Overview
The Traxxas 22-T Pinion Gear (1.0 metric pitch) Set (fits 5mm shaft) TRX6495X is an essential replacement and upgrade component for serious RC enthusiasts running high-performance Traxxas brushless monsters and trucks across the UK. This precision-engineered pinion gear is specifically designed to work seamlessly with steel spur gears, making it an ideal choice for anyone looking to fine-tune the performance characteristics of their RC car UK setup. Whether you're a weekend basher pushing your Traxxas to the limit or a competitive racer seeking that perfect gear ratio balance, this pinion gear delivers the reliability and precision engineering that Traxxas is renowned for.
Built to exacting standards, the Traxxas 22-T Pinion Gear is compatible with an extensive range of Traxxas brushless RC vehicles, including the Maxx Slash 1/8 4WD 6S Brushless Short Course Truck, WideMaxx Monster Truck, X-Maxx Belted 4WD Brushless RTR 8S Monster Truck, and the XRT VXL-8S ready to run RC models. The 22-tooth configuration combined with the 1.0 metric pitch specification allows you to optimize acceleration and top speed characteristics to match your preferred driving style and terrain conditions. This is the kind of upgrade component that separates those who get decent performance from those who unlock the true potential of their ready to run RC vehicles.
As an authorised Traxxas retailer serving the RC community throughout the UK, RC Model Shop stocks genuine Traxxas replacement parts and upgrades to keep your fleet in peak condition. The TRX6495X pinion gear is the kind of precision component that demonstrates why Traxxas remains the trusted choice for RC car enthusiasts who demand reliability, performance and engineering excellence from their equipment.
Key Features
- 22-Tooth Configuration — The 22-tooth design provides an optimised balance between acceleration and top speed, allowing you to dial in the perfect performance characteristics for your driving style without sacrificing responsiveness or overall capability on the track or trail.
- 1.0 Metric Pitch Specification — This precision metric pitch rating ensures absolute compatibility with Traxxas steel spur gears and proper meshing engagement, which is critical for smooth power delivery, reduced wear and longevity of both the pinion and spur gears under sustained use.
- 5mm Shaft Fitment — The 5mm shaft bore is specifically engineered to fit Traxxas brushless motor shafts, providing a secure and precise connection that eliminates play and ensures reliable power transmission from your brushless motor to the drivetrain without slipping or shifting.
- Steel Spur Gear Compatible — Designed exclusively for use with steel spur gears, this pinion gear delivers superior durability and performance compared to plastic alternatives, with reduced noise and extended service life even under high-load racing conditions.
- Traxxas Genuine Component — As an official Traxxas part, the TRX6495X meets the manufacturer's exact specifications for quality, precision and reliability, giving you confidence that you're installing a component engineered specifically for your vehicle.
- Wide Vehicle Compatibility — This pinion gear fits an extensive range of current-generation Traxxas brushless RC models, from short course trucks to monster trucks to extreme scale vehicles, making it a versatile addition to any serious RC collection.
Technical Performance
The Traxxas 22-T Pinion Gear represents the pinnacle of precision manufacturing in RC drivetrain components. With its 1.0 metric pitch specification, this gear is engineered to work in perfect harmony with Traxxas steel spur gears, delivering smooth engagement, efficient power transfer and minimal backlash that would otherwise result in poor handling characteristics and accelerated wear. The 22-tooth count strikes an excellent middle ground in the Traxxas pinion lineup, offering significantly better acceleration than the 26-tooth variant whilst maintaining respectable top speed capabilities compared to the 20-tooth option. The 5mm shaft bore ensures a secure fit on Traxxas brushless motors, eliminating any possibility of slipping during hard acceleration or cornering. The set screw locking mechanism provides additional security, preventing any unwanted gear shift during intense driving sessions. Built to the exacting standards that Traxxas has maintained across its entire brushless RC range, including the Maxx Slash short course truck line, the WideMaxx monster truck platform, the legendary X-Maxx brushless RTR 8S vehicles and the XRT VXL-8S competition truck, this pinion gear is constructed from high-quality hardened steel that resists wear and maintains precise teeth engagement even after hundreds of operating hours. For RC enthusiasts in the UK seeking to maximise the performance of their brushless RC trucks and monster trucks, this is a component that delivers measurable improvements in drivability and overall vehicle responsiveness.
What's in the Box
- Traxxas 22-T Pinion Gear (1.0 metric pitch)
- Set screw for secure shaft mounting
Compatibility Guide
The Traxxas 22-T Pinion Gear TRX6495X is compatible with the following vehicles:
- Traxxas Maxx Slash 1/8 4WD 6S Brushless Short Course Truck (all colour variants including Red, Green, Rock N Roll, and Blue)
- Traxxas WideMaxx Monster Truck (Red, Rock N Roll, and Green variants)
- Traxxas X-Maxx Belted 4WD Brushless RTR 8S Monster Truck (Orange, Blue, Red, and Green)
- Traxxas X-Maxx Ultimate (Blue X and Green X editions)
- Traxxas XRT VXL-8S (Green, Black, Blue, and Orange variants)
- Traxxas XRT Ultimate (Blue X and Green X versions)
Frequently Asked Questions
- What is the difference between the 20-tooth, 22-tooth and 26-tooth pinion gears? — The tooth count directly affects your vehicle's performance characteristics. The 20-tooth pinion (TRX6494X) delivers maximum acceleration with slightly lower top speed, the 22-tooth (TRX6495X) provides balanced acceleration and speed, and the 26-tooth (TRX6497) prioritises top speed over initial acceleration. Choose based on your preferred driving style and terrain.
- Is this pinion gear suitable for beginners? — Yes, this is an excellent component for anyone new to RC tuning. It's a straightforward replacement part that requires only basic tools and mechanical knowledge to install. However, it's primarily a replacement component rather than something beginners would need immediately with a ready to run RC vehicle.
- What do I need to install this pinion gear? — You'll need a small wrench or hex key to remove the existing pinion gear set screw, the ability to carefully slide the gear onto your motor shaft, and then tighten the set screw securely. If you're unfamiliar with this process, RC Model Shop staff can provide guidance to ensure proper installation.
- Why must this be used with steel spur gears? — Steel spur gears are engineered to mesh precisely with this metric pitch pinion gear, ensuring smooth engagement and optimal performance. Using this pinion with plastic spur gears can result in poor meshing, increased noise, premature wear and potential drivetrain damage.
- How do I know which pinion gear tooth count I need? — Your choice depends on your driving conditions and vehicle use. For high-speed racing on smooth tracks, a 26-tooth gear maximises top speed. For bashing and off-road use requiring quick acceleration, a 20-tooth gear excels. The 22-tooth represents an excellent all-purpose compromise offering balanced performance.
- Will this pinion gear work with my specific Traxxas brushless RC model? — This gear is compatible with Traxxas Maxx Slash, WideMaxx, X-Maxx (including Ultimate), and XRT VXL-8S models. If your vehicle isn't listed in the compatibility section above, please verify compatibility before purchasing or contact RC Model Shop for clarification.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas 22-T Pinion Gear (1.0 metric pitch) Set (fits 5mm shaft) TRX6495X today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: Traxxas
- Model Number: TRX6495X
- EAN: 0020334649591
- Product Type: Pinion Gear Set
- Tooth Count: 22 teeth
- Gear Pitch: 1.0 metric pitch (Mod 1)
- Shaft Bore: 5mm
- Compatible With: Steel spur gears only
- Vehicle Compatibility: Traxxas Maxx Slash 1/8 4WD 6S Brushless Short Course Truck, Traxxas WideMaxx Monster Truck, Traxxas X-Maxx Belted 4WD Brushless RTR 8S Monster Truck, Traxxas X-Maxx Ultimate, Traxxas XRT VXL-8S, Traxxas XRT Ultimate
- Includes: Pinion gear and set screw
- Material: Hardened steel
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
