating: 3200kV
No-load current: ≤ 7.1A
LiPo cells: 2-3S
Poles: 4
Length: 65.8 mm
Diameter: 37 mm
Shaft diameter: 5 mm
Weight: 304 g
Waterproof: IP67 rated
Applications: 1/10 Short Course Truck, Truggy, Monster Truck
Please Note: For 7.4V or 8.4V BEC output, at least a 3S battery is required. Bluetooth range is approximately 5 meters due to design constraints.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
