Overview
Looking to upgrade your Traxxas BL-2 Slash 4x4, Rustler 4x4, Stampede 4x4, or Bigfoot 4x4 with camber links that actually improve performance and look incredible doing it? The RPM BL2 Camber Link Set is your new favourite upgrade for any serious RC car enthusiast in the UK. Whether you're a weekend basher pushing your brushless RC truck to its limits or a competitive racer fine-tuning your setup for maximum performance, this suspension upgrade delivers tangible improvements in handling, acceleration and tyre wear that you'll feel immediately on the track or trail.
This isn't just another bolt-on cosmetic upgrade. RPM's engineering team has redesigned the camber geometry from front to rear to fundamentally improve how your 4WD RC vehicle performs. Built from engineering-grade materials and backed by RPM's industry-leading breakage warranty, these camber links are seriously tough and designed to withstand the punishment of serious RC bashers and competitors alike. The matched, cohesive design means every link from front to rear works together as one integrated system, eliminating the mismatched geometry of the factory setup.
Made in the USA with precision injection moulding, the RPM BL2 Camber Link Set represents a significant step up from stock Traxxas parts. Available in four stunning colour options including this vibrant green finish, you can build an RC setup that looks as good as it performs. Whether you're running a ready-to-run Traxxas 4WD truck straight out of the box or have been tuning your vehicle for years, this upgrade will unlock performance gains you've been leaving on the table.
Key Features
- Engineered geometry upgrade for improved acceleration — Unlike generic camber links, the RPM set uses specifically calculated angles that reduce negative camber at the rear to square your tyres more evenly to the ground, resulting in noticeably better forward bite under acceleration and more predictable handling characteristics.
- Reduced tyre wear through optimised suspension angles — By dialling back excess negative camber at the front, these links improve traction and dramatically reduce the uneven wear patterns that plague stock setups, meaning your tyres last longer and perform more consistently throughout their life.
- Enhanced 4WD capability and traction — The improved front geometry makes better use of your truck's four-wheel drive system, putting more even grip across all four tyres and translating engine power more effectively to forward motion, whether you're accelerating on grass, dirt or tarmac.
- Lighter than stock for reduced unsprung weight — Manufactured from engineering-grade materials, these links are slightly lighter than the factory Traxxas equivalent, trimming unnecessary weight from the suspension while maintaining full strength and durability where it counts most.
- Industry-leading breakage warranty — RPM backs these camber links with their renowned warranty programme, giving you confidence that even if something does break, you're protected and supported by a manufacturer that stands behind their products.
- Matched, cohesive design from front to rear — Every piece in this set shares consistent styling and engineering, creating a visually unified suspension setup where everything finally looks right instead of the mismatched appearance of factory components mixed with upgrades.
- Complete four-link set for one full vehicle — This package includes all four camber links needed to upgrade your complete Traxxas 4WD truck, whether you're running a Slash, Rustler, Stampede or Bigfoot model, meaning no need to purchase multiple sets.
- Direct replacement for stock Traxxas parts — These camber links replace the factory Traxxas #6748 components, making installation straightforward on any compatible BL-2 4WD vehicle without requiring modifications or additional parts.
Technical Performance
The RPM BL2 Camber Link Set represents a substantial engineering upgrade over factory Traxxas suspension geometry. Each link is precision-moulded from engineering-grade materials selected for their balance of weight, strength and durability. The front links have been specifically tuned to reduce excess negative camber, which improves traction, reduces the uneven wear patterns that develop on stock setups, and maximises the effectiveness of your truck's four-wheel drive system by ensuring all four tyres maintain optimal contact with the ground. At the rear, RPM has made the strategic decision to reduce negative camber slightly, which squares the tyres more evenly to the ground. This geometry change delivers measurably better forward bite under acceleration and more even tyre wear across the tread surface, translating to both improved performance and longer tyre life. The weight savings compared to stock Traxxas parts are modest but meaningful in RC applications, where reducing unsprung weight improves suspension response, traction feel and overall handling precision. Whether you're running a brushless motor pushing high RPM or a more modest brushed setup, these links work with your existing drivetrain to improve how power transfers to the ground. The matched design means every component shares consistent engineering principles from front to rear, eliminating the compromise of mixing factory parts with aftermarket upgrades. Built and backed in the USA with RPM's legendary warranty support, this is a permanent upgrade to your RC truck that will outlast countless seasons of bashing, racing and trail driving.
What's in the Box
- Complete set of four RPM camber links for front and rear suspension
- Full vehicle upgrade kit for one Traxxas BL-2 4WD truck
Frequently Asked Questions
- Will these camber links improve my Traxxas 4WD truck's performance? — Yes, these links deliver measurable performance improvements. The optimised geometry reduces negative camber at the front to improve traction and reduce uneven tyre wear, while the rear geometry is tuned to square the tyres more evenly to the ground for better acceleration bite. You'll notice improved handling precision and forward acceleration immediately after installation.
- Are these camber links compatible with all Traxxas 4WD models? — These links are designed specifically for Traxxas BL-2 versions of the Slash 4x4, Rustler 4x4, Stampede 4x4, and Bigfoot 4x4. They replace the factory Traxxas #6748 camber links, so check your vehicle's specification to confirm BL-2 compatibility before ordering.
- How much difference will these make to tyre wear? — The improved suspension geometry significantly reduces uneven wear patterns by squaring the tyres more evenly to the ground and reducing excess negative camber angles. Most users report noticeably more even tyre wear and extended tyre life compared to stock setups, meaning you get more use from each set of tyres before replacement.
- Are these stronger than stock Traxxas camber links? — These RPM camber links are built from engineering-grade materials and backed by RPM's industry-leading breakage warranty, meaning they're engineered for durability and reliability. They're also slightly lighter than stock while maintaining full strength, offering a genuine upgrade in both performance and durability over factory parts.
- Do I need any special tools to install these camber links? — Installation is straightforward as these are direct replacements for the factory Traxxas #6748 camber links. Standard RC tools and basic mechanical knowledge are all you need. We'd recommend checking your truck's manual for specific installation guidance if you're new to suspension upgrades.
- Can I mix these with other suspension upgrades? — Yes, these camber links work as part of a complete suspension system. Many RC enthusiasts pair them with upgraded shocks, anti-roll bars and other suspension components. The matched design from RPM means they integrate well with your vehicle's geometry regardless of other upgrades you've made.
- What makes RPM camber links different from other options? — RPM invests in proper engineering rather than just moulding copies of factory parts. The geometry is specifically designed to improve acceleration bite and reduce tyre wear rather than simply matching stock angles. The matched front-to-rear design, weight savings and industry-leading warranty set these apart as a premium upgrade.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM BL2 CAMBER LINK SET FOR TRAXXAS 4WD VEHICLES - GREEN RPM72124 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Manufacturer: RPM R/C Products
- Model number: RPM72124
- Product type: Camber Link Set
- Colour: Green
- Application: Traxxas BL-2 4WD vehicles
- Compatible vehicles: Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, Bigfoot 4x4
- Replaces: Traxxas stock #6748 camber links
- Material: Engineering-grade moulded plastic
- Quantity in set: Four complete camber links (front and rear)
- Coverage: Full vehicle upgrade kit for one complete vehicle
- Weight: Lighter than stock Traxxas equivalent
- Front geometry: Reduced negative camber for improved traction and reduced uneven wear
- Rear geometry: Slightly reduced negative camber to square tyres more evenly to the ground
- Performance benefit: Improved forward acceleration bite and more even tyre wear
- Design: Matched, cohesive design from front to rear
- Warranty: Industry-leading RPM breakage warranty
- Manufacturing: Made in the USA
- Colour options available: Four colour options (including green, red and others)
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
