Overview

The Louise RC X-Uphill Black Mounted X-Maxx Hex 24mm tyres represent the pinnacle of high-performance tyre engineering for serious RC enthusiasts and extreme bashing setups. Designed specifically for the Traxxas X-Maxx platform, these factory-mounted tyres deliver exceptional durability and grip across the toughest terrain. Whether you're tackling grass, hard-packed clay, or launching your RC truck off massive jumps, the X-Uphill tyres are engineered to handle the extreme loads and stresses that come with powerful 1/5 scale bashing. These are not entry-level tyres — they're built for experienced RC car UK users who demand reliability and performance when pushing their vehicles to the absolute limit.

What sets the X-Uphill range apart from standard RC tyres is the innovative Micro Fiber Technology (MFT) integrated into the tread construction. This advanced engineering prevents the dreaded tyre ballooning effect that plagues conventional unbelt tyres during hard acceleration and high-speed runs. The result is a tyre that maintains its shape, delivers consistent contact patch, and provides superior stability even when your X-Maxx is airborne or cornering at maximum velocity. Combined with Louise RC's renowned Sport compound rubber formulation and professional pre-gluing onto high-strength nylon wheels, you're getting a ready to run RC tyre solution that's built to survive the most demanding bashing sessions.

These are complete wheel and tyre assemblies that arrive pre-assembled, pre-glued, and ready to bolt onto your Traxxas X-Maxx immediately. No messy gluing procedures, no searching for matching foam inserts, no guesswork about wheel compatibility — just pure performance straight out of the box. Whether you're a weekend basher, a competitive driver, or someone who simply refuses to compromise on quality, the Louise RC X-Uphill X-Maxx tyres deliver the performance, durability, and reliability you need for serious RC off-road action.

Key Features

• Micro Fiber Technology (MFT) Belt Construction — The textile belt woven into the tyre tread prevents tyre deformation and ballooning during powerful acceleration and high-speed runs, maintaining the tyre's shape and maximising the contact patch with the ground for superior grip and stability.
• Sport Compound Rubber Formula — Louise RC's specialist Sport rubber compound is engineered specifically for high-performance RC vehicles and provides outstanding wear resistance, excellent grip across varied surfaces, precise steering response, and compatibility with today's powerful brushless motor setups.
• Factory Pre-Mounted and Pre-Glued — Each tyre is professionally mounted onto its matching black wheel using precision-metered rubber cyanoacrylate adhesive, with every assembly quality-checked through spin and pull-testing to ensure a clean, durable bond that can withstand extreme forces without separation.
• DuPont Nylon Composite Wheels — The wheels are moulded from high-strength nylon composite material specially developed by DuPont for Louise RC, providing the perfect balance between flexibility to absorb impacts and toughness to withstand the extreme loads of big jumps and hard cornering.
• Matched Foam Inserts Included — Each tyre comes with precision-selected foam inserts matched for specific density and size to provide optimal damping, support tyre shape stability, and improve the overall suspension feel and traction characteristics of your X-Maxx.
• 24mm Hex Fitment — The wheels feature a 24mm hex connection specifically designed for Traxxas X-Maxx platforms, ensuring perfect fitment on both 6S and 8S models and delivering reliable, secure wheel attachment even under extreme acceleration and landing forces.
• Professional Construction and Quality Control — Louise RC's meticulous production process includes bead grinding, surface degreasing, precision adhesive application via dosing machine, controlled pressing for proper curing, and individual spin and pull-testing of every assembled tyre to guarantee exceptional quality and durability.

Technical Performance

The Louise RC X-Uphill tyres are engineered to excel in demanding conditions that would quickly wear out or fail standard RC tyres. The Micro Fiber Technology represents a significant technological advancement in RC tyre construction — the embedded textile belt in the rubber tread actively resists the forces that cause conventional tyres to balloon and deform during high-speed runs and aggressive acceleration. This stabilisation effect maintains consistent tread shape and maximises the contact patch, resulting in noticeably improved grip, faster steering response, and extended tyre lifespan. The Sport compound rubber is formulated with years of Louise RC's experience in high-performance RC tyre development, offering a medium-soft density that provides superior wear resistance compared to standard compounds whilst delivering outstanding road handling and compatibility with the high-power ratings of modern brushless motor systems. With a tyre diameter of 213mm and width of 98.2mm, the X-Uphill provides excellent ground clearance for jumping and landing, a wide contact patch for lateral stability during cornering, and predictable grip characteristics across grass, clay, and mixed terrain. The wheels themselves are crafted from DuPont-engineered nylon composite that's been developed specifically for Louise RC's applications — this material provides the right balance of flexibility to absorb impacts without cracking and structural rigidity to withstand the extreme stresses of acceleration, braking, and landing forces on a powerful 1/5 scale vehicle. The factory pre-gluing process uses specially formulated rubber cyanoacrylate adhesive applied with precision metering equipment, ensuring consistent adhesive coverage that bonds the tyre bead to the wheel rim without excess glue squeeze-out or weak spots. Every assembled tyre undergoes individual spin-testing and pull-testing to verify the integrity of the bond before leaving the factory. It's important to note that MFT-equipped tyres are typically slightly heavier and larger than non-belted equivalents, so you may wish to check and adjust your X-Maxx's gear ratio for optimal performance, and the increased grip level may warrant upgrading your steering servo to a higher-torque model if using a standard servo.

What's in the Box

• 2x Louise RC X-Uphill Sport Compound Tyres mounted on black 24mm hex wheels
• Foam inserts (pre-installed within each tyre assembly)
• Pre-glued tyre and wheel assemblies, ready to install

Frequently Asked Questions

• Are these tyres suitable for Traxxas X-Maxx 6S and 8S models? — Yes, the 24mm hex fitment is compatible with both Traxxas X-Maxx 6S and X-Maxx 8S platforms. These tyres are designed for front and rear use on either model, making them versatile for any X-Maxx setup.
• What does MFT (Micro Fiber Technology) actually do and why do I need it? — MFT is a textile belt woven into the tyre tread that prevents tyre ballooning — the deformation and shape change that occurs on standard tyres during hard acceleration and high-speed running. With MFT, your tyres maintain their shape, provide better ground contact, deliver more stable handling, and last significantly longer. This is particularly important on powerful vehicles like the Traxxas X-Maxx where tyre ballooning can cause unpredictable handling and premature tyre failure.
• Do I need to glue these tyres myself or are they ready to use? — These tyres arrive completely pre-mounted and pre-glued, using Louise RC's professional factory-applied rubber cyanoacrylate adhesive. Every assembly is quality-checked through spin and pull-testing before shipping. You can bolt them straight onto your X-Maxx and drive immediately — no gluing, no preparation required.
• Will these tyres work on other RC trucks besides the Traxxas X-Maxx? — The primary fitment is for the Traxxas X-Maxx, which uses 24mm hex wheels. Other vehicles with 24mm hex connections may physically fit, but Louise RC specifically recommends these tyres for the X-Maxx platform. Always verify that your vehicle uses 24mm hex wheels before purchasing.
• Are these tyres good for high-speed bashing? — Absolutely. The Sport compound formula and MFT belt construction are specifically engineered for high-speed performance and powerful acceleration. The MFT technology prevents the tyre deformation that would otherwise cause instability at speed, whilst the Sport compound delivers sharp steering response and excellent grip across varied surfaces, making these an excellent choice for weekend bashers and serious RC enthusiasts who demand reliable performance.
• Should I adjust my X-Maxx setup when fitting these tyres? — Louise RC recommends checking and adjusting your gear ratio after installing MFT-equipped tyres, as they are typically slightly heavier and larger than non-belted types. Additionally, because these tyres provide more grip than standard compounds, you may want to consider upgrading your steering servo to a higher-torque model to handle the increased steering loads, particularly if you're currently using a standard servo.
• What makes Louise RC tyres better than other brands available in the UK? — Louise RC has decades of experience developing tyres specifically for high-performance RC vehicles and powerful bashers. They are recognised across the RC hobby for meticulous manufacturing processes, use of DuPont-engineered materials, innovative technology like MFT, and uncompromising quality control. Every tyre assembly is individually tested before shipping, ensuring that you receive a product built to professional standards rather than generic off-the-shelf alternatives.
• Do the foam inserts come pre-installed? — Yes, the foam inserts are pre-selected for density and size and come pre-installed within each tyre assembly. They are matched to provide optimal damping, support tyre shape stability, and improve suspension feel, with no additional assembly or adjustment required.
• What is the tyre diameter and width? — The tyres measure 213mm in diameter and 98.2mm in width, providing excellent ground clearance for jumps, a wide contact patch for grip and lateral stability, and predictable handling characteristics across grass, clay, and mixed terrain.
• Are these tyres suitable for beginners? — These tyres are designed for high-performance bashing and demanding conditions, making them better suited to experienced RC users who understand vehicle tuning and maintenance. If you're new to RC, starting with standard tyres on a ready to run RC vehicle may be more appropriate, though if you have a Traxxas X-Maxx and want maximum performance and durability, the X-Uphill tyres are an excellent upgrade.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the LOUISE RC X-UPHILL BLACK MOUNTED X-MAXX HEX 24MM L-T3297B today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.