Overview
The FMS FCX10 11001 Rear Wheel Driveshaft 1 Pair is an essential spare part for owners of the FMS 1:10 scale Chevrolet K5 Blazer RC car. Whether you're a dedicated RC enthusiast running this classic crawler in the UK or someone who enjoys weekend bashing and trail driving, having quality replacement driveshafts on hand is crucial for keeping your RC vehicle in peak working condition. This OEM spare part is manufactured by FMS, a recognised brand in the RC hobby community, and is specifically engineered to match the exact specifications and performance requirements of the FCX10 11001 platform.
Driveshafts are among the most critical drivetrain components in any RC car. They transfer power from the gearbox and transmission to the wheels, and they endure constant stress and strain during driving. Whether you're tackling rocky terrain, navigating through muddy trails, or performing aggressive manoeuvres on pavement, your driveshafts are working hard to deliver reliable performance. The FMS FCX10 11001 Rear Wheel Driveshaft 1 Pair is purpose-built to withstand the demands of RC driving whilst maintaining the precise tolerances and alignment that your Blazer crawler requires for optimal handling and traction.
This is a ready-to-fit replacement part that requires no modification or adjustment before installation. Simply remove your worn or damaged driveshafts and install the new pair. For RC car UK enthusiasts, having spare driveshafts available means you can keep your crawler on the track or trail rather than waiting for repairs. Whether you've damaged a shaft during an aggressive bash session or you simply want to maintain a spare set for competitive driving or weekend adventures, this FMS genuine part is the ideal solution.
Key Features
- OEM FMS Part — This is an authentic original equipment manufacturer part from FMS, ensuring perfect compatibility with the FCX10 11001 platform and guaranteed fitment without any modifications required to your RC car.
- Rear Wheel Driveshaft Pair — You receive one pair of driveshafts, which means both rear wheel positions are covered in a single purchase, saving you money and ensuring matching components for balanced performance.
- 1:10 Scale Engineering — Specifically designed for 1:10 scale RC vehicles, these driveshafts are engineered with the correct proportions, strength and tolerances for this popular scale class, ensuring they will perform reliably under the typical forces and speeds that 1:10 scale crawlers experience.
- Chevrolet K5 Blazer Compatibility — These shafts are engineered to work perfectly with the FMS FCX10 11001 Chevrolet K5 Blazer RC crawler platform, featuring the exact spline patterns, joint angles and length measurements required for seamless integration.
- Direct Replacement — When your original driveshafts wear out, become damaged, or start to develop play or noise, these OEM parts provide an exact replacement that restores your crawler to like-new condition without the need for modifications, adjustments or additional components.
- Durability Under Load — Built to withstand the constant torque, acceleration, deceleration and impacts that come with RC crawler driving, these driveshafts are engineered to provide reliable service through demanding off-road conditions.
Technical Performance
The FMS FCX10 11001 Rear Wheel Driveshaft 1 Pair represents quality engineering designed specifically for the demands of 1:10 scale RC crawling. As a direct OEM replacement part, these driveshafts are manufactured to the exact specifications established by FMS for the FCX10 platform, ensuring that they will match the original components in terms of strength, weight distribution, spline configuration and overall performance characteristics. The rear wheel driveshafts in a crawler application are particularly important because they must transmit power efficiently from the transmission to the wheels whilst accommodating the vertical suspension travel that crawlers experience during rock-crawling and technical terrain driving. The engineering behind these shafts takes into account the low-speed, high-torque characteristics of crawler driving, where drivetrain components must be robust and reliable rather than optimised purely for high-speed performance. Whether you're driving through water crossings, scaling rock formations, or navigating through muddy trails, these driveshafts are built to maintain their integrity and performance. The spline design ensures a secure connection to the transmission output and wheel hubs, whilst the overall construction is optimised to balance strength with weight efficiency — critical factors in maintaining the precise handling and traction characteristics that make crawlers so much fun to drive.
What's in the Box
- FMS FCX10 11001 Rear Wheel Driveshaft Pair (2 driveshafts)
Frequently Asked Questions
- Will these rear wheel driveshafts fit my FMS FCX10 11001 Blazer crawler? — Yes, these are original equipment manufacturer parts specifically designed for the FMS FCX10 11001 platform. They feature the exact spline patterns, length and joint specifications required for perfect fitment and optimal performance. Simply remove your existing driveshafts and install these replacements — no modifications are necessary.
- How often will I need to replace my RC driveshafts? — This depends entirely on how intensively you use your crawler. Weekend bashers might go months or even years without needing replacement, whilst competitive drivers or those pushing their crawlers to the limit might need spares more frequently. It's always wise to keep a spare pair on hand so you can continue driving whilst the original shafts are being replaced or repaired.
- What causes driveshaft damage in RC crawlers? — Driveshafts can suffer damage from several sources: hard impacts when dropping off obstacles, extreme torque when climbing steep slopes with full throttle, cross-threading or cross-axial loads from aggressive turning whilst accelerating, or simply wear and tear over time as the splines and universal joints wear out. Having spare driveshafts means you're always ready to get back out on the trail.
- Are these parts genuine FMS components? — Yes, these are authentic OEM FMS parts sourced from the manufacturer. The part number FMS-C3237 is the official FMS designation for the FCX10 11001 rear wheel driveshaft pair, ensuring you're getting genuine components that meet FMS quality standards and will perform exactly as the engineers intended.
- Do I need any special tools to install replacement driveshafts? — Installation is straightforward and typically requires only basic RC tools like a hex key or Allen wrench to remove the fasteners holding your old driveshafts in place. Most RC enthusiasts can complete the replacement in just a few minutes. If you've never done this before, there are plenty of YouTube tutorials and online guides specific to the FCX10 platform that can walk you through the process step-by-step.
- Why should I buy replacement parts from RC Model Shop? — RC Model Shop is a trusted authorised retailer for FMS and all the brands we stock. By purchasing from us, you're guaranteed to receive genuine OEM parts that will work perfectly with your RC crawler, backed by our commitment to customer satisfaction and expert RC knowledge.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the FMS FCX10 11001 REAR WHEEL DRIVESHAFT 1PAIR FMS-C3237 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: FMS
- Model Number: FMS-C3237
- Product Type: Rear Wheel Driveshaft
- Scale: 1:10
- Vehicle Model: Chevrolet K5 Blazer (FCX10 11001)
- Quantity: 1 Pair (2 driveshafts)
- EAN: 784085232074
- Component Type: Drivetrain Spares
- Application: Rear wheels
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
