Overview
The Team Associated Ball Cups Moulded in Black (AS6274) are essential suspension components designed for the legendary RC10 Classic buggy and compatible Team Associated RC models. These moulded ball cups are precision-engineered replacement parts that maintain the structural integrity and handling characteristics of your RC car UK setup. Whether you're a seasoned racer maintaining your competition-grade buggy or a dedicated hobbyist keeping your vintage RC favourite in peak condition, these ball cups are crucial wear items that directly impact suspension geometry, steering response, and overall chassis performance.
Ball cups are the critical connection points between your suspension arms and the chassis pivot points, bearing the lateral and vertical loads during every run. Over time, standard ball cups wear, develop play, and can compromise handling precision. The Team Associated Ball Cups Moulded replacement set restores that tight, responsive feel you expect from a properly maintained RC buggy. Available in black, these components integrate seamlessly with modern RC10 variants and the RC10 Classic re-release, ensuring you can source genuine Team Associated parts with confidence from RC Model Shop, your trusted UK RC retailer.
These moulded ball cups represent genuine Team Associated engineering, part of the comprehensive spares and upgrade ecosystem that keeps the RC10 platform competitive and reliable. Whether you're refreshing your driveline, tightening handling with suspension pivots, or performing routine maintenance, these ball cups are the authentic choice for RC enthusiasts across the UK who demand reliability and precision in their RC hobby equipment.
Key Features
- Moulded Construction — These ball cups are precision moulded rather than machined, offering a balance of durability, consistency and cost-effectiveness while maintaining the tight tolerances required for responsive suspension geometry and predictable handling characteristics.
- Genuine Team Associated Part — As an official Team Associated component, these ball cups are engineered to exact specifications and materials, ensuring perfect fitment and compatibility with RC10 Classic models and associated Team Associated RC buggies without modification or adjustment.
- Black Finish — The black colour scheme matches modern RC10 variants and Factory Team specifications, providing a professional appearance whilst protecting the moulded material from UV degradation during outdoor racing and bashing sessions.
- Critical Wear Item Replacement — Ball cups experience constant stress during cornering, acceleration and deceleration, making them regular wear items that require periodic replacement to maintain tight suspension geometry and predictable handling characteristics.
- Suspension Geometry Control — Precise ball cup fitment directly influences caster angle, camber settings and suspension travel, making these components essential for anyone serious about handling tuning and competition-level performance in RC buggy racing.
- Wide Compatibility — Designed for the RC10 Classic re-release and compatible with earlier RC10 variants, these ball cups integrate into existing suspension systems without requiring additional modifications or hop-up parts.
Technical Performance
The Team Associated Ball Cups Moulded represent precision engineering in suspension component design. Moulded construction provides excellent consistency across multiple units whilst maintaining the tight tolerances essential for responsive handling in competitive RC buggy racing. The black finish not only provides a professional appearance matching modern RC10 aesthetics but also offers protection for the moulded polymer material during extended outdoor use. These ball cups function as the critical pivot points between your suspension arms and chassis mounting points, directly influencing caster angle geometry, suspension travel distribution, and overall steering response. Regular inspection and replacement of worn ball cups is essential maintenance for any serious RC10 owner, as worn cups introduce unwanted play in the suspension system that degrades handling precision and increases unpredictable behaviour during high-speed cornering and braking. For RC enthusiasts in the UK maintaining vintage RC10 models or competing with modern RC10 variants, genuine Team Associated ball cups ensure your suspension performs as designed without compromise. The moulded material provides the perfect balance of durability and performance characteristics, allowing full suspension travel whilst maintaining structural integrity through countless high-stress cornering events. Pair these ball cups with other suspension refreshes such as turnbuckles, ball joint sets, and replacement bearings to achieve complete suspension rejuvenation and restore your buggy to factory-specification handling.
What's in the Box
- Team Associated Ball Cups Moulded in Black — replacement suspension components ready for installation
Frequently Asked Questions
- What are ball cups and why do they need replacement in RC buggies? — Ball cups are the moulded or machined components that connect your suspension arms to the chassis pivot points. They experience constant lateral and vertical stress during cornering, acceleration and deceleration. Over time, the material compresses, develops play, and creates unwanted looseness in the suspension geometry. Replacing worn ball cups restores tight handling, precise steering response, and predictable suspension performance. For competitive RC10 racing or regular bashing, checking ball cup condition every 5-10 hours of running time and replacing them as needed is essential maintenance.
- Are these ball cups compatible with my RC10 Classic? — Yes, these Team Associated Ball Cups Moulded (AS6274) are specifically designed for the RC10 Classic re-release and are compatible with earlier RC10 variants. Always match the part number from your manual to confirm fitment, as different RC10 generations may use different ball cup specifications. If you're uncertain about compatibility with your specific RC10 model, contact the RC Model Shop team for fitment guidance.
- How often should I replace ball cups on my RC buggy? — Ball cup replacement frequency depends on your running style and maintenance habits. Aggressive bashing and competition racing typically require ball cup inspection every 5-10 hours of running time. Look for visible wear, material compression, or excessive play in the suspension arms. If you notice loose or sloppy handling that wasn't present before, worn ball cups are likely the culprit. As a preventative maintenance item, many serious RC racers replace ball cups every season or every 20-30 hours of competition use.
- What other suspension components should I consider replacing alongside these ball cups? — For comprehensive suspension refreshes, consider pairing these ball cups with Team Associated turnbuckles (available in multiple lengths from 33mm to 51mm), ball joint sets, replacement ball ends, and fresh suspension pivot components. Many RC enthusiasts also upgrade to blue titanium turnbuckles for improved durability and adjustability. Shock oil refreshes and bearing replacements are often performed during the same maintenance window, allowing you to restore your entire suspension system to peak performance.
- Are these genuine Team Associated parts? — Yes, absolutely. These are genuine Team Associated Ball Cups Moulded, part of the official Team Associated spares ecosystem. Purchasing from authorised retailers like RC Model Shop ensures you receive authentic components with proper quality control and compatibility guarantees. Genuine parts provide peace of mind for competitive racers and serious hobbyists who demand reliability in their RC equipment.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the TEAM ASSOCIATED BALL CUPS MOULDED, BLACK AS6274 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: Team Associated
- Model Number: AS6274
- Product Type: Ball Cups Moulded
- Colour: Black
- Construction: Moulded
- Compatibility: RC10 Classic, RC10 Classic re-release, Team Associated RC10 variants
- Function: Suspension arm to chassis pivot connection
- Status: Shadow Stock (limited availability)
- Price: £17.57 GBP
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
