Hobbywing Ezrun MAX10 G2S 80A Brushless Combo with 3652SD 4100kV G3 Motor combines the Ezrun MAX10 G2S 80A ESC and the matching Ezrun 3652SD G3 4100kV motor into a perfectly matched 1:10 scale brushless power system.
The MAX10 G2S is an advanced evolution of the MAX10 G2 ESC: same power specifications and housing, but now featuring an integrated Bluetooth module in the switch, allowing seamless adjustment without any additional devices. Connection to your smartphone is established via the HW-LINK app, enabling easy programming, data logging, and firmware updates. New enhancements compared to the G2 include internal data recording and a third BEC voltage setting of 8.4V for high-voltage servos.
This combo especially takes advantage of the ESC’s strengths: Turbo Timing can be exclusively activated with Hobbywing motors, increasing the maximum RPM by up to 25%. The motor overheating protection also functions only with supported Hobbywing motors. Both features come ready to use with the included Ezrun 3652SD G3 motor.
Features
- Integrated Bluetooth module for direct smartphone programming without extra devices.
- Internal data logging with graphical analysis of the last 10 minutes via HW-LINK app.
- Turbo Timing up to 20°, boosting max speed by approximately 25% with the supplied motor.
- Three-stage BEC: 6V / 7.4V / 8.4V switchable, delivering 5A continuous current.
- Frameless, temperature-controlled cooling fan with side air outlet.
- Dust and waterproof ESC and motor rated to IP67, including waterproof sensor cable.
- Overheat protection for capacitors and multiple safety functions including low voltage, temperature, and signal loss.
- 4-pole rotor motor designed for high torque, quick acceleration, and stable power delivery.
- CNC-machined aluminum housing and precision bearings for motor durability.
Specifications
ESC (Ezrun MAX10 G2S 80A)
Type: 1/10 brushless, sensored and sensorless
Current: 80A continuous / 520A peak
Input Voltage: 2-3S LiPo
BEC: adjustable 6V / 7.4V / 8.4V, 5A continuous (switch mode)
Motor limits: 2S LiPo ≤ 6000 KV, 3S LiPo ≤ 4200 KV (for 3652/3665 motors)
Turbo Timing: up to 20 degrees
Fan: powered via BEC, temperature-controlled
Programming: Bluetooth (HW-LINK app), LCD box, OTA module, separate 3-pin port
Waterproof: IP67 rated
Connectors: XT60 input, gold bullet motor output
Dimensions: 53 x 39.5 x 37.2 mm; Weight: 125 g (including cables and connectors)
Application: 1/10 On-Road, Buggy, Rally, and Short Course Truck
Motor (Ezrun 3652SD G3)
Type: Brushless, sensored
KV rating: 4100kV
Idle current: ≤ 5.0A
Compatible LiPo: 2-3S
Poles: 4
Dimensions: 53 mm length, 37 mm diameter
Shaft diameter: 3.175 mm
Weight: 228 g
Waterproof: IP67 rated
Application: 1/10 On-Road / Off-Road Light-Duty Short Course Truck
Please Note: Using the 7.4V or 8.4V BEC settings requires at least a 3S battery. The built-in Bluetooth range is approximately 5 meters.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
