C-53112-1

Overview

The Team Corally Ultra High Speed Cooling Fan TF-40 is a premium cooling solution designed specifically for high-performance RC brushless motors. Whether you're running a competitive 1/8 buggy, truggy, or monster truck, this 40mm cooling fan delivers exceptional thermal management to keep your motor running at peak efficiency during extended racing sessions. Built with an aluminium housing for superior heat dissipation, this fan represents the professional-grade cooling that serious RC enthusiasts demand from their setups.

If you're piloting a brushless RC car, buggy, truggy, or monster truck in the UK and pushing your motor to its limits, overheating is a real concern that can compromise performance and reduce component lifespan. The Corally Ultra High Speed Cooling Fan addresses this challenge head-on with its high-speed 16,000RPM operation and intelligent thermal design. This is the cooling solution trusted by RC competitors and weekend bashers alike who refuse to let heat throttle their performance.

The fan is engineered with reverse polarity protection built-in, ensuring your investment is safe even if you accidentally connect the wiring incorrectly. With its 2-pin JST/Receiver plug connection, installation into most modern RC brushless setups is straightforward and compatible with standard receiver battery lines or ESC outputs. The compact 40 x 40 x 10.6mm form factor means you can mount this effectively in tight engine bays without compromising your vehicle's balance or aerodynamics.

Key Features

• T6 Aluminium Heat Sink Designed Case — The fan housing is precision-engineered from T6-grade aluminium, which is specifically selected for its exceptional thermal conductivity and structural rigidity, allowing the fan to dissipate motor heat far more effectively than plastic alternatives and maintain its structural integrity under continuous high-speed operation.
• Ultra High Speed 16,000RPM Operation — Running at an impressive 16,000 revolutions per minute, this cooling fan generates powerful airflow that rapidly removes heat from your brushless motor, preventing thermal throttling and maintaining consistent performance throughout your entire race or bashing session.
• Reverse Polarity Protected — Built-in reverse polarity protection safeguards the fan motor from damage if you accidentally connect the positive and negative wires backwards, which is a common mistake that could otherwise destroy the fan or damage your RC electrical system.
• Compact 40mm Form Factor — The 40 x 40 x 10.6mm size is purpose-designed to fit in the tight engine bays typical of 1/8-scale RC buggies, truggies, and monster trucks, allowing you to achieve optimal cooling without requiring major chassis modifications or weight redistribution.
• 2-Pin JST/Receiver Plug Connection — The standard JST connector with receiver plug compatibility means this fan integrates seamlessly into virtually any modern RC brushless system, connecting directly to your receiver battery lead or ESC output without requiring additional adapters or custom wiring.
• 180mm Extended Wire Length — The generous 180mm wire lead provides flexibility in fan placement and routing around your vehicle's frame, allowing you to position the cooling intake for optimal airflow regardless of your specific chassis layout or motor placement configuration.
• Maximum Voltage Compatibility 8.75V (2S LiPo) — Rated for operation up to 8.75V, this fan is perfectly matched to 2-cell LiPo batteries (7.4V nominal), the standard power source for high-performance 1/8-scale RC vehicles, ensuring reliable performance throughout your battery's discharge cycle.
• Efficient 0.65A Current Draw at 7.4V — With a modest current consumption of just 0.65 amps at standard 2S LiPo voltage, this fan has minimal impact on your overall power budget, leaving maximum amperage available for your brushless motor and ensuring your ESC and battery can comfortably handle the cooling load.
• Featherweight 21g Construction — Weighing just 21 grams, this cooling fan adds virtually no weight to your RC vehicle, preserving your carefully balanced weight distribution and keeping your vehicle's performance characteristics exactly where you've tuned them.
• Black and Red Styling — The distinctive black and red colour scheme complements modern RC vehicle aesthetics and matches the branding of Team Corally's other premium components, allowing you to build a cohesive, professional-looking setup.

Technical Performance

The Team Corally Ultra High Speed Cooling Fan represents a benchmark in thermal management for 1/8-scale RC applications. The T6 aluminium construction isn't merely aesthetic—it's a critical engineering choice that directly impacts heat dissipation efficiency. T6 aluminium offers superior thermal conductivity compared to standard aluminum alloys, meaning heat absorbed from your brushless motor is transferred away from the fan housing and into the surrounding air more rapidly and completely. This matters enormously when you're running high-performance brushless setups that generate significant thermal load, particularly during extended race sessions or aggressive bashing where your motor is operating at sustained high RPM. The 16,000RPM fan speed generates a substantial volume of moving air, creating positive pressure that forces ambient air across your motor windings and timing bell, actively pulling heat away and preventing the motor from reaching throttle-limiting temperatures. The reverse polarity protection circuit is a thoughtful inclusion that demonstrates Team Corally's commitment to user experience—in high-pressure race situations or when rewiring between sessions, accidental polarity reversals happen, and this protection ensures that one mistake won't result in an expensive fan replacement. The 2-pin JST/Receiver plug is the industry standard for auxiliary fan connections on modern RC brushless systems, compatible with virtually every contemporary ESC and receiver configuration used in competitive UK RC racing and casual RC car enjoyment. Operating at a maximum of 8.75V, this fan is optimised for 2-cell LiPo battery systems (the standard 7.4V nominal configuration), which ensures it delivers peak cooling performance at your typical operating voltage without risk of overvoltage damage. The modest 0.65A current draw at 7.4V is exceptionally efficient, meaning this fan runs cool itself and adds negligible electrical load to your power distribution system. The 21-gram weight is negligible in the context of an 1/8-scale RC buggy or monster truck, and the extended 180mm wire length provides genuine installation flexibility for various chassis layouts and motor mounting configurations.

What's in the Box

• Team Corally Ultra High Speed Cooling Fan TF-40 (40mm, black and red)
• 2-pin JST/Receiver connector pre-installed

Frequently Asked Questions

• What size RC vehicles is this cooling fan designed for? — The Corally Ultra High Speed Cooling Fan is purpose-designed for 1/8-scale RC buggies, truggies, and monster trucks with brushless motors. These vehicle classes generate substantial motor heat due to their powerful brushless powerplants, making dedicated cooling systems essential for maintaining consistent performance during competitive racing or extended bashing sessions. The 40mm form factor and mounting specifications are optimised for the engine bay dimensions typical of these scales.
• Will this fan work with my 2-cell LiPo battery setup? — Yes, this fan is specifically engineered for 2-cell LiPo systems (7.4V nominal, up to 8.75V maximum). The 2-pin JST/Receiver plug connects directly to your receiver battery lead or ESC auxiliary output, making it the ideal cooling solution for standard 1/8-scale RC buggies, truggies, and monster trucks that typically run 2S LiPo configurations. The fan will operate reliably throughout your entire battery discharge cycle from 8.75V down to safe cutoff voltages.
• Is this cooling fan suitable for beginners to install? — Absolutely. The pre-installed 2-pin JST/Receiver connector and straightforward plug-and-play design mean installation requires no soldering, crimping, or complex wiring knowledge. If you're capable of plugging in a receiver battery lead or connecting accessories to your ESC, you can install this fan in under five minutes. The reverse polarity protection adds an extra layer of user-friendliness by preventing accidental damage from wiring mistakes.
• What is the difference between this 40mm fan and other cooling solutions? — The Corally Ultra High Speed Cooling Fan distinguishes itself through several key advantages: the T6 aluminium housing provides superior heat dissipation compared to plastic-bodied alternatives, the 16,000RPM speed generates more cooling airflow than slower fan designs, the reverse polarity protection safeguards your investment, and the standard JST/Receiver connector ensures compatibility with virtually every modern RC brushless system. For serious RC enthusiasts in the UK who demand reliable cooling without compromise, this fan represents the professional-grade standard.
• Can I use this fan continuously without damaging it? — Yes, the Corally Ultra High Speed Cooling Fan is engineered for continuous high-speed operation. The aluminium housing dissipates heat effectively, preventing the fan motor itself from overheating, and the 0.65A power draw is modest enough that the fan runs cool even during extended sessions. This is a purpose-built component designed to operate reliably throughout full racing days or back-to-back bashing runs.
• How do I mount this fan on my RC vehicle? — The 40 x 40 x 10.6mm dimensions are designed to fit standard 40mm fan mounting points found on most 1/8-scale RC buggies, truggies, and monster trucks. The mounting methodology varies depending on your specific vehicle, but most modern RC chassis feature dedicated cooling fan mounts or bracket points. Consult your vehicle's assembly manual for specific mounting location and hardware requirements for your particular model.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the CORALLY ULTRA HIGH SPEED COOLING FAN 40MM 6V8,4V BLACK/RED C-53112-1 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.