Menu

Traxxas 2065A Waterproof Servo Case and Gaskets TRX2063A

Model No: TRX2063A


Dispatched Within 3 Working Days

£4.95

£0.52

£4.43

Inc VAT

Supplier Stock
1 Year Warranty
We Accept

Overview

Keep your Traxxas 2065A waterproof sub-micro servo in perfect working condition with this genuine replacement servo case and gasket set from Traxxas. Whether you're running an RC car UK enthusiast setup, a trail truck like the TRX-4M Ford Bronco or Land Rover Defender, or any other compact RC model that relies on the 2065A servo, this replacement case is essential maintenance kit. The 2065A servo is renowned for its waterproof capabilities, and this case and gasket assembly ensures your servo maintains that critical protection against water ingress and weathering during off-road adventures.

If your existing 2065A servo case has become worn, damaged, or the seals have degraded after extended use, replacing it with this official Traxxas component will restore your servo to full waterproof condition. This is particularly important for ready to run RC models that venture into wet terrain, water crossings, or muddy conditions where maintaining a watertight seal around the servo housing is vital for reliability and longevity. RC enthusiasts across the UK who demand professional-grade maintenance parts choose genuine Traxxas replacement components for their vehicles.

This genuine Traxxas servo case assembly is a direct replacement designed specifically for the 2065A servo model. It is important to note that this case is not compatible with the older 2065 or 2065X servo models, so make sure you have the correct servo version before ordering. Restoring your 2065A servo to factory-fresh waterproof condition has never been easier or more affordable with this complete case and gasket kit from RC Model Shop.

Key Features

  • Complete Waterproof Case Assembly — This replacement includes the upper, lower, and middle sections of the servo housing, ensuring you have everything needed to fully rebuild and seal your 2065A servo against moisture and water ingress.
  • New O-Rings and Seals Included — Fresh o-rings and seals are provided with this kit, guaranteeing a perfect waterproof seal when reassembled; these critical components deteriorate over time and lose their effectiveness, so replacement seals ensure optimal protection.
  • Genuine Traxxas Component — This is an official Traxxas part manufactured to exact specifications, ensuring perfect fit, finish, and reliability with your 2065A servo.
  • Restores Full Waterproof Protection — If your servo has lost its water-resistant properties due to wear, cracking, or seal degradation, this case kit fully restores the 2065A to its original waterproof specification for continued use in wet conditions.
  • 2065A Specific Design — This case is engineered exclusively for the 2065A waterproof sub-micro servo and will not fit 2065 or 2065X models, ensuring precise compatibility and correct function.
  • Essential Maintenance Part — For RC car enthusiasts running trail trucks, crawlers, and other compact models in challenging UK terrain, having spare servo case components ensures you can perform field repairs and maintenance quickly.

Technical Performance

The Traxxas 2065A servo case and gasket assembly represents precision engineering in miniature servo housing design. The case comprises three separate sections — upper, lower, and middle — that work together to create a robust, sealed chamber protecting the servo's internal components from water, dust, mud, and other environmental contaminants. The inclusion of new o-rings and gaskets is critical because these elastomeric seals are subject to constant compression, thermal cycling, and chemical exposure during use, causing them to gradually harden and lose their sealing properties over time. By replacing the entire case assembly along with fresh seals, you restore the servo to its original waterproof specification. This is particularly important for RC car UK owners who regularly run their vehicles through streams, water crossings, or in heavy rain and muddy conditions typical of UK trail driving and off-road RC events. The 2065A servo is a sub-micro format servo, making it ideal for compact 1/18 scale and smaller RC models like the TRX-4M Ford Bronco and Land Rover Defender, which often operate in harsh, wet environments. The case's three-section design allows for comprehensive sealing while maintaining easy disassembly for maintenance and repair. When properly assembled with the supplied gaskets and o-rings, this case protects the servo's internal mechanics, gearing, and control electronics from corrosion and water damage, extending the service life of your servo and ensuring consistent, reliable performance season after season.

What's in the Box

  • Upper servo case section
  • Lower servo case section
  • Middle servo case section
  • New o-rings
  • New gaskets and seals

Frequently Asked Questions

  • Will this servo case fit my 2065 or 2065X servo? — No, this case is designed exclusively for the 2065A servo model and is not compatible with the older 2065 or 2065X servos. Make certain you have the correct servo version before purchasing this replacement case.
  • Why would I need to replace my servo case? — Over time, servo cases can crack from impacts, the seals and o-rings deteriorate and lose their waterproof properties, or the plastic housing may become worn. Replacing the case and seals is a cost-effective way to restore a servo to waterproof condition rather than purchasing an entirely new unit.
  • Is this case essential for waterproof operation? — Yes, absolutely. The case, along with the o-rings and gaskets, are what make the 2065A a waterproof servo. Without a properly sealed case with intact seals, the servo will no longer be water-resistant and can suffer internal corrosion and electronics damage if exposed to moisture.
  • Can I use old seals or do I need the new ones included? — You should always use the new seals and o-rings provided with this kit. Old seals have lost their elasticity and will not create a reliable waterproof seal, defeating the purpose of replacing the case.
  • What RC models use the 2065A servo? — The 2065A servo is commonly found in compact 1/18 scale ready to run RC models such as the Traxxas TRX-4M Ford Bronco and the Traxxas TRX-4M Land Rover Defender, as well as various other small-scale RC crawlers and trail trucks.
  • Is this difficult to install? — If you are comfortable disassembling and reassembling servo components, you should be able to swap the case and seals without difficulty. However, if you are unsure, it is recommended to seek assistance from an experienced RC technician or consult the manufacturer's service guide for your specific servo model.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Servo case / gaskets (for 2065A waterproof sub-micro servo) TRX2063A today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.

  • Brand: Traxxas
  • Model Number: TRX2063A
  • Part Number: 2063A
  • EAN: 0020334206350
  • Servo Type: Waterproof Sub-Micro Servo Case and Gasket Assembly
  • Compatible Servo: 2065A only
  • Not Compatible With: 2065 or 2065X servos
  • Case Sections Included: Upper, lower, and middle sections
  • Seals Included: New o-rings and gaskets
  • Intended Use: Restores 2065A servo to full waterproof condition
  • Primary Application: Compact 1/18 scale RC models including TRX-4M Ford Bronco and TRX-4M Land Rover Defender

We want to make sure your delivery goes smoothly, so here are some important details about our service:

  • For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
  • Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
  • Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
  • If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
  • We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
  • As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
  • If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
  • For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.