Traxxas Sealed Receiver Box with Wire Cover Foam Pads and Silicone Grease TRX8924

Overview

The Traxxas Receiver Box & Mounting hardware TRX8924 is an essential replacement sealed receiver box designed specifically for high-performance Traxxas RC models. Whether you're running a Traxxas Maxx Slash short course truck or a WideMaxx monster truck, this sealed receiver enclosure provides the protection your vehicle's electronics need during intense off-road RC car adventures. As a dedicated RC enthusiast in the UK, you'll appreciate how this component keeps your receiver safe from water, dust and debris — critical considerations when bashing your RC car in challenging British weather conditions.

This is a genuine Traxxas spare part that delivers OEM quality and reliability. The sealed design means your radio receiver is shielded from moisture ingress, which is particularly important if you're running your RC truck through water crossings, muddy tracks or wet grass. For anyone operating a brushless 4WD RC short course truck or monster truck, protecting your electronics investment is essential, and this receiver box does exactly that.

RC Model Shop stocks genuine Traxxas spares and accessories for all your maintenance and upgrade needs. Whether you've damaged your existing receiver box or simply want a spare on hand for your RC collection, this TRX8924 sealed receiver enclosure is an affordable way to keep your vehicle running reliably.

Key Features

• Sealed Construction — The weatherproof design prevents water, dirt and moisture from reaching your receiver, extending the lifespan of your electronics and ensuring consistent radio signal reception even in damp conditions. This is essential protection for any serious RC car UK enthusiast.
• Complete Hardware Package — This kit includes everything you need to install the receiver box on your Traxxas model. The package contains 2.5x10 counter-sunk screws (pack of 2) and 3x15 cross-cap screws (pack of 3), ensuring you have the correct fasteners for secure mounting.
• Silicone Grease Included — A tube of silicone grease is supplied to create a waterproof seal around your receiver box. This lubricant helps prevent water seepage and maintains a tight seal around cable entry points, protecting your electronics from moisture damage during wet weather bashing sessions.
• Foam Pads for Shock Absorption — Pre-cut foam pads are included to isolate your receiver from vibration and impact. These protective pads cushion the receiver box against jolts and bumps, reducing stress on your electronics during high-speed off-road running.
• Wire Cover Included — The wire cover organises and protects your antenna and servo leads, preventing tangling and accidental damage. This keeps your installation neat and professional-looking whilst protecting wiring from chafing against the chassis.
• OEM Genuine Part — This is an official Traxxas replacement component, guaranteeing perfect fitment and compatibility with your model. Using genuine Traxxas spares ensures your vehicle performs as the manufacturer intended.

Technical Performance

The Traxxas TRX8924 sealed receiver box represents the manufacturer's solution to protecting your radio receiver in the demanding world of RC truck bashing. Built with a weatherproof design, this enclosure creates a protective barrier around your Traxxas receiver, ensuring that your signal reception remains strong whether you're running a 6S brushless Maxx Slash or a WideMaxx monster truck. The sealed construction is engineered to prevent water ingress during water crossings and muddy terrain running, which is particularly valuable for UK-based RC enthusiasts who frequently encounter damp conditions. The silicone grease and foam pads work together to create a shock-absorbing, moisture-resistant installation that protects your electronics from the stresses of high-speed 4WD running. The included stainless steel screws provide secure fastening that resists corrosion, whilst the wire management cover keeps your antenna and servo leads organised and protected from vibration damage during intense RC car sessions.

What's in the Box

• Sealed receiver box with mounting brackets
• Wire cover for cable management
• Foam pads for shock absorption and isolation
• Silicone grease for waterproof sealing
• 2.5x10mm counter-sunk screws (quantity: 2)
• 3x15mm cross-cap screws (quantity: 3)

Frequently Asked Questions

• Is this sealed receiver box compatible with all Traxxas models? — No, the TRX8924 is specifically designed for Traxxas Maxx Slash short course trucks and WideMaxx monster trucks. It is compatible with the following models: Traxxas Maxx Slash 1/8 4WD 6S Brushless Short Course Truck (all colour variants including Red, Green, Rock N Roll and Blue), and Traxxas WideMaxx Monster Truck (Red, Green and Rock N Roll versions). Check your model number before ordering to ensure compatibility.
• Why should I replace my receiver box with a sealed version? — A sealed receiver box protects your radio receiver from water, mud and debris that can cause signal loss or electronic failure. If you bash your RC truck in wet or muddy conditions, or regularly cross water features, a sealed box is essential insurance for your electronics. It's far cheaper to replace a receiver box than to replace a damaged receiver.
• What tools do I need to install this receiver box? — You'll need a small screwdriver (Phillips head for the counter-sunk screws and the cross-cap screws). The included hardware makes installation straightforward on most Traxxas models. No special tools are required.
• Does this receiver box come with a receiver? — No, this is the box and mounting hardware only. Your existing Traxxas receiver will fit inside this sealed enclosure. If your receiver is damaged, you'll need to purchase a replacement receiver separately.
• What is the purpose of the silicone grease? — The silicone grease creates a waterproof seal around your receiver box, particularly around cable entry points where the antenna and servo leads exit the enclosure. Applying a small amount of grease to these areas helps prevent water seepage during wet running.
• How does this improve my RC car UK performance? — In the context of UK weather conditions, a sealed receiver box prevents moisture-related signal dropout and receiver corrosion. By protecting your electronics from damp British climate conditions, you'll enjoy more reliable performance and longer component lifespan, whether you're bashing on grass, mud or in light rain.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Receiver Box & Mounting hardware TRX8924 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.