RPM Rear Bumper Wheelie Bar Mount Traxxas Slash Electric Stampede Rustler Bandit Blue RPM80905

Overview

The RPM Rear Bumper Or Wheelie Bar Mount is a premium upgrade solution designed for owners of Traxxas Slash, electric Stampede, electric Rustler and Bandit RC vehicles. This innovative mounting system transforms how your RC car handles rear-end impacts, whether you're bashing around the garden or tackling demanding terrain across the UK. RPM has engineered this mount to solve persistent problems found in the stock Traxxas wheelie bar mounting system, delivering superior durability and reliability that serious RC enthusiasts demand.

If you own a Traxxas 2WD stadium truck or short-course vehicle and want to protect your chassis, motor and drivetrain from impact damage, this is the accessory you need. The RPM rear bumper or wheelie bar mount works perfectly with aftermarket bumper systems, allowing you to add genuine scale looks whilst maintaining rock-solid protection. This versatile mounting solution is trusted by RC drivers across the UK who refuse to compromise on quality or performance during their bashing sessions.

Built from engineering-grade nylon and manufactured in the USA, this mount delivers the durability and reliability that RC Model Shop customers expect. Whether you're upgrading an existing vehicle or building a new setup, the RPM Rear Bumper Or Wheelie Bar Mount RPM80905 is the foundation of a properly protected rear end.

Key Features

• Dual Mounting Points on Gear Cover Side — Unlike the stock Traxxas mount which uses only a single screw, the RPM system features two mounting holes on the gear cover side to eliminate the dangerous hinge effect that causes the stock mount to fail under impact.
• Three Motor Side Mounting Points — The addition of three mounting holes on the motor side creates a total of five secure attachment points (compared to the stock mount's single connection), dispersing impact energy across a much wider area of the transmission case and reducing the risk of catastrophic damage during hard impacts.
• No More Slotted Parts Hanging — The traditional stock mount suffers from a fundamental design flaw where the slotted area holding the rear skid plate pops off after impact, leaving the bumper or wheelie bar mount dangling beneath the chassis. The RPM design eliminates this completely with a tucked-up mounting profile that sits neatly behind the skid plate.
• Improved Ground Clearance — Because the RPM mount tucks up compactly behind the skid plate, you benefit from better rear-end ground clearance compared to the stock configuration, allowing you to approach obstacles at steeper angles without catching the mount.
• Wide Vehicle Compatibility — This single mount works with all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit, including VXL, XL-5 and legacy model variations, making it an excellent choice if you run multiple vehicles or plan to upgrade existing machinery.
• Compatible with RPM Rear Bumpers — Works seamlessly with RPM's scale-detailed rear bumpers that feature integrated 5mm LED sockets for custom lighting, tubular design elements and stamped sheet metal styling for authentic appearance.
• Flexible Wheelie Bar Support — The mount can be used with the stock Traxxas Wheelie Bar (Traxxas #3678, sold separately) if you prefer a traditional wheelie bar setup instead of a bumper system.
• Complete Hardware Included — Every mount comes with all necessary fasteners and mounting hardware needed for installation, so you won't need to source additional parts from other RC retailers.
• Comprehensive Installation Instructions — Detailed step-by-step instructions guide you through the installation process, making this upgrade achievable even if you're new to RC car modifications.
• Industry-Leading Warranty — Backed by RPM's reputation for quality, this mount is factory-supported by their commitment to durability and performance.

Technical Performance

The RPM Rear Bumper Or Wheelie Bar Mount represents a significant engineering improvement over the stock Traxxas solution. The core problem it solves is impact energy distribution: where the original mount uses a single screw connection at the gear cover, creating a mechanical hinge that flexes under load, the RPM design employs a multi-point fastening strategy with two gear cover screws and three motor-side screws. This five-point connection system spreads impact forces across a much larger surface area of the transmission case, preventing the catastrophic failures common with single-point mounting. The construction uses RPM's proven engineering-grade nylon material, the same material that powers their entire range of durable RC components. The mount is designed to work with the Traxxas Slash 2WD, electric Stampede 2WD, electric Rustler 2WD and Bandit models across all current and legacy production versions including VXL and XL-5 electronics packages. The tucked-up design behind the rear skid plate means improved ground clearance for better obstacle approach angles, whilst the slotted area that traditionally pops off is eliminated entirely through superior structural design. Whether you're installing an aftermarket RPM Rear Bumper (RPM #80902 or #80905) for scale protection or fitting a stock wheelie bar, this mount adapts to your configuration. For serious bashers and RC enthusiasts across the UK who demand reliability during high-impact driving, this is the mounting solution trusted by the community.

What's in the Box

• RPM Rear Bumper Or Wheelie Bar Mount (Blue)
• All necessary mounting hardware and fasteners
• Complete installation instructions

What You Need to Complete

• Traxxas Slash 2WD, electric Stampede 2WD, electric Rustler 2WD or Bandit (the base vehicle)
• RPM Rear Bumper (RPM #80902 or #80905) OR Traxxas Wheelie Bar (Traxxas #3678) — the mount is designed to work with either option (sold separately)
• Standard RC tools for installation (screwdrivers, hex keys)

Frequently Asked Questions

• What is wrong with the stock Traxxas wheelie bar mount that the RPM version fixes? — The stock Traxxas mount uses only a single screw connection at the gear cover side, which creates a hinge effect under rear impacts. This causes the slotted area that holds the rear skid plate to pop off after collisions, leaving the mount or bumper hanging beneath the chassis. The RPM solution adds a second mounting hole on the gear cover side and three mounting points on the motor side, creating five total attachment points that eliminate the hinge effect and prevent the slotted area from popping off. The additional screws also help disperse impact energy over a much larger area of the transmission case, reducing the possibility of serious damage.
• Will this fit my Traxxas vehicle? — The RPM Rear Bumper Or Wheelie Bar Mount is designed to fit all versions of the Traxxas Slash 2WD, electric Stampede 2WD, electric Rustler 2WD and Bandit, including VXL, XL-5 and legacy model versions. If you own one of these vehicles, this mount is compatible regardless of when your model was manufactured.
• Can I use this mount with a wheelie bar or must I use a bumper? — The mount is designed to work with either configuration. You can install the stock Traxxas Wheelie Bar (Traxxas #3678) if you prefer that setup, or you can use an RPM Rear Bumper (RPM #80902 or #80905) for additional scale detail and protection. The choice is yours based on your preferred style and protection needs.
• What bumper systems work with this mount? — This mount is compatible with Traxxas rear bumper mounts as well as RPM Rear Bumper Mounts (RPM #80902 and #80905). If you're using an RPM rear bumper, the RPM bumper mounts integrate directly with this wheelie bar mount for complete rear-end protection and scale appearance.
• Is installation difficult for someone new to RC car upgrades? — No. The mount comes with comprehensive installation instructions and all necessary hardware. The installation process is straightforward and achievable for anyone with basic RC car maintenance experience. You'll need standard RC tools like screwdrivers and hex keys.
• How much protection does this provide compared to the stock mount? — The multi-point fastening system (five mounting points versus the stock mount's single point) spreads impact energy across a significantly larger surface area of the transmission case. This reduces the possibility of damage during high-impact bashing sessions. Combined with an RPM Rear Bumper, the protection for your motor and chassis becomes what RPM describes as nearly indestructible.
• Is the blue colour standard or are other colours available? — The RPM80905 model comes in blue. RPM also manufactures an equivalent mount in black (RPM #80902) if you prefer to match a different colour scheme on your vehicle.
• What is the warranty coverage on this mount? — The RPM Rear Bumper Or Wheelie Bar Mount is backed by RPM's limited lifetime warranty against breakage, reflecting the company's confidence in the durability of their engineering-grade nylon construction.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM Rear Bumper Or Wheelie Bar Mount - Slash/Stam/Rust Blue RPM80905 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.