TRX9051

Overview

The Traxxas Driveshaft assembly, Front, extreme heavy duty with 6mm axle is a premium replacement component engineered for the most demanding RC enthusiasts in the UK. Whether you're running a Hoss 4X4 VXL, Rustler 4X4 VXL, Rustler 4X4, Slash 4X4, Ultimate Slash 4X4 VXL, or Slash 4X4, this extreme heavy-duty front driveshaft delivers the durability and performance needed for serious bashing and competitive racing. Built from steel using Traxxas' unique splined telescoping design, this component is specifically designed to handle the brutal torque of high-performance 540XL motors and the massive grip of premium tyres like Sledgehammer. If you're upgrading your RC car UK setup to handle more aggressive driving, this is the replacement component you need.

This fully assembled, ready-to-install driveshaft is part of the #9080 upgrade kit system, which means it's engineered to work seamlessly with Traxxas' extreme heavy-duty suspension architecture. The 6mm axle specification provides the perfect balance of strength and compatibility for the models listed above. Unlike standard driveshafts that limit suspension articulation, Traxxas' splined telescoping design allows full-range suspension travel, meaning your vehicle can tackle any terrain without compromise. Installation is straightforward thanks to Traxxas' commitment to easy assembly and perfect fitment across their range.

Available for either left or right side installation, this component comes complete with screw pins and requires no further assembly before fitting. For anyone serious about maximising their RC model's durability during high-torque applications, wheel-standing stunts, or aggressive off-road driving, this extreme heavy-duty front driveshaft represents a genuine upgrade over factory standard components. The engineering is proven across numerous Traxxas models, making this a trusted choice among UK RC car enthusiasts who demand reliability alongside performance.

Key Features

• Extreme Heavy-Duty Construction — Built from hardened steel specifically engineered to withstand the brutal torque loads generated by high-performance 540XL motors and the immense grip of premium tyres, ensuring longevity during aggressive driving and competitive use.
• 6mm Axle Specification — The 6mm axle diameter provides optimal strength-to-weight ratio for the #9080 upgrade kit compatibility, offering superior durability compared to standard components without adding excessive mass to your RC model.
• Splined Telescoping Design — Traxxas' unique engineering delivers full-range articulation across your suspension travel, meaning you never need to limit suspension geometry or compromise handling for durability, allowing maximum ground clearance and impressive off-road capability.
• Left or Right Installation — Supplied as a single universal component that fits either the left or right front position, reducing inventory requirements and providing flexibility for repairs or upgrades on either side of your vehicle.
• Fully Assembled and Ready to Install — Comes complete with all necessary screw pins and assembly, requiring no further preparation before fitting to your compatible Traxxas model, saving time and eliminating assembly errors.
• #9080 Upgrade Kit Compatibility — Specifically engineered for use with the Traxxas #9080-series extreme heavy-duty upgrade kit, ensuring perfect fitment and performance optimisation with other upgraded suspension components in the system.
• Perfect Fitment Guarantee — As a genuine Traxxas component, fitment is guaranteed to be perfect in compatible models including Hoss 4X4 VXL, Rustler 4X4 VXL, Slash 4X4, and Ultimate Slash 4X4 VXL, with no modifications or adjustments needed.
• Proven Performance Heritage — Designed specifically for monster truck and high-torque applications, these driveshafts have been tested under the most demanding conditions including wheel-standing and extreme grip scenarios.

Technical Performance

The Traxxas extreme heavy-duty front driveshaft assembly represents a significant engineering advancement in drivetrain durability for high-performance RC models. Constructed from hardened steel utilising a splined telescoping design, this component is specifically engineered to handle the punishment generated by Traxxas' 540XL high-torque motors whilst accommodating the massive grip of premium tyres such as the Sledgehammer range. The 6mm axle specification has been carefully selected to provide the optimal balance between strength and weight distribution for vehicles running the #9080 extreme heavy-duty upgrade kit. Unlike traditional solid driveshafts that can bind or limit suspension travel, Traxxas' telescoping design maintains smooth operation throughout the entire suspension range, whether your RC car is compressed at full articulation or extended for maximum ground clearance. The splined connection points are manufactured to exacting tolerances, ensuring zero play whilst allowing smooth rotational characteristics that translate directly to improved handling and acceleration. The hardened steel construction resists the torsional loads created during high-grip acceleration, wheel-standing manoeuvres, and rough terrain bashing that would fatigue or break ordinary components. Installation is straightforward, with the assembly arriving complete with all necessary screw pins and requiring only basic hand tools for fitting. This extreme heavy-duty specification is the direct result of Traxxas engineers testing these components in the most demanding driving scenarios, from competitive monster truck racing to hardcore recreational bashing on UK terrain that challenges lesser components.

What's in the Box

• Traxxas Driveshaft assembly, Front, extreme heavy duty with 6mm axle (1)
• Screw pins (1)

Frequently Asked Questions

• Will this extreme heavy-duty driveshaft fit my standard Traxxas model without the #9080 upgrade kit? — No, this component is specifically designed for use with the #9080-series extreme heavy-duty upgrade kit only and will not fit standard suspension parts. The #9080 kit components are engineered together as a system, so you'll need the complete upgrade kit for compatibility. If you're running a standard configuration, check with RC Model Shop for the appropriate driveshaft for your model.
• Can I use this driveshaft on both the left and right sides of my RC car? — Yes, this is supplied as a single universal component that can be installed on either the left or right front position, providing flexibility if you need to replace a damaged driveshaft or perform both-side upgrades simultaneously.
• What Traxxas models are compatible with this TRX9051 driveshaft? — This extreme heavy-duty front driveshaft is designed for use with the Hoss 4X4 VXL, Rustler 4X4 VXL, Rustler 4X4, Slash 4X4, Ultimate Slash 4X4 VXL, and Slash 4X4. These are the models that use the #9080 extreme heavy-duty upgrade kit system for which this component is engineered.
• How does the splined telescoping design benefit my RC model's performance? — The splined telescoping design allows your suspension to articulate through its complete range of travel without binding or limiting movement. This means you get maximum ground clearance and suspension travel for tackling obstacles and rough terrain, whilst the articulation keeps all four tyres in contact with the ground for improved traction and control that you simply can't achieve with components that restrict suspension geometry.
• Do I need any tools to install this driveshaft assembly? — Installation is straightforward with basic hand tools, and the assembly arrives fully assembled and ready to install with all necessary screw pins included. Traxxas has engineered these components for easy installation, so you should be able to fit this in a short time without specialist equipment.
• What makes this extreme heavy-duty specification different from standard driveshafts? — The extreme heavy-duty specification uses hardened steel construction specifically engineered to withstand the massive torque loads from 540XL motors and the grip of premium Sledgehammer tyres. Standard components are designed for moderate use, whereas these extreme heavy-duty shafts are built for aggressive wheel-standing, high-grip acceleration, and the demanding conditions that serious RC enthusiasts subject their vehicles to during competitive use and extreme bashing.
• Is this driveshaft suitable for beginners? — This component is technically suitable for anyone willing to perform the upgrade to an #9080 extreme heavy-duty kit system, though it's primarily designed for experienced RC users and competitive drivers who are pushing their vehicles to the limit. Beginners should verify they have the complete #9080 upgrade kit before purchasing, as this driveshaft won't work with standard suspension components.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Driveshaft assembly, Front, extreme heavy duty with 6mm axle (1)/ screw pins (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) TRX9051 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.