Overview
The UDI RC INKFISH STEERING GEAR UDI023-20 is a high-torque waterproof servo component designed specifically for the UDI023 Inkfish JetBoat, a sophisticated 362mm remote control jet boat that combines cutting-edge engineering with exceptional water-based performance. This 9g integrated waterproof steering gear is engineered to deliver precise directional control in demanding aquatic environments, making it an essential component for anyone operating a brushless RC jet boat in the UK or beyond. Whether you're a dedicated RC enthusiast looking to repair or upgrade your existing Inkfish JetBoat, or building a ready to run RC model from spare parts, this steering gear represents genuine OEM quality from UDI RC TECHNOLOGY CO., LTD, the original manufacturer.
The Inkfish JetBoat itself is renowned in the RC hobby community for its innovative jet pump propulsion system, shallow V-shaped hull design, and ability to navigate freely in shallow and rocky water areas without fear of collision or entanglement with underwater obstacles. The steering gear is absolutely critical to this performance, as it controls the directional nozzle that guides the water jet, allowing precise steering inputs from your 2.4GHz radio control system. This waterproof servo has been specifically selected and integrated into the UDI023 design to withstand the rigorous conditions of water-based RC operation, including exposure to moisture, salt spray, and rapid temperature changes that would quickly damage standard terrestrial RC servos.
If you own an Inkfish JetBoat or are considering purchasing one, having a genuine replacement steering gear on hand is a smart investment in your RC equipment. This component is available as a standalone spare part through RC Model Shop, allowing you to maintain your jet boat in peak condition and minimise downtime due to servo failure or wear.
Key Features
- 9g Integrated Waterproof Design — This servo is specifically engineered with waterproof sealing to protect all internal electronics from water ingress, moisture damage, and corrosion. This is essential for RC jet boat operation where the servo is exposed to splash, spray, and humid aquatic environments that would rapidly destroy a standard terrestrial servo. The waterproof construction ensures reliable long-term performance in conditions that would normally cause servo failure within weeks.
- High Torque Output — The steering gear delivers sufficient torque to precisely control the directional water jet nozzle even under full throttle conditions, ensuring responsive and accurate steering inputs that translate directly to on-water performance. High torque is critical for jet boat steering as the servo must counteract the force of pressurised water flow through the directional nozzle while maintaining smooth, predictable handling characteristics.
- OEM Quality and Compatibility — This is the genuine original equipment manufacturer steering gear specified and supplied with the UDI023 Inkfish JetBoat models. It is engineered to integrate perfectly with the Inkfish hull design, mechanical linkages, and electronic control systems. Using genuine OEM components ensures that your jet boat performs exactly as the designers intended, with no fitment issues or performance compromises.
- Reliable Performance in Water-Based RC Operation — Unlike standard RC servos that require expensive waterproofing modifications and aftermarket sealing, this steering gear arrives factory waterproofed and tested for aquatic environments. This eliminates the guesswork and expense of trying to make terrestrial servos water-resistant, while guaranteeing reliable operation throughout the lifespan of your RC jet boat.
Technical Performance
The UDI023-20 steering gear is specifically engineered for the Inkfish JetBoat's jet pump propulsion system and shallow V-shaped hull design. At 9g weight with integrated waterproof construction, this servo balances responsiveness with durability in one compact package. The high-torque specification ensures that directional control inputs are crisp and immediate, which is essential for precision steering of a jet-driven RC boat operating at speeds up to 20 km/h. The Inkfish JetBoat utilises a 2.4GHz radio control system with a 4-channel receiver that features built-in gyroscope stabilisation, and this steering gear integrates seamlessly with that control architecture to deliver smooth, predictable directional response. The servo's waterproof rating makes it suitable for operation in shallow water, rocky areas, and various aquatic conditions where standard RC equipment would fail. Built to the same engineering standards as the rest of the Inkfish system, which includes a water-cooled brushless motor option, marine-grade ESC with innovative waterproof design, and balanced lithium battery power system, this steering gear is part of a comprehensively engineered RC jet boat platform that prioritises reliability and performance in demanding water-based environments.
What's in the Box
- UDI RC INKFISH Waterproof Steering Gear (UDI023-20)
Frequently Asked Questions
- Is the UDI023-20 steering gear compatible with other RC boats or just the Inkfish JetBoat? — This steering gear is specifically designed and engineered as an OEM component for the UDI023 Inkfish JetBoat. Whilst the servo specifications may theoretically fit other applications, it is optimised for the Inkfish's mechanical linkages, directional nozzle design, and control system integration. For best results and guaranteed compatibility, we recommend using this servo only as a replacement for the original Inkfish steering system.
- What is the difference between this steering gear and a standard RC servo? — Standard RC servos are designed for land-based vehicles and do not feature waterproof construction or sealing suitable for continuous water exposure. This UDI023-20 steering gear is purpose-built with waterproof integrated design to protect against moisture ingress, corrosion, and water damage. It is also calibrated to the specific torque requirements of the Inkfish jet pump steering system, making it far superior to aftermarket alternatives for this application.
- Do I need to apply any additional waterproofing or protective coatings to this steering gear? — No. This steering gear arrives fully waterproofed from the factory and requires no additional sealing, coating, or modification. Simply install it as a direct replacement for the original servo in your Inkfish JetBoat, and it is ready for immediate use in water. The integrated waterproof design eliminates the need for expensive aftermarket waterproofing treatments.
- How long will this steering gear last when used regularly on my RC jet boat? — With proper maintenance and care, the waterproof construction of this OEM steering gear provides extended lifespan compared to standard servos exposed to water damage. The integrated sealing protects internal electronics and mechanical components from corrosion and moisture-related wear. Regular freshwater rinses after saltwater use and proper storage will maximise longevity. As with all RC servo components, eventual wear is natural, but quality waterproof construction ensures reliable performance over many seasons of active use.
- What radio control system does this steering gear work with? — The UDI023-20 is integrated into the Inkfish JetBoat system, which features a 2.4GHz radio control system with a 4-channel receiver. The steering gear responds to standard proportional servo signals from this receiver, allowing smooth directional control across the full range of steering inputs. It is compatible with the UA37 wireless control system supplied with the Inkfish.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the UDI RC INKFISH STEERING GEAR UDI023-20 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Product Type: Waterproof Steering Gear Servo
- Model Number: UDI023-20
- Compatibility: UDI023 Inkfish JetBoat
- Servo Weight: 9g
- Torque Rating: High torque (specification not detailed in source)
- Waterproof Rating: Fully integrated waterproof design
- Radio System Compatibility: 2.4GHz UA37 wireless control system
- Receiver Compatibility: 4-channel receiver with built-in gyroscope
- Control Type: Standard proportional servo control
- Operating Voltage: 7.4V DC (compatible with boat's LiPo battery system)
- Application: Directional water jet nozzle control on jet-driven RC boat
- Hull Application: 362mm shallow V-shaped hull design Inkfish JetBoat
- Jet Pump Integration: Controls directional nozzle of spray pump propulsion system
- Operational Conditions: Suitable for shallow water, rocky areas, and aquatic environments
- Sealing: Integrated factory waterproof construction
- Installation: Direct replacement OEM component for UDI023 Inkfish JetBoat
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
