Overview
The Radient Futaba HD Extension Lead with Clip 900mm (RDNAC010208) is a robust servo extension cable designed for dependable connections in radio control models across the UK and beyond. Whether you're piloting an RC car UK enthusiast project, running a ready to run RC setup, or maintaining a competition-grade brushless RC vehicle, reliable servo connections are absolutely critical to safe and responsive control. This heavy-duty extension lead offers the quality and reliability you need to keep your RC hobby running smoothly, with professional-grade construction that ensures consistent signal transfer even in high-vibration environments typical of intense RC driving sessions.
Built specifically for compatibility with Futaba radio systems, this extension cable bridges the gap between your receiver and servo with confidence. The generous 900mm length provides flexibility in cable routing within your RC chassis, whilst the included connector clip helps secure the joint and reduce the risk of disconnection during aggressive driving, jumps, or rough terrain navigation. For RC enthusiasts in the UK seeking dependable servo extension solutions that won't compromise on performance, this Radient cable delivers exceptional value at an affordable price point.
Perfect for anyone upgrading their RC setup, maintaining existing systems, or building custom RC models from scratch, the Futaba HD Extension Lead represents a sensible investment in reliability and longevity.
Key Features
- 900mm Total Length — The 900mm length (including connectors) provides ample cable reach for flexible servo placement within your RC chassis without requiring multiple extensions, reducing potential connection points that could compromise signal integrity.
- Male to Female Futaba Connector — Designed with standard Futaba heavy-duty connectors in the recognised black, white and red configuration, ensuring seamless compatibility with all Futaba-equipped RC receivers and servo equipment used across the RC car UK market and internationally.
- 22AWG 60-Strand Construction — The 22AWG gauge with 60-strand copper wire construction delivers low electrical resistance, which is essential for maintaining clean servo signal transmission and preventing signal degradation that could cause lag or erratic servo response during racing or bashing.
- Connector Clip Included — A supplied connector clip secures the cable joint, significantly reducing the risk of disconnection in high-vibration environments typical of RC buggies, trucks and monster trucks experiencing rough terrain, jumps and intense driving conditions.
- Premium Build Quality — The cable features a professional 1.5mm outer diameter and robust construction with 2mm overall product diameter, providing durability and flexibility whilst resisting damage from repeated handling, sharp edges within your chassis, and the stresses of regular RC operation.
Technical Performance
The Radient Futaba HD Extension Lead represents professional-grade servo cable engineering at an accessible price point. The 22AWG wire gauge with 60-strand construction is specifically chosen to balance flexibility with electrical performance, delivering the low resistance necessary for clean servo signal transmission across the full 900mm length. This specification is crucial because poor signal quality can result in servo lag, jitter, or complete control loss — particularly problematic when driving competitive RC racing vehicles or navigating technical crawling courses. The Futaba connector system is industry-standard across countless RC enthusiasts in the UK and worldwide, making this extension ideal for anyone operating Futaba-equipped receivers. The inclusion of a connector clip transforms this from a simple cable into a complete cable management solution; the clip prevents the male and female connectors from separating under vibration, which is an underrated but essential feature for any RC vehicle experiencing rough treatment. The 1.5mm outer diameter provides excellent flexibility for routing cables through tight spaces within RC chassis whilst maintaining structural integrity. Whether you're running a high-speed ready to run RC model, competing in RC racing events, or enjoying casual bashing sessions, this extension lead delivers the reliability and performance expected from quality servo accessories.
What's in the Box
- Radient Futaba HD Extension Lead 900mm with male to female connectors
- Connector clip for securing the cable joint
Frequently Asked Questions
- What length extension lead do I need for my RC car? — The 900mm length of this Radient extension is suitable for most RC vehicles, providing sufficient reach from receiver to servo without excess coiling that could cause signal issues. If you need multiple extensions, always use quality cables like this Radient model rather than cheap alternatives that may compromise your control responsiveness.
- Is this extension compatible with my Futaba radio system? — Yes, this extension lead features standard Futaba heavy-duty connectors in the black, white and red configuration, making it compatible with all Futaba receivers and servos. If you're uncertain whether your radio system uses Futaba connectors, check your receiver documentation or contact our expert team at RC Model Shop.
- Why do I need a connector clip? — The included connector clip is essential for preventing disconnection under vibration. During intense driving, jumps, or rough terrain navigation typical of RC car UK use, vibration can gradually work connectors apart. The clip mechanically locks the joint, providing peace of mind that your servo will remain connected even during the most aggressive driving sessions.
- What is the difference between this cable and cheaper extension leads? — The 60-strand 22AWG construction provides superior signal quality, flexibility and durability compared to budget cables using thinner gauge or fewer strands. Premium construction like this ensures your servo responds precisely to your transmitter input without lag or jitter, which is especially important for racing or technical manoeuvres.
- Can I use this extension with non-Futaba servos? — This cable features Futaba connectors, so it is designed specifically for Futaba-compatible equipment. If your servos use different connector types (JR, Spektrum etc.), you would need an appropriately compatible extension lead.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Radient Futaba HD Extension Lead with Clip 900mm RDNAC010208 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Model Number: RDNAC010208
- Brand: Radient
- Product Type: Servo Extension Lead
- Connector Type: Futaba (Male to Female)
- Connector Colour Configuration: Black, White, Red
- Cable Length: 900mm (including connectors)
- Wire Gauge: 22AWG
- Strand Count: 60-strand copper construction
- Cable Outer Diameter: 1.5mm
- Product Diameter: 2mm
- Accessories Included: Connector clip
- Shipping Weight: 0.02kg
- Product Weight: 0.02kg
- Age Recommendation: 14+
- Barcode: 5051121244502
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.