RPM Rear Skid Plate for Traxxas Maxx Monster Truck Chassis Protection RPM72222

Overview

The RPM Rear Skid Plate for Traxxas Maxx is a premium aftermarket upgrade designed specifically for RC enthusiasts who demand durability and protection from their high-performance RC monster truck. If you own a Traxxas WideMaxx or Traxxas Maxx and want to protect your investment from costly damage, this is the upgrade you've been searching for. The RPM Rear Skid Plate solves several customer-reported issues that plague the stock Traxxas design, making it an essential modification for anyone serious about their RC car UK setup.

Whether you're a weekend basher taking your brushless RC monster truck across rough terrain or a dedicated RC hobbyist pushing your Traxxas Maxx to its limits, the RPM Rear Skid Plate provides peace of mind and extended longevity. Made in the USA and backed by RPM's limited lifetime warranty, this heavy-duty skid plate is engineered to withstand the punishment that aggressive off-road RC driving demands. The intelligent engineering behind this component demonstrates why RPM is recognised as one of the leading manufacturers of durable RC chassis upgrades in the UK RC hobby community.

Installation is straightforward, as the RPM Rear Skid Plate is designed to replace the stock Traxxas TRX8944 rear skid plate directly. No modifications or additional parts are required—simply swap out the old component for this superior alternative and immediately benefit from enhanced protection and durability. This is the kind of quality upgrade that transforms your RC car experience from good to exceptional.

Key Features

• Screw Hole Protection System — The primary engineering innovation in this skid plate addresses a fundamental weakness in the stock Traxxas design: exposed mounting screws that are vulnerable to damage during aggressive driving. By separating the skid ribs from the screw holes, RPM effectively shields these critical fasteners from harm. This protection is essential because damage to the mounting screws can cascade into damage of the bulkheads themselves, leading to costly and time-consuming repairs that will sideline your RC hobby.
• Three Full Skid Ribs for Superior Durability — Where the stock Traxxas rear skid plate includes only two skid ribs, the RPM upgrade features three full ribs. This extra rib provides significantly enhanced durability and abrasion resistance, ensuring your skid plate maintains its structural integrity even after extensive use on rocky, rough terrain. The additional rib transforms this from a basic protective component into a robust upgrade that handles the rigours of serious RC bashing.
• Functional Wear Surfaces — The skid ribs on the RPM Rear Skid Plate aren't just structural features; they provide genuine functional wear surfaces that distribute impact forces across a wider area. This intelligent design means the component resists damage more effectively and maintains better ground contact during aggressive manoeuvres, adding both wearability and longevity to your RC monster truck setup.
• Heavy-Duty Construction — RPM components are renowned for their robust engineering and this skid plate is no exception. Described as a 'beefy' component by both manufacturers and users alike, this is a part engineered for punishment and designed to protect your valuable RC investment through years of active use.
• Limited Lifetime Warranty — RPM stands behind their products with a limited lifetime warranty, reflecting the exceptional quality and durability you can expect from this skid plate. This warranty demonstrates manufacturer confidence in the product's longevity and gives you the assurance that you're investing in a component built to last.
• Direct OEM Replacement — Compatibility is seamless: the RPM Rear Skid Plate replaces the stock Traxxas TRX8944 rear skid plate directly, requiring no modifications to your Traxxas Maxx, WideMaxx Rock N Roll, WideMaxx Green, or WideMaxx Red variants. Installation is plug-and-play, making this an accessible upgrade even for RC enthusiasts with limited mechanical experience.
• Made in the USA — Manufactured in the United States, this skid plate reflects RPM's commitment to quality engineering and supporting domestic manufacturing. UK RC hobbyists can feel confident purchasing an American-made component engineered to the highest standards.

Technical Performance

The RPM Rear Skid Plate represents a masterclass in protective engineering for high-performance RC vehicles. The component's design addresses real-world damage patterns observed across thousands of Traxxas Maxx installations, demonstrating RPM's deep understanding of how these brushless RC monster trucks perform in the field. The three-rib configuration provides superior ground clearance management whilst maintaining protective coverage of critical fasteners and structural components. The intelligent separation of skid ribs from screw mounting holes means that even when the skid plate contacts rocks, jumps, or rough terrain at aggressive angles, the mounting screws remain protected from direct impact. This is crucial because mounting screws that become damaged can cause catastrophic damage to the bulkhead structures, requiring replacement of major chassis components that cost significantly more than this protective upgrade. The wear surfaces created by the skid ribs are engineered to sacrifice themselves gradually rather than allowing stress to transfer directly to the chassis frame, extending the service life of your entire RC monster truck. The additional rib compared to stock components provides approximately 33% more protective coverage, translating to measurably improved durability during the intense driving sessions that characterise serious RC car UK bashing. All of this engineering is delivered through a component that adds minimal weight whilst maximising protective benefit, ensuring your Traxxas Maxx maintains its aggressive handling characteristics whilst gaining fortress-like protection underneath.

What's in the Box

• One RPM Rear Skid Plate for Traxxas Maxx (replacement for Traxxas TRX8944)

Compatibility

• Traxxas WideMaxx Monster Truck Rock N Roll (TRX89086-4-RNR)
• Traxxas WideMaxx Monster Truck Green (TRX89086-4-GRN)
• Traxxas WideMaxx Monster Truck Red (TRX89086-4-RED)
• Any Traxxas Maxx model using stock Traxxas TRX8944 rear skid plate

Frequently Asked Questions

• Will this RPM Rear Skid Plate fit my Traxxas Maxx? — Yes, this skid plate is designed as a direct replacement for the stock Traxxas TRX8944 rear skid plate. It is compatible with all Traxxas Maxx variants including the WideMaxx Rock N Roll, WideMaxx Green, and WideMaxx Red models. Installation requires no modifications and uses your existing mounting points.
• What problem does the RPM Rear Skid Plate solve? — The stock Traxxas rear skid plate design leaves mounting screws exposed and vulnerable to damage. When these screws are damaged during aggressive driving, the damage can spread to your bulkheads, requiring expensive repairs. The RPM design uses a separate skid rib structure that shields these mounting screws from harm, protecting your chassis from this common failure point.
• How is this better than the stock Traxxas rear skid plate? — The RPM version includes three protective skid ribs compared to just two on the stock component, providing 33% more durability. Additionally, the innovative screw protection system physically shields mounting fasteners from impact, and the functional wear surfaces distribute stress more effectively across the component, extending the life of both the skid plate and your Maxx's chassis.
• Is this a worthwhile upgrade? — Absolutely. If you use your Traxxas Maxx for regular bashing on rough terrain, this upgrade is highly recommended. The cost of this single component is dramatically lower than repairing bulkheads or other structural damage caused by impact to exposed mounting screws. This is preventative maintenance that pays for itself the first time it prevents a major repair.
• How difficult is installation? — Installation is straightforward as this is a direct bolt-on replacement for the stock Traxxas TRX8944 component. You'll need basic tools and about 15 minutes to complete the swap. No modifications to your Maxx are required.
• Does RPM warranty this product? — Yes, the RPM Rear Skid Plate is backed by RPM's limited lifetime warranty, reflecting the company's confidence in the product's durability and quality manufacturing standards.
• What material is this skid plate made from? — RPM is renowned for manufacturing exceptionally durable plastic components engineered specifically for the stresses of RC vehicles. The material selection and manufacturing process ensure this skid plate can withstand repeated impacts whilst maintaining structural integrity.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM REAR SKID PLATE FOR TRAXXAS MAXX RPM72222 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.