Overview
The RPM Gear Cover in striking green is an essential upgrade for owners of modern Traxxas electric 2WD models including the Rustler, Stampede 2WD, Bandit and Slash 2WD. If you're serious about protecting your investment in RC cars UK and want to keep those expensive gears safe from dirt, rocks and debris, this is the perfect solution. This premium moulded gear cover has been specifically engineered to fit all versions of these popular vehicles, solving the interference issues that plagued earlier designs when Traxxas introduced their XL-5 and VXL motors with longer motor shafts.
Whether you're a weekend basher, a competitive racer, or someone who enjoys pushing their RC vehicle to its limits, gear damage from ingested dirt and rocks is a real problem that can cost you hundreds of pounds in replacement parts. The RPM Gear Cover addresses this problem comprehensively, offering complete sealing of the gear mesh area and superior protection that stock Traxxas covers simply cannot match. The vibrant green colour matches Traxxas green far better than competitor alternatives and looks fantastic on your vehicle whilst providing unmatched durability and peace of mind.
This isn't just a protective cover—it's a practical investment that will pay for itself many times over by preventing a single catastrophic gear failure. Ready to run RC enthusiasts everywhere have recognised that genuine RPM gear covers are simply the best option available for protecting their drivetrains, and this upgraded version represents years of engineering refinement specifically for the latest generation of Traxxas electric 2WD models.
Key Features
- Expanded motor shaft area — RPM widened the gear cover opening over the motor shaft to accommodate the longer motor shafts found in XL-5 and VXL motors, ensuring a perfect fit on all recent Traxxas 2WD models without any binding or clearance issues.
- Narrowed perimeter clearance zones — Two strategic areas along the perimeter have been narrowed to provide adequate clearance for the rear bumper and wheelie bar mount, solving the interference problems that occurred with first-generation designs and ensuring this cover works on every version of these vehicles.
- Oversized access hole with soft plug — An ingeniously designed oversized access port with a removable soft plug allows you to easily reach and adjust the slipper clutch nut whilst still maintaining a completely sealed gear mesh area, keeping the plug firmly in place until you need it.
- Complete gear mesh sealing — Stock Traxxas gear covers leave a large, dangerously open gap between the spur gear and the out-drive that allows gear-destroying dirt, sand and small rocks to enter your gearbox. The RPM cover completely eliminates this gap, providing an unmatched seal that keeps your expensive gears safe from contamination.
- Enhanced pinion clearance — The cover design includes more clearance for larger pinions, making it ideal for owners who want to upgrade to higher-performance gearing for increased speed without running the risk of binding or rubbing.
- Sleek, modern contours — Designed with aesthetics in mind, the smooth, moulded shape looks professional and aggressive on your vehicle, complementing modern RC car styling rather than detracting from it.
- Easy bolt-on installation — The cover retains all stock geometry and geometry points, meaning you can install it with simple bolting—no cutting, gluing or modifications required to your vehicle's chassis or drivetrain components.
- Stock replacement compatibility — Engineered to replace the Traxxas stock gear cover #3792, making this an easy upgrade path for anyone already running a standard Rustler, Stampede, Bandit or Slash 2WD.
Technical Performance
The RPM Gear Cover represents serious engineering designed to solve real-world problems experienced by RC enthusiasts running Traxxas electric 2WD models. The cover's moulded construction delivers superior durability compared to thin-wall plastic stock alternatives, with careful material selection ensuring long-term UV resistance and impact durability even after months of hard use outdoors. The complete sealing design of the gear mesh area—eliminating the open gap found on standard covers—is the critical difference between gear boxes that last for years and those that fail prematurely from contamination. Every design feature serves a functional purpose: the expanded motor shaft cavity accommodates XL-5 and VXL motor dimensions without forcing fit; the narrowed perimeter zones provide the clearance needed for bumper and wheelie bar mounts; the soft-plug access hole offers practical serviceability without compromising the seal. Users report that the cover feels noticeably more robust than standard Traxxas covers, and the genuine green colour matches Traxxas OEM green much better than photographs suggest, making this an authentic factory-matching upgrade. The cover works with stock 87-tooth spur gears and provides excellent clearance for larger pinions up to reasonable sizes for anyone looking to upgrade their drivetrain components for increased performance. Material quality and engineering precision are evident throughout—this is a precision-moulded component, not a thin shell, delivering real protection for the expensive transmission components inside your RC car UK.
What's in the Box
- RPM Gear Cover in green
- Soft access plug for slipper clutch adjustment
Frequently Asked Questions
- Will the RPM Gear Cover fit my Traxxas Rustler, Stampede or Slash 2WD? — Yes. This upgraded cover has been specifically redesigned to fit all versions of the Traxxas Rustler, Stampede 2WD, Bandit and Slash 2WD, including recent models with XL-5 and VXL motors. The expanded motor shaft area and narrowed perimeter clearance zones solve the interference issues that plagued earlier designs, ensuring perfect fitment without cutting or modification.
- How does this compare to the stock Traxxas gear cover? — The stock Traxxas cover leaves a large, open gap between the spur gear and out-drive that allows dirt and rocks to enter your gearbox and destroy gears. The RPM cover completely seals this area, providing unmatched protection. Additionally, the RPM cover feels significantly more robust in construction and is engineered for superior durability. It features an oversized access hole for easy slipper clutch adjustment whilst maintaining the seal, something the stock cover cannot offer.
- Can I use this with larger pinion gears? — The cover provides more clearance for larger pinions than stock alternatives, making it suitable for upgraded high-performance gearing. However, it is not recommended for spur gears larger than the stock 87-tooth size.
- How easy is it to install? — Installation is simple bolt-on with no modifications required. The cover retains all stock geometry and mounting points, so you can fit it in minutes with standard tools. No cutting, gluing or fabrication work is necessary.
- What does the access plug do? — The soft plug allows you to easily access and adjust the slipper clutch nut without having to remove the entire gear cover. The plug stays securely in place until you need to remove it, maintaining the sealed protection of your gear mesh area.
- Will this work with my slipper clutch? — Yes. The oversized access hole with soft plug is specifically designed to provide easy access to the slipper clutch nut whilst maintaining an unmatched seal of the gear mesh area.
- Does this come with telemetry provision? — No. This cover does not include provisions for telemetry sensors.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM GEAR COVER GREEN TRAXXAS RUSTLER, STAMPEDE, BANDIT, SLASH RPM80524 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: RPM
- Model number: RPM80524
- EAN: 672415805244
- Product type: Gear cover
- Colour: Green
- Compatible vehicles: Traxxas Rustler, Traxxas Stampede 2WD, Traxxas Bandit, Traxxas Slash 2WD
- Motor compatibility: XL-5 and VXL motors
- Replaces: Traxxas stock gear cover #3792
- Features: Oversized access hole with soft plug for slipper clutch nut access
- Features: Completely sealed gear mesh area
- Features: Narrowed perimeter clearance zones for rear bumper and wheelie bar mount
- Features: Expanded motor shaft area
- Features: Enhanced clearance for larger pinions
- Features: Sleek contoured design
- Features: Easy bolt-on installation with no cutting or gluing required
- Features: Retains all stock geometry
- Spur gear compatibility: Stock 87-tooth spur gears recommended, not recommended for spur gears larger than stock 87 teeth
- Telemetry provision: No
- Warranty: Limited lifetime warranty against failure due to materials or workmanship issues
- Installation: No cutting or gluing required, simple bolt-on fitment
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
