RPM80772

Overview

The RPM Traxxas T/E-Maxx 3-Pcs Skid Plate in black is a premium chassis protection system designed specifically for the newer Traxxas T-Maxx #4908 and E-Maxx #3905 models, including brushless editions. If you're serious about protecting your RC monster truck investment, this skid plate set represents one of the best value upgrades available for RC car enthusiasts in the UK. RPM has engineered this three-piece system to provide comprehensive undercarriage protection whilst maintaining the performance characteristics your truck needs for high-speed bashing and challenging terrain.

Whether you're a weekend basher tackling rough ground or a dedicated RC enthusiast who demands durability, this skid plate set delivers outstanding protection against the major abrasion points that naturally occur during aggressive driving. RPM's design team carefully studied well-maintained T-Maxx and E-Maxx chassis to identify exactly where wear and damage occurs, then concentrated their engineering efforts on those critical areas. The result is a three-piece protection system that ties your chassis together whilst deflecting impacts and reducing friction along the undercarriage.

Made from bulletproof nylon material in the UK ready-to-run RC truck community's preferred black colour, this skid plate set offers competitive performance at intelligent prices without the expense of aluminium alternatives. The set is 100% guaranteed against breakage, meaning you can bash with confidence knowing your chassis is properly protected.

Key Features

• Three-Piece Design — The complete skid plate set includes all components needed to protect the entire undercarriage of your T-Maxx or E-Maxx, providing comprehensive coverage from front to rear across the full length of the chassis.
• Extended Centre Skid Plate — Unlike stock centre skid plates, RPM's moulded centre plate extends over the predominance of the chassis rails with better than 4mm of bulletproof RPM protection, ensuring the newer extended chassis rails of both models are fully covered.
• Reduced Friction Design — The moulded curves feature smooth, grooved surfaces that reduce sliding friction and act as a reduced-friction transition surface, preventing objects from hooking the stock rear skid plate during aggressive terrain negotiation.
• Recessed Screw Holes — Deep recessed screw holes help eliminate damage to the mounting screw heads during assembly and use, protecting your fasteners from unnecessary wear and ensuring reliable long-term assembly.
• Matched Groove Appearance — A unique, matched grooved finish runs from the front of the truck to the rear, creating a professional appearance whilst contributing to performance by maintaining consistent friction characteristics.
• Chassis Strengthening — The centre skid plate provides a more solid tie between the two chassis side rails for added support and rigidity, effectively reinforcing your chassis structure and improving overall durability during hard driving.
• Driveline Protection — Extended area protects the disc brake from damage, and because the centre skid plate runs the rearward length of the chassis side rails, less dirt and debris will be forced into the rear skid plate area, improving driveline durability and drive shaft bearing longevity.
• Smooth Radii Design — Smooth radii throughout the design deflect the most devastating of impacts, allowing your truck to handle rough terrain without catching or snagging on obstacles.
• Complete Hardware Package — Supplied with all necessary mounting screws (heat-treated, flathead hex screws) and full instructions for straightforward installation, so you can get your truck protected without hunting for additional fasteners.
• Made in the USA — Like all RPM moulded products, these skid plates are proudly manufactured in the United States to strict quality standards, ensuring consistent quality and durability in every set.
• 100% Guaranteed Against Breakage — RPM stands behind their products with a complete warranty against breakage, giving you peace of mind when bashing your RC monster truck across challenging terrain.
• Available Colour Options — Whilst this listing is for the black version, these skid plates are also available in blue and purple, allowing you to match your truck's colour scheme.
• Cost-Effective Protection — Priced at a fraction of the cost of aluminium skid plates, this three-piece set delivers outstanding value for money without compromising on protection, making it an intelligent choice for budget-conscious RC enthusiasts.

Technical Performance

The RPM Traxxas T/E-Maxx 3-Pcs Skid Plate represents a significant engineering achievement in chassis protection. Manufactured from RPM's signature bulletproof nylon material, these skid plates offer outstanding wear resistance that outperforms many aftermarket alternatives. The centre skid plate extends across the chassis rails with better than 4mm of continuous protection, a substantial thickness that provides genuine impact resistance without adding excessive weight to your truck. The three-piece construction system ties the chassis together, effectively creating a reinforced protective envelope around the most vulnerable areas of the undercarriage. The moulded grooves serve a dual purpose: they create a distinctive visual appearance whilst also reducing friction during high-speed runs, allowing your truck to glide smoothly over rough terrain rather than catching or snagging. The recessed screw holes accommodate heat-treated, flathead hex screws that are supplied in the package, ensuring that your fasteners remain protected and your assembly remains secure throughout extended driving sessions. The design accommodates the extended chassis rails of the newer T-Maxx #4908 and E-Maxx #3905 models, which required a completely new approach compared to earlier versions. Importantly, the centre skid plate features blind mounting holes that allow users to drill out the correct mounting locations for their specific vehicle (E-Maxx and T-Maxx use different mounting hole locations), making this a truly universal solution for both models. The smooth radii throughout the design actively deflect impacts rather than absorbing them, directing force away from vulnerable chassis components and ensuring that your truck handles the most challenging bashing sessions without damage. This is a complete chassis protection system engineered specifically for the demands of RC monster truck ownership in the UK market.

What's in the Box

• Three-piece skid plate set (front, centre, and rear components)
• Heat-treated flathead hex mounting screws (all necessary fasteners for assembly)
• Detailed assembly instructions

What You Need to Complete

• Stock plastic skid plates, bulkheads, and chassis braces (required for proper fit and function)
• 1/8 inch diameter drill (required to drill out correct mounting holes on the centre skid plate for your specific vehicle model)

Frequently Asked Questions

• Is this skid plate set compatible with my Traxxas T-Maxx or E-Maxx? — This RPM80772 skid plate set is designed specifically for the newer Traxxas T-Maxx #4908 and E-Maxx #3905 models, including brushless editions. If you have an older model T-Maxx, E-Maxx, or S-Maxx with chassis braces that do not have the word "MAXX" moulded into them, you will need a different version. Check your chassis braces carefully: if "MAXX" is present on the braces, this is the correct version for you.
• Why do I need to drill out mounting holes? — The E-Maxx and T-Maxx use different mounting hole locations for the centre mounting screws. RPM has left the mounting holes blind on the centre skid plate to prevent dirt build-up in the holes that aren't used on your specific vehicle. An 1/8 inch diameter drill is required to carefully drill out the correct mounting holes for whether you're installing this on a T-Maxx or an E-Maxx. This design approach ensures a cleaner installation with better protection against debris ingress.
• Will this work with aftermarket aluminium skid plates? — RPM skid plates will work with most aftermarket aluminium front and rear skid plates, but RPM guarantees the fit only when used with stock plastic parts. If you're planning to use aftermarket components, compatibility cannot be guaranteed, so it's recommended to stick with stock plastic skid plates, bulkheads, and chassis braces for assured fit and function.
• How much protection does the centre skid plate provide? — The moulded centre skid plate extends over the predominance of the chassis rails with better than 4mm of bulletproof RPM nylon protection, substantially thicker than stock centre skid plates. This extended coverage runs the rearward length of the chassis side rails, protecting the driveline, disc brake, and bearing areas from damage and debris ingestion.
• What makes RPM skid plates better than aluminium alternatives? — Whilst aluminium skid plates are durable, RPM's bulletproof nylon offers superior impact absorption with smooth radii that deflect devastating impacts rather than absorbing them. The design actively reduces friction through grooved surfaces, and these plates cost a fraction of aluminium alternatives whilst being 100% guaranteed against breakage. Additionally, RPM's skid plates tie your chassis together for added strength and rigidity.
• Is this suitable for aggressive bashing? — Absolutely. This skid plate set is engineered specifically for the demands of RC monster truck ownership and aggressive terrain driving. The design protects all major abrasion points identified through careful analysis of well-maintained trucks, and the 100% guarantee against breakage means you can bash with confidence.
• Are all mounting screws included? — Yes, this set is complete with all necessary heat-treated, flathead hex mounting screws. You won't need to source additional fasteners; simply ensure you have an 1/8 inch diameter drill available for the centre plate preparation.
• Will this add significant weight to my truck? — No. The bulletproof nylon material used in RPM skid plates is engineered for strength-to-weight ratio. The protection is substantial (better than 4mm in critical areas) without adding unnecessary weight that would impact your truck's performance or battery runtime.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM Traxxas T/E-Maxx 3-Pcs Skid Plate - Black RPM80772 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.