RPM Traxxas Slash 2WD Rear Skid Plate Black RPM81242

Overview

The RPM Traxxas Slash 2WD Rear Skid Plate in black (RPM81242) is an essential upgrade for anyone serious about protecting their RC car UK investment. Whether you're a weekend basher enjoying high-speed runs or a competitive racer pushing your Slash to its limits, this reinforced skid plate eliminates one of the most common failure points on the Traxxas Slash 2WD platform. When the stock rear skid plate fails, it can rip the rear shock tower mounting screws clean out of the chassis, resulting in catastrophic damage where the rear end of your truck heads in a completely different direction than the rest of the vehicle. With RPM's completely redesigned rear skid plate mounted, that frustration becomes a thing of the past.

RPM has engineered this skid plate from the ground up to be significantly stronger and more durable than the original equipment. The innovative design uses three chassis mounting points instead of the stock two-point system, triangulating the chassis mounts to spread impact energy over a much larger area. Best of all, this is achieved using an existing hole already located in the stock chassis, meaning no drilling or modification is required to install this upgrade. The solid flat skid design with large radius transition points allows your truck to slide smoothly over obstacles that would normally catch on the stock rear skid plate, effectively eliminating direct impacts to the lower rear end of the truck—which is the primary source of chassis breakage on the Slash.

For the serious RC enthusiast running a ready-to-run RC model or custom build, this is one of the most cost-effective protection upgrades you can make. At just £11.39, the RPM rear skid plate delivers professional-grade durability and engineering at an affordable price point. Installation is straightforward, and the improved design means you'll spend more time driving and less time repairing.

Key Features

• Three-point chassis triangulation — Instead of relying on just two mounting points like the stock skid plate, RPM's design uses three mounting points to distribute impact forces across a wider area of the chassis, dramatically increasing structural integrity and reducing the risk of catastrophic failure.
• No drilling required — The third mounting point utilises an existing hole already present on the stock Traxxas Slash chassis, meaning you can install this upgrade without any modification or additional drilling work.
• Solid flat skid design — RPM eliminated the problematic cross-tube styling of the original skid plate in favour of a completely solid flat design with large radius transition points, allowing your truck to slide smoothly over rocks, logs and rough terrain that would catch on the stock plate.
• Four thick skid rails front and rear — Each skid plate features four substantial skid rails that reduce friction while sliding, which actually improves durability by preventing the plate from catching and snagging on obstacles during high-speed runs.
• Rear cross-skid rail protection — A horizontal skid rail runs from side to side across the tail end of the rear skid plate, protecting the lower transmission screw and rear bumper mount whilst providing a smooth transitional surface for better obstacle clearance.
• Premium construction quality — RPM is a recognised manufacturer of durable plastic parts for RC cars across the UK and worldwide, with a reputation for parts that actually withstand the punishment of real-world bashing and racing.
• OEM compatibility — This rear skid plate is engineered specifically for the Traxxas Slash 2WD, ensuring perfect fitment and function without any modifications required to your existing chassis or drivetrain.
• Proven design reliability — The reinforced geometry and additional mounting point mean significantly fewer broken shock tower screws, fewer bent chassis rails, and fewer trips to the workshop for expensive repairs.

Technical Performance

The RPM Traxxas Slash 2WD Rear Skid Plate represents a significant engineering improvement over the original equipment. The core innovation lies in the three-point mounting system, which transforms how impact energy is distributed across the chassis during aggressive driving. Where the stock two-point system concentrates stress at two localised areas, RPM's triangulation spreads that force across a much larger surface area, reducing peak stress on individual components. The solid flat skid design is particularly effective because it allows the truck to maintain contact with the ground at a consistent angle, preventing the catching and snagging that causes sudden, violent impacts. The four thick skid rails serve a dual purpose: they reduce friction as the truck slides over obstacles, which paradoxically improves durability by preventing the plate from becoming caught or wedged. The rear cross-skid rail provides additional protection for vulnerable drivetrain components like the transmission screws whilst maintaining smooth ground transition. The use of existing chassis holes means zero modification to your Slash, preserving the structural integrity of the frame and ensuring this upgrade works flawlessly on any Traxxas Slash 2WD model. This is professional-grade protection engineering delivered at a consumer-friendly price point, making it an absolute must-have upgrade for anyone serious about keeping their RC car UK investment in running condition.

What's in the Box

• RPM Rear Skid Plate for Traxxas Slash 2WD in black
• Mounting hardware as required

Frequently Asked Questions

• Will this rear skid plate fit my Traxxas Slash 2WD? — Yes, this skid plate is engineered specifically for the Traxxas Slash 2WD and requires no modifications to your chassis. It uses an existing hole in the stock frame, making installation straightforward and reliable.
• What makes this better than the stock Traxxas skid plate? — RPM's design uses three mounting points instead of two, spreading impact energy over a much larger area of the chassis. The solid flat design with large radius transitions prevents catching on obstacles, and the four thick skid rails reduce friction while improving durability. The stock cross-tube design is prone to failure and can rip shock tower screws out of the chassis, whilst RPM's design prevents this catastrophic failure.
• Is this suitable for beginners? — Absolutely. Protecting your RC investment is important for everyone from complete beginners to experienced racers. This upgrade actually makes your Slash more reliable and durable, reducing repair costs and downtime. Installation is simple with no drilling required, making it ideal for anyone looking to make a meaningful performance upgrade.
• Will I need to remove my rear bumper to install this? — Installation details depend on your specific Slash configuration, but RPM designed this plate to work with the existing chassis structure. The rear cross-skid rail even provides additional protection for the rear bumper mount, suggesting compatibility with standard Slash setups.
• How much does this weigh? — RPM skid plates are manufactured from durable engineering polymer, keeping weight down whilst maintaining exceptional strength. The solid design is actually more weight-efficient than the hollow cross-tube stock design.
• Can I use this on a Traxxas Slash 4x4? — No, this rear skid plate is specifically designed for the 2WD Slash model. The Slash 4x4 has a different chassis geometry and requires different mounting points. Please ensure you select the correct version for your specific Slash model.
• How does the three-point mounting improve durability? — By using three mounting points instead of two, the design triangulates the chassis mounts, which is a fundamental engineering principle that distributes forces more evenly. This means no single mounting point bears the full impact load, preventing the catastrophic failure where shock tower screws are ripped out of the chassis frame.
• Is installation difficult? — No, installation is straightforward. The design uses an existing hole in the stock Traxxas chassis, so no drilling is required. You'll simply bolt the skid plate to the three mounting points using standard hardware.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM Traxxas Slash 2WD Rear Skid Plate - Black RPM81242 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.