RPM Front and Rear Skid Plates for Traxxas Mini Maxx Mini XRT RPM72252

Overview

The RPM Front & Rear Skid Plates for Traxxas Mini Maxx and Mini XRT (RPM72252) are premium chassis protection components designed to address a critical weakness in the stock Traxxas design. Whether you're a dedicated RC enthusiast running your Mini Maxx or Mini XRT at the track or bashing it in the backyard, these skid plates represent a smart upgrade that will significantly reduce maintenance headaches and extend the lifespan of your RC car. If you've owned a Traxxas Mini Maxx or Mini XRT, you've likely experienced the frustration of exposed mounting screws that can become damaged during aggressive driving, making them nearly impossible to remove and risking damage to the chassis bulkheads.

These RPM skid plates solve that problem with an intelligent redesign that separates the functional skid ribs from the screw holes, keeping your fasteners safe whilst protecting the critical bulkhead areas underneath. For UK RC car enthusiasts seeking reliable upgrade parts that deliver genuine performance benefits, this is exactly the kind of product that transforms your ownership experience. RPM's reputation for quality chassis components is well-deserved, and these skid plates exemplify the engineering excellence that has made them a trusted name in the ready to run RC car community.

Made proudly in the USA and backed by RPM's limited lifetime warranty, these skid plates are built for durability and longevity. Less downtime means more run time—exactly what every RC basher and racer wants from their upgrade components.

Key Features

• Direct Stock Replacement — These skid plates replace the original Traxxas #10737 components, meaning installation is straightforward with no modifications or additional parts required. If you've been thinking about upgrading your Mini Maxx or Mini XRT, you can do so with complete confidence that fitment is perfect.
• Protective Screw Coverage — The redesigned mounting screw area isolates fasteners from direct impact and abrasion, preventing damage that typically makes stripped screws impossible to remove. This protection alone will save you countless frustrating hours attempting to extract damaged fasteners from your bulkheads.
• Bulkhead Preservation — By keeping mounting screws safe from damage, these skid plates prevent the stripping of bulkhead threads and holes, eliminating the time-consuming repairs that would otherwise be necessary. Your chassis stays stronger for longer.
• Three-Rib Reinforced Design — RPM upgraded from the stock two-rib design to a three-rib configuration, which increases durability, abrasion resistance, and overall structural strength. The extra rib isn't cosmetic—it's a functional engineering enhancement that makes a measurable difference in real-world use.
• Functional Wear Surfaces — The added skid ribs act as sacrificial wear surfaces that protect the rest of your chassis from ground contact and repeated impacts. As you bash or race, these ribs absorb the punishment rather than your expensive bulkheads and electronics.
• Extended Component Lifespan — The combination of protective design and reinforced geometry means your skid plates will outlast the stock components and continue protecting your chassis through season after season of use.
• Made in the USA — RPM manufactures these skid plates domestically, ensuring quality control and supporting American engineering. The brand's reputation for toughness backs every component produced.
• Limited Lifetime Warranty — RPM stands behind their products with comprehensive warranty coverage, giving you peace of mind that these are genuine, quality components built to last.

Technical Performance

The RPM Front & Rear Skid Plates represent a significant engineering upgrade over the stock Traxxas design. The three-rib configuration provides substantially better impact absorption and ground clearance protection compared to the original two-rib layout. The separation of screw holes from the primary skid surfaces means fasteners are recessed and protected from the direct contact that causes damage during normal RC car operation. This intelligent design approach uses material thickness and strategic ribbing to distribute impact forces across a larger area, reducing stress concentration at the mounting points. The skid plates are manufactured using durable thermoplastic materials that resist cracking and maintain their protective properties even after repeated impacts, temperature cycling, and exposure to typical RC car usage. The engineering ensures that as the skid surfaces wear from ground contact, the structural integrity of the screw protection area remains intact, meaning you get consistent protection throughout the product's lifespan. For users running their Mini Maxx or Mini XRT in tough conditions—whether on rocky terrain, concrete surfaces, or high-impact bash environments—these upgraded skid plates transform the durability profile of the chassis.

What's in the Box

• RPM Front Skid Plate
• RPM Rear Skid Plate

Frequently Asked Questions

• Will these RPM skid plates fit my Traxxas Mini Maxx or Mini XRT directly? — Yes, absolutely. These RPM skid plates are direct replacements for the original Traxxas #10737 components, which means they bolt straight onto your Mini Maxx or Mini XRT without any modifications, drilling, or additional parts. Installation takes just minutes, and you immediately gain the protection benefits.
• Why would I upgrade from the stock Traxxas skid plates? — The stock design has a critical weakness: the mounting screws are exposed to direct impact and abrasion from the ground. When these screws get damaged, they become nearly impossible to remove, and you risk stripping the bulkhead threads underneath, leading to expensive repairs. The RPM design separates the skid ribs from the screw holes, protecting fasteners and bulkheads simultaneously. Additionally, RPM added a third reinforcing rib, increasing overall durability and giving you significantly more protection.
• How much more durable are these compared to stock components? — The three-rib design versus the stock two-rib configuration provides noticeably better impact absorption and ground clearance. The reinforced geometry means the skid plates themselves last longer before needing replacement, and more importantly, they protect your more expensive chassis components from damage that would otherwise require costly repairs or replacement.
• Are these skid plates suitable for all Mini Maxx and Mini XRT variants? — These RPM skid plates are compatible with the Traxxas Mini Maxx BL-2S (available in black, orange, green, and blue) and the Traxxas Mini XRT VXL-3S (available in red, blue, green, and orange). If you own either of these models, these skid plates will work perfectly.
• What is the installation process? — Installation is straightforward. Simply remove your stock Traxxas #10737 skid plates by unbolting them from the chassis, then bolt on the new RPM skid plates using the same mounting points. No drilling, modification, or special tools are required. Most users complete installation in under five minutes.
• How do I know these will actually prevent screw damage? — The RPM design physically recesses the mounting screws below the primary contact surface of the skid plate. This means when your RC car impacts rocks, curbs, or jumps, the outer ribs make contact first, and the screw holes remain protected. The design has proven effective across thousands of customer installations.
• Are these suitable for both racing and bashing? — Absolutely. Whether you're running aggressive track sessions or weekend bashing in rough terrain, these skid plates provide valuable protection. The reinforced design handles both uses equally well, making them a worthwhile upgrade for any Mini Maxx or Mini XRT owner.
• What is the warranty coverage? — RPM backs these skid plates with their limited lifetime warranty, demonstrating confidence in the product's durability and quality. This warranty provides assurance that you're investing in genuine, well-engineered components.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM FRONT & REAR SKID PLATES FOR TRAXXAS MINI MAXX/MINI XRT RPM72252 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.