Overview
The FTX Washer Shim 13 x 16 x 0.2mm (10pc) is an essential spare part and hop-up component designed for FTX RC models and compatible RC vehicles across the UK. Whether you're a dedicated RC enthusiast running FTX crawler models, buggies, or rock crawlers, or you're looking for quality replacement parts to maintain your ready to run RC car in peak condition, this pack of precision-engineered washers delivers exceptional value and reliability. These shim washers are fundamental components in RC vehicle assembly and maintenance, used to fine-tune suspension geometry, adjust bearing clearances, and optimise drivetrain performance across countless FTX models including the popular Outback, Ranger, Kanyon, and Siege series.
Washer shims are critical micro-adjustment components that sit between moving parts in your RC vehicle's chassis, suspension, and drivetrain. They allow you to precisely control tolerances, reduce play in bearings, adjust suspension ride height, and optimise alignment without having to replace entire components. For anyone serious about maintaining their RC car or buggy in peak operating condition, having a selection of quality shims in various sizes is absolutely essential. The FTX Washer Shim pack offers outstanding value by providing ten individual shims in a single convenient pack, ensuring you always have spares on hand when tuning or repairing your RC models.
RC Model Shop stocks genuine FTX spare parts and hop-ups for all major FTX models available in the UK market. These precision components are manufactured to OEM specifications and are fully compatible with the entire range of FTX electric RC kits and ready to run models. Whether you're building a new FTX rock crawler, maintaining an established collection, or upgrading your RC car's performance, these washer shims deliver the precision and durability you need.
Key Features
- Precise Dimensions — At 13mm inner diameter by 16mm outer diameter with a thickness of 0.2mm, these shims are engineered to exacting tolerances, allowing you to make fine adjustments to suspension geometry, bearing clearances, and drivetrain alignment with absolute precision and confidence.
- Pack of Ten — This set includes ten individual washer shims, providing excellent value and ensuring you have multiple spares available for different assembly points across your RC models or for use across multiple vehicles in your collection.
- Genuine FTX Component — These are authentic FTX-branded spare parts manufactured to original equipment specifications, guaranteeing perfect fit and compatibility with all FTX RC models and compatible RC vehicles throughout the UK.
- Multi-Purpose Application — Washer shims are used throughout RC vehicle construction for suspension tuning, bearing preload adjustment, drivetrain optimisation, and chassis alignment, making this pack essential for any serious RC enthusiast's spares box.
- Durable Construction — Manufactured from quality materials to withstand repeated use, installation, and removal during vehicle tuning and maintenance sessions without deformation or degradation.
- Affordable Spares Solution — At just £1.99 per pack, these genuine FTX washer shims offer outstanding value compared to purchasing replacement components individually or through other retailers.
Technical Performance
The FTX Washer Shim 13 x 16 x 0.2mm represents precision engineering at its finest within the RC spare parts category. These shims are manufactured from durable material capable of withstanding the continuous forces and vibrations generated during off-road driving, rock crawling, and high-performance RC car operation. The specific dimensions of 13mm inner diameter and 16mm outer diameter, combined with the precise 0.2mm thickness, make these shims ideal for fine-tuning bearing clearances, adjusting suspension preload, and optimising drivetrain geometry across multiple FTX platforms. The ability to adjust tolerances in increments of just 0.2mm demonstrates the precision engineering philosophy behind FTX's component design. Users can stack multiple shims to achieve greater adjustments, providing flexible tuning capability for different track conditions, driving styles, and suspension setups. Whether you're running an FTX rock crawler on technical terrain, a high-speed buggy on loose surfaces, or any other FTX model in between, having quality washer shims available ensures your vehicle maintains optimal performance and longevity. The pack of ten provides sufficient quantity for multiple application points or for keeping spares when replacing worn shims during routine maintenance and seasonal model servicing.
What's in the Box
- FTX Washer Shim 13 x 16 x 0.2mm — 10 pieces
Frequently Asked Questions
- What is a washer shim and why do I need one for my RC vehicle? — A washer shim is a thin, flat disc that sits between components in your RC car's assembly. These shims allow you to make precise micro-adjustments to bearing preload, suspension geometry, and drivetrain alignment. They're essential for fine-tuning your RC model's handling characteristics, reducing play in the chassis, and optimising performance. Every serious RC enthusiast building or maintaining a rock crawler, buggy, or competition RC car should have shims in their spares box.
- Are these shims compatible with all FTX RC models? — These FTX-branded washer shims are designed specifically for use with FTX RC models and are compatible with the full range of FTX electric RC kits available in the UK, including the Outback series, Ranger, Kanyon, Siege, and many others. Always check your specific model's assembly instructions or parts diagram to confirm the exact shim sizes required for your particular vehicle.
- How many shims do I need for my RC car? — The number of shims required depends on your specific vehicle model and desired setup. Most RC cars require shims at multiple points including suspension pivot points, drivetrain assemblies, and bearing locations. This pack of ten provides excellent coverage, and you can purchase additional packs as needed for larger projects or when maintaining multiple vehicles.
- Can I stack multiple shims together to make thicker adjustments? — Yes, absolutely. One of the key advantages of shims is that you can combine multiple units to achieve greater thickness and larger adjustments. If you need to adjust clearance by 0.4mm, for example, you can stack two 0.2mm shims together, providing flexible tuning capability without needing to purchase different shim sizes.
- Is this suitable for beginners? — Washer shims are advanced tuning components designed for users with experience in RC vehicle assembly and maintenance. If you're new to RC car building or modification, consider starting with ready to run RTR models from FTX and consulting the assembly instructions or seeking guidance from experienced RC enthusiasts before attempting advanced chassis tuning using shims.
- How do I install these washer shims on my RC vehicle? — Installation varies depending on the specific application point on your vehicle. Always consult your FTX model's assembly instructions or parts diagram for the correct installation location and method. Generally, shims are placed between moving parts or bearing locations to adjust clearances and preload. Ensure components are clean before installation and reassemble securely.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the FTX WASHER SHIM 13 X 16 X 0.2MM (10PC) FTX-W006 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: FTX
- Model Number: FTX-W006
- Product Type: Washer Shim
- Inner Diameter: 13mm
- Outer Diameter: 16mm
- Thickness: 0.2mm
- Quantity per Pack: 10 pieces
- EAN: 5056135781395
- Application: FTX RC Models - Suspension, drivetrain, and bearing adjustment
- Compatible Models: FTX Banzai, FTX Bugsta, FTX Carnage, FTX Colt, FTX Comet, FTX DR8, FTX Edge, FTX EVO30, FTX Hi-Rock, FTX Kanyon, FTX Mauler, FTX Mighty Thunder, FTX Mini Outback, FTX Outback, FTX Outback 2.0, FTX Outback 3.0, FTX Outback Fury, FTX Outlaw, FTX Ravine, FTX Siege, FTX Stinger, FTX Tracer, FTX Vantage and other FTX models
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
