TRX9576

Overview

The Traxxas Sledge Wheelie Bar is an essential chassis upgrade for anyone serious about maximising the performance and durability of their 1/8 scale Traxxas Sledge Belted monster truck. Designed specifically to prevent catastrophic backflips during full-throttle acceleration, this wheelie bar has become an indispensable addition to the RC car UK community. Whether you're a weekend basher exploring the countryside, a competitive racer pushing your machine to its limits, or an experienced RC enthusiast looking to protect your investment, this sturdy wheelie bar delivers genuine value and peace of mind every time you throttle up.

The Sledge is already renowned as one of the most capable brushless RC monster trucks available to UK buyers, and the wheelie bar takes that capability to the next level by preventing the nose-up attitude that can lead to flips during aggressive acceleration. This is particularly important when running on flat terrain where the truck's incredible power can easily lift the front end excessively. The wheelie bar doesn't just prevent damage—it also makes your RC experience more enjoyable by allowing you to focus on driving rather than worrying about costly repairs after every hard launch.

This is the assembled black version, ready to bolt straight onto your Sledge without any additional assembly required. It comes complete with all the necessary fasteners, making installation straightforward for RC enthusiasts of all skill levels. If you're running a ready to run brushless RC monster truck and want to take your bashing sessions to the next level, this is the upgrade you've been looking for.

Key Features

• Flip Prevention Technology — The wheelie bar acts as a critical safety device that prevents your Sledge from tipping backward under aggressive acceleration, protecting your RC monster truck from expensive damage and keeping you in control at all times.
• Impact-Absorbing Flex Design — Rather than being a rigid component, the wheelie bar is engineered to flex and absorb impacts during less-than-perfect landings, ensuring your truck can handle rough terrain without transmitting every bump directly to the chassis and suspension.
• Pre-Assembled and Ready to Install — This wheelie bar arrives fully assembled in black, eliminating the need for time-consuming component assembly and allowing you to get straight to the important work of fitting it to your truck.
• Integrated Transport Handle — A convenient built-in handle makes it easy to transport your Sledge to your next driving location, whether that's a local park, a dedicated RC track, or a friend's garden—adding practical everyday value beyond just performance.
• Complete Fastener Package — The kit includes eight 3x20mm cap screws, providing all the hardware you need for secure installation without hunting through your spare parts box or making additional purchases.
• Genuine Traxxas Engineering — Manufactured by Traxxas using their proven design principles, you're getting a component that has been thoroughly tested and refined to work perfectly with your Sledge platform.

Technical Performance

The Sledge Wheelie Bar represents intelligent engineering applied to a seemingly simple component. Constructed from durable materials that can withstand the enormous forces generated by the Sledge's powerful brushless motor system, the wheelie bar must be rigid enough to prevent flips yet flexible enough to absorb impacts without transmitting destructive shocks to your chassis. The 3x20mm stainless steel cap screws provide secure fastening that will remain tight through countless bashing sessions. The flex characteristics have been precisely engineered to strike the perfect balance—it will hold your Sledge down during even the most aggressive acceleration runs, but it will also yield slightly when you land hard jumps, protecting both the wheelie bar itself and the critical chassis components mounted above it. This attention to detail is what separates genuine Traxxas parts from inferior aftermarket alternatives. The black finish matches the Sledge's aggressive styling perfectly, and the transport handle adds genuine practical value for those who regularly take their RC monster truck to different locations around the UK.

What's in the Box

• Traxxas Sledge Wheelie Bar in black (fully assembled)
• 3x20mm cap screws (8 pieces) for secure mounting

Frequently Asked Questions

• Which Traxxas Sledge models is this wheelie bar compatible with? — This wheelie bar is specifically designed for the Traxxas Sledge Belted 1/8 4WD Brushless Electric Monster Truck range, including the green, red, blue and orange colour variants. It is a direct fit for all Sledge Belted models and requires no modifications or adaptations.
• Do I need any special tools to install this wheelie bar? — Installation is straightforward and requires only basic hobby tools—typically a small hex wrench to tighten the provided 3x20mm cap screws. No modifications to your Sledge are necessary, and most users can complete installation in under ten minutes.
• Will the wheelie bar completely eliminate wheelies and flips? — The wheelie bar is highly effective at preventing backflips during normal acceleration, particularly on flat terrain. However, extremely aggressive launch techniques or landing from high jumps at extreme angles may still result in flips. The wheelie bar provides significant protection and control, but no component can guarantee 100% flip prevention under every possible circumstance.
• What is the difference between this black wheelie bar and the other colours available? — The wheelie bars in black, blue, orange, red and green are functionally identical and provide the same performance characteristics. The colour choice is purely aesthetic and allows you to coordinate with your Sledge's body colour or personal preference.
• Does the wheelie bar affect the Sledge's handling or manoeuvrability? — The wheelie bar only engages when the truck is attempting to rotate backward, so it does not affect normal handling, turning or forward acceleration. It sits passively during normal driving and only becomes active when needed to prevent excessive pitch-up.
• Is this wheelie bar suitable for beginners? — Absolutely. This is an ideal upgrade for beginners and experienced drivers alike. For beginners especially, the flip prevention feature allows you to learn acceleration control without constantly worrying about damaging your truck through accidental backflips. It makes the learning curve less punishing and more enjoyable.
• Can I use this wheelie bar on other Traxxas models? — This wheelie bar is specifically engineered for the Sledge Belted platform and its mounting points. While it might physically attach to some other models, it is designed and tested only for use with the Sledge Belted range, and using it on incompatible models is not recommended.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Wheelie bar, Black (assembled)/ 3x20 CS (8) TRX9576 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.