Overview
The HOBAO HYPER GTB NITRO 2-SPEED SPUR GEAR 18T/22T HOP-0041 is an essential upgrade component for serious nitro RC enthusiasts running HOBAO's high-performance 1/8 on-road racing platforms. This precision-engineered pinion gear set is specifically designed for 2-speed transmission systems, offering competitive racers and experienced hobbyists the ability to fine-tune their RC car's acceleration and top-end performance characteristics. Whether you're competing in UK RC racing events or enjoying weekend bash sessions, having the correct gear ratio is absolutely critical to maximising your vehicle's potential on the track.
HOBAO has earned a sterling reputation in the RC car UK community for producing race-quality components that deliver consistent performance and durability under demanding conditions. The HYPER GTB series represents the pinnacle of 1/8 on-road nitro technology, and this 18T/22T pinion gear option provides the sweet spot between acceleration and top speed for many track layouts and driving conditions. Unlike generic aftermarket gears, HOBAO's genuine components are manufactured to exacting tolerances, ensuring smooth engagement with your spur gear and reliable operation through countless race runs and practice sessions.
This is a replacement component, making it ideal for upgrading worn gears, experimenting with different gear ratios for track tuning, or maintaining spares for your competitive RC racing setup. The dual-tooth configuration (18T and 22T options) allows drivers to switch between gears depending on track conditions, fuel type, and desired performance characteristics—a feature that serious racers know can be the difference between victory and the podium.
Key Features
- Dual-Tooth Pinion Configuration — This gear set includes both 18-tooth and 22-tooth options, allowing you to adapt your RC car's performance to different track conditions and racing scenarios without purchasing separate gears. Lower tooth counts favour acceleration and mid-range power, whilst higher counts extend top-end velocity.
- 2-Speed Transmission Compatibility — Engineered specifically for HOBAO's 2-speed transmission systems, these pinions integrate seamlessly with the automatic shifting mechanism that gives your RC car the ability to optimise gear selection on the fly during acceleration and deceleration phases.
- Precision Manufacturing — HOBAO's reputation for quality extends to every component, including these pinion gears. They are manufactured to tight tolerances that ensure smooth, quiet engagement with your spur gear and eliminate the chattering and backlash issues common with inferior aftermarket alternatives.
- OEM Genuine Part — This is an original equipment manufacturer (OEM) component direct from HOBAO, guaranteeing authenticity, correct fitment, and the performance characteristics you can trust in competition environments where reliability is paramount.
- Easy Installation — As a direct replacement pinion gear, installation is straightforward for anyone with basic RC car maintenance experience, making gear ratio adjustments quick and convenient between races or practice sessions.
- Race-Proven Design — Used by competitive nitro racing teams across the UK and internationally, this gear ratio has been tested and proven in high-stakes racing environments, giving you confidence in your component choice.
Technical Performance
The HOBAO HYPER GTB NITRO 2-SPEED SPUR GEAR 18T/22T represents a significant design consideration for anyone seeking to optimise their 1/8 scale nitro on-road racing car. The gear ratio you select dramatically influences your vehicle's performance profile: the 18-tooth option delivers superior acceleration off the line and through the low-to-mid-range RPM bands, making it ideal for tight, technical tracks with numerous corners and low-speed sections. Conversely, the 22-tooth pinion extends your top-end speed potential and improves efficiency at high RPM, benefiting drivers on faster, more flowing circuit layouts where maintaining velocity through faster corners is essential. These precision-engineered gears are manufactured from hardened steel or comparable materials selected to withstand the tremendous forces generated by high-performance nitro engines running at peak output. The engagement between the pinion and spur gear must be absolutely precise to avoid energy loss through slip and backlash, and HOBAO's manufacturing processes ensure this critical interface performs flawlessly. When paired with quality fuel, proper engine tuning, and a well-maintained 2-speed transmission system, these pinion gears will deliver the responsive, predictable performance that separates champion-level RC cars from casual hobby vehicles. The modular design allows you to experiment with different ratios during testing and development, a critical aspect of competitive RC racing where track conditions, fuel characteristics, and weather can all influence optimal gearing choices.
What's in the Box
- 1x 18-tooth pinion gear
- 1x 22-tooth pinion gear
Frequently Asked Questions
- What is the difference between 18-tooth and 22-tooth pinion gears for my nitro RC car? — The tooth count directly affects your vehicle's gear ratio and performance characteristics. The 18-tooth pinion provides a lower gear ratio that emphasises acceleration and responsive throttle response, making it suitable for technical tracks with tight corners. The 22-tooth option raises the gear ratio, sacrificing some initial acceleration but allowing your nitro engine to achieve higher top speeds on tracks with long straights and high-speed sections. Most competitive drivers carry both options and swap them based on track layout during practice sessions to find the optimal setup.
- Is this pinion gear compatible with my HOBAO HYPER on-road car? — The HOP-0041 is specifically designed for HOBAO HYPER GTB models equipped with 2-speed transmission systems. Always verify your vehicle's model designation and transmission type before purchasing. This component is not universally compatible with all HOBAO models, and using the wrong pinion can result in mechanical damage or poor performance.
- How often should I replace my pinion gears? — With regular maintenance and proper installation, a quality HOBAO pinion gear will endure hundreds of kilometres of running. However, signs of wear such as chipped teeth, visible scoring, or grinding noises during acceleration indicate replacement is needed. Competitive racers often proactively replace gears between major events to ensure absolute reliability.
- What tools do I need to change my pinion gear? — Installation requires basic RC tools including a pinion gear puller (or suitable alternative), the appropriate hex key for your motor retention hardware, and a small screwdriver for any clutch adjustments. The actual gear swap typically takes only a few minutes for someone with RC experience, making mid-event adjustments feasible if track conditions change.
- Can I use this gear with electric RC cars? — No, this is a nitro-specific component designed for petrol-fuelled engines. Electric RC cars operate entirely different transmission architectures and would require purpose-designed electric transmission pinions and spur gears.
- What's the best gear ratio for beginners? — Whilst this is a spare part rather than a complete RTR (ready to run) system, beginners starting with the HOBAO HYPER GTB should consult their vehicle's manual for the factory-recommended starting gear ratio. Generally, a mid-range ratio like the 20-tooth option offers balanced performance, and many newcomers find the 22-tooth setting more forgiving as it reduces the shock load on the engine during acceleration.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the HOBAO HYPER GTB NITRO 2-SPEED SPUR GEAR 18T/22T HOP-0041 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: HOBAO
- Model Number: HOP-0041
- Part Type: 2-Speed Pinion Gear Set
- Gear Teeth Configuration: 18T and 22T
- Tooth Count Option 1: 18 teeth
- Tooth Count Option 2: 22 teeth
- Compatibility: HOBAO HYPER GTB 1/8 Nitro On-Road models with 2-speed transmission
- Also Compatible With: HBGTL-C28G - HOBAO Hyper SS GTB RTR Nitro Street Racer
- Spare Part Category: Drivetrain Spares
- Power Type: Nitro
- Vehicle Scale: 1/8
- Vehicle Type: On-Road Racing Car
- EAN Code: 4711605966825
- Included Qty: 2 pinion gears (one 18T, one 22T)
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
