HW30120203

Overview

The Hobbywing QUICRUN 1060 Brushed SBEC WP ESC is a purpose-built electronic speed controller designed specifically for new beginners and intermediate modellers who want reliable, hassle-free performance without unnecessary complexity. This 60-amp brushed ESC represents exceptional value for money and has become a favourite choice amongst UK RC enthusiasts building their first RC car or upgrading worn-out stock controllers. Whether you're running a vintage RC model, building your first brushed motor setup, or looking for a dependable upgrade for your 1/10th scale touring car, buggy, short-course truck, monster truck, or rock crawler, the QUICRUN 1060 delivers the kind of straightforward performance and durability that Hobbywing is renowned for across the RC hobby industry.

What sets this controller apart is its combination of intelligent engineering and beginner-friendly operation. The waterproof and dust-proof design means you can run your RC car in wet conditions, muddy terrain, and dusty environments without fear of damage from moisture or debris ingress. The QUICRUN 1060 features auto throttle calibration, making setup genuinely plug-and-play for newcomers to the hobby, whilst parameter configuration via jump caps allows intermediate builders to fine-tune performance exactly as they need it. Backed by reliable hardware combined with advanced software technology, this ESC provides both the high power output needed for demanding driving and comprehensive overload protection to keep your circuit safe during demanding use.

Recognised as the go-to option for brushed motor installations across the UK RC community, the QUICRUN 1060 has earned genuine customer loyalty through consistent performance, ease of use, and excellent value. The compact footprint and lightweight 39-gram design mean it fits easily into most 1/10th scale chassis without adding unnecessary bulk, whilst the straightforward wiring and standard connectors integrate seamlessly with most popular RC setups available in the UK market today.

Key Features

• Waterproof and Dust-Proof Design — The QUICRUN 1060 is fully sealed against moisture and dust ingress, allowing you to use your RC car in all weather conditions including rain, mud, and sandy terrain without any risk of water damage to the electronic components. This all-weather capability means you can enjoy RC driving year-round without worrying about environmental conditions destroying your ESC.
• 60-Amp Continuous / 360-Amp Peak Current — With a continuous current rating of 60 amps and peak burst capability of 360 amps, this controller delivers sufficient power for standard and torque-tuned brushed motors, providing responsive acceleration and sustained performance across a wide range of driving styles and terrain conditions.
• Auto Throttle Calibration — The ESC features automatic throttle calibration, eliminating the need for complicated setup procedures that confuse beginners. Simply power on and drive—the controller automatically learns your transmitter's throttle range, making it ideal for first-time RC users and reducing setup time dramatically.
• Jumper Cap Programming — Parameter adjustment via simple jump cap configuration allows experienced modellers to customise performance characteristics without requiring specialist programming equipment or software, offering flexibility for those who want to tweak their setup without complexity.
• Reliable Hardware and Advanced Software — Hobbywing's commitment to quality combines proven mechanical components with sophisticated firmware technology, delivering both the high power output needed for spirited driving and comprehensive overload protection that safeguards your ESC circuit during demanding use or accidental stalls.
• Compact and Lightweight Design — Measuring just 36.5 x 32.0 x 18.0 millimetres and weighing only 39 grams, the QUICRUN 1060 is small enough to fit in tight chassis spaces without creating weight distribution problems, making it suitable for a huge variety of 1/10th scale models.
• Switch Mode 6V/3A BEC Output — The built-in BEC (Battery Eliminator Circuit) provides regulated 6-volt power at up to 3 amps, sufficient to power your receiver and servo systems directly from your main battery without requiring a separate receiver battery pack, simplifying your electrical architecture.
• Standard Connectors — The controller uses a large-format TAMIYA connector for battery input and 4.0mm bullet connectors for motor output, both widely available and easy to solder, ensuring compatibility with the vast majority of RC cars, trucks and buggies available in the UK market.
• Forward and Reverse Operation — Full-range forward/reverse throttle control gives you complete directional capability for navigating complex terrain, recovering from mistakes, and precise manoeuvring in tight spaces, essential for both casual driving and more technical rock crawling.
• 2-3S LiPo or 5-9 Cell NiMH Battery Compatibility — The QUICRUN 1060 accepts a wide range of battery configurations, supporting either modern lithium polymer cells (2-3S) or traditional nickel-metal hydride packs (5-9 cells), giving you flexibility to use whatever battery chemistry suits your application and budget.

Technical Performance

The QUICRUN 1060 represents serious engineering excellence at an accessible price point. Built around proven brushed ESC architecture, this controller delivers a continuous current rating of 60 amps with a peak burst capability of 360 amps—sufficient headroom for standard 540/550-size brushed motors and torque-tuned variants. The controller accepts 2-3S lithium polymer batteries or 5-9 cell nickel-metal hydride packs, covering virtually every battery option available in the UK RC market. With a 2S LiPo configuration, the QUICRUN 1060 will reliably control 540 or 550 size motors rated 12T or higher, whilst on 3S LiPo it handles 18T and higher wound motors. The switch mode BEC output delivers regulated 6-volt power at up to 3 amps, eliminating the need for separate receiver battery packs and simplifying your overall electrical setup. The motor output uses industry-standard 4.0mm female bullet connectors, compatible with virtually all quality brushed motors available today, whilst the battery input features the large TAMIYA connector found on most RC car battery packs and chargers in the UK market. With dimensions of just 36.5mm length, 32.0mm width and 18.0mm height, the QUICRUN 1060 fits easily into compact chassis spaces without causing handling or weight distribution issues. The intelligent firmware provides overload protection that safeguards the ESC circuit during demanding driving, accidental stalls, or momentary extreme current draws, giving you genuine peace of mind during spirited use or learning-curve driving.

What's in the Box

• Hobbywing QUICRUN 1060 Brushed SBEC WP ESC
• Red 16AWG input wire (100mm)
• Black 16AWG input wire (100mm)
• Blue 16AWG output wire (100mm)
• Yellow 16AWG output wire (100mm)
• Instruction manual

What You Need to Complete

• 2-3S LiPo battery pack or 5-9 cell NiMH battery with large TAMIYA connector, or suitable connectors for soldering
• Brushed motor (540/550 size recommended, minimum 12T on 2S LiPo or 18T on 3S LiPo)
• Radio receiver and servo already installed in your RC car chassis
• Soldering iron and solder if connecting non-standard connectors (standard TAMIYA and bullet connectors are pre-fitted)

Frequently Asked Questions

• Is the Hobbywing QUICRUN 1060 suitable for RC beginners and first-time builders? — Absolutely. This ESC is specifically designed for new beginners and intermediate modellers. It features automatic throttle calibration that eliminates complicated setup procedures, and parameter configuration via simple jump caps rather than specialist software. Simply connect your battery, motor and receiver, and it's ready to drive. Many UK RC shops recommend this as the ideal first ESC upgrade for anyone running brushed motors.
• What battery does the QUICRUN 1060 need? — The ESC accepts 2-3S lithium polymer (LiPo) batteries or 5-9 cell nickel-metal hydride (NiMH) packs, all with standard TAMIYA connectors. On 2S LiPo (7.4 volts), it will run 540/550 size motors rated 12T or higher. On 3S LiPo (11.1 volts), it handles 18T and higher wound motors. Most UK RC shops stock both battery types in various capacities and prices.
• Is the QUICRUN 1060 waterproof and suitable for wet weather driving? — Yes, the ESC features full waterproof and dust-proof design, allowing use in rain, mud, and wet terrain without risk of water damage. This makes it ideal for UK weather conditions and off-road driving where mud splashes and water crossings are inevitable. The sealed construction protects all internal electronics from moisture and debris ingress.
• What size brushed motors work with this ESC? — The QUICRUN 1060 is rated for 540 and 550 size brushed motors. On 2S LiPo, use motors wound at 12T or higher. On 3S LiPo, use 18T or higher wound motors. Standard and torque-tuned variants are both supported. Avoid running under-wound motors (below 12T on 2S, below 18T on 3S) as this risks exceeding the recommended current draw.
• Does the QUICRUN 1060 require programming software? — No, this ESC does not support specialist programming software or devices. All parameters are configured via simple jump cap settings on the ESC itself, making it genuinely beginner-friendly. Auto throttle calibration handles the most critical setup automatically.
• What is the difference between this and the QUICRUN 1080 model? — The QUICRUN 1060 is rated for 60 amps continuous, making it ideal for standard and torque-tuned 540/550 motors and beginner-friendly setups. The QUICRUN 1080 handles higher current demands (80 amps) and is suited to more powerful motor configurations. For most UK RC cars, buggies and trucks running standard brushed motors, the 1060 provides more than adequate power.
• What connectors does this ESC use? — The QUICRUN 1060 accepts a large-format TAMIYA connector for battery input and uses 4.0mm female bullet connectors for motor output. Both are industry-standard connectors found on virtually all RC car batteries and quality brushed motors available in the UK, ensuring excellent compatibility with existing setups.
• Can I use this ESC in a Tamiya RC car or TT02 chassis? — Yes, absolutely. The QUICRUN 1060 is a perfect upgrade for Tamiya models, particularly for replacing the stock TBLE02S ESC supplied in standard kits. Many UK RC enthusiasts use it as their go-to replacement because it's more reliable, easier to setup, and doesn't suffer from thermal cutout issues when driving for extended periods.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the HOBBYWING QUICRUN 1060 BRUSHED SBEC WP ESC (60A) T-PLUG HW30120203 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.