Traxxas Suspension Pins 44mm 2 pieces with E-clips TRX2640

Overview

The Traxxas Suspension Pins 44mm (2 pcs) with E-clips TRX2640 are essential replacement hardware for serious RC enthusiasts who demand the highest performance from their RC vehicles. Whether you're running a Traxxas Slash HD XL-5 short course truck or upgrading your existing setup, these heavy-duty steel suspension pins represent a significant performance upgrade over standard factory components. Available from RC Model Shop, your trusted UK RC retailer, these pins are engineered to deliver the precision, durability and smooth operation that competitive and recreational bashers alike have come to expect from Traxxas quality.

If you're familiar with RC car maintenance and suspension tuning, you'll immediately recognise the value of upgrading to purpose-built suspension pins. The stock screw pins found on many ready-to-run RC models are compromises designed for cost-effectiveness, but they simply cannot match the engineering precision and material quality of dedicated suspension hardware. These Traxxas pins are manufactured to exacting tolerances and constructed from heavy-duty steel, ensuring they will outlast inferior alternatives and deliver consistent performance throughout your RC car's lifespan. Whether you're a weekend basher exploring the trails around the UK or a competitive racer pushing your machine to the limit, these suspension pins will make an immediate difference in how your vehicle handles and responds.

The inclusion of E-clips with this package means you have everything needed for installation—no additional hardware shopping required. These pins are specifically engineered to work seamlessly with Traxxas vehicles, and they're particularly essential if you're planning to install a Traxxas tie bar upgrade (such as the #2532 model), which requires these exact pins for proper fitment and safe operation.

Key Features

• Heavy-duty Steel Construction — Manufactured from robust steel rather than softer materials, these suspension pins are considerably stronger than stock alternatives, resisting bending and deformation even under extreme driving conditions or high-impact impacts common in RC car use.
• Precision Engineering and Tight Tolerances — Traxxas suspension pins are machined to exact specifications that ensure perfect fitment in your vehicle's suspension mounting points, eliminating the slack and play that can occur with lower-quality pins and compromising handling precision.
• Reduced Friction Pivot Action — The smooth, precisely-dimensioned pin surfaces allow suspension components to pivot freely without binding or catching, creating responsive and predictable handling that translates directly into better control and faster lap times.
• Included E-clips — The package includes E-clips (retaining clips) that secure the pins in place, ensuring safe operation and preventing accidental loss of hardware during intense driving sessions or maintenance work.
• Designed for Superior Performance Upgrades — These pins are the required hardware for installing the Traxxas #2532 tie bar, making them essential if you're upgrading your suspension geometry for improved handling characteristics or preparing your vehicle for competitive racing.
• Compatible with Multiple Traxxas Models — These suspension pins work with the entire Traxxas Slash HD XL-5 short course truck range, including all colour variants available in the UK market, from the classic green through to red, blue and orange finishes.
• OEM Traxxas Quality Assurance — As official Traxxas replacement parts sourced through authorised UK retailers, you can be confident that these pins meet the same exacting quality standards as the components installed on new ready-to-run RC vehicles.

Technical Performance

The engineering behind these suspension pins reflects Traxxas's commitment to performance and durability. At 44mm in length, they're specifically sized to match the suspension geometry of the Slash HD XL-5 platform, one of the most popular short course trucks in the UK and worldwide. The heavy-duty steel material selected for these pins offers superior strength-to-weight ratio compared to alternative materials like aluminium or plastic, whilst maintaining the precise dimensional accuracy required for smooth operation. When you replace worn or damaged factory pins with these Traxxas units, you're not simply restoring your vehicle to original specification—you're actually upgrading the suspension's responsiveness and reliability. The tight manufacturing tolerances mean less play in the suspension joints, which translates to more predictable handling behaviour, better feedback through the chassis, and improved consistency from run to run. The smooth pivot action enabled by precision engineering reduces friction losses that would otherwise absorb energy and slow your cornering speeds. For UK RC enthusiasts running competitive short course events or simply enjoying high-speed bashing sessions at local tracks and outdoor venues, upgrading to these genuine Traxxas suspension pins is one of the most cost-effective performance modifications available.

What's in the Box

• 2 x Suspension Pins (44mm length)
• E-clips for securing pins

Compatibility

• Traxxas Slash HD XL-5 1:10 2WD RTR Short Course Truck (all colour variants: Green TRX58234-8-GRN, Red TRX58234-8-RED, Blue TRX58234-8-BLUE, Orange TRX58234-8-ORNG)
• Traxxas #2532 Tie Bar installation (required hardware)

Frequently Asked Questions

• What exactly are suspension pins and why would I need to replace them? — Suspension pins are the small steel rods that allow suspension components like A-arms to pivot and move vertically as your RC vehicle navigates uneven terrain. Factory pins can wear out, bend under impact, or suffer from manufacturing imprecision that creates excess play in the suspension. Upgrading to these Traxxas pins restores precise handling, reduces friction, and provides improved durability for vehicles used regularly in UK bashings and racing.
• Are these suspension pins suitable for my Traxxas Slash HD? — Yes, these 44mm pins are specifically engineered for the Traxxas Slash HD XL-5 short course truck platform. They're available in compatible versions for all colour variants sold in the UK market. If you own any Slash HD XL-5 model, these are the correct replacement pins.
• Do I need any additional tools or hardware to install these pins? — The E-clips are included in the package, so you have all the retaining hardware needed. Installation requires basic RC car maintenance tools such as a small punch or the pin tool that typically comes with Traxxas vehicles. If you're unfamiliar with suspension work, we recommend consulting your vehicle's assembly manual or contacting our team of experienced RC specialists at RC Model Shop for guidance.
• How often should I replace my suspension pins? — Suspension pins don't wear out on a fixed schedule—it depends on how heavily you use your RC car. Regular bashers who run their vehicles several times weekly should inspect pins every few months and replace them if they show signs of bending, scoring, or loose fit. Competitive racers often replace pins as part of regular maintenance routines. These heavy-duty Traxxas pins will last considerably longer than factory alternatives.
• What is the #2532 Tie Bar mentioned in the product description? — The #2532 is a Traxxas upgrade component that improves suspension geometry and handling by connecting the suspension arms in a different configuration. These suspension pins are the required hardware for installing a tie bar, making them essential if you're planning this upgrade to your Slash HD XL-5.
• Why should I choose genuine Traxxas parts over aftermarket alternatives? — Genuine Traxxas parts are engineered specifically for your vehicle's suspension geometry and design tolerances. Aftermarket pins from unknown manufacturers may have dimensional inconsistencies that cause poor fitment, excess play, or binding. Traxxas parts guarantee proper fit, superior material quality, and optimal performance—plus you're buying from an authorised UK retailer with expert support available if needed.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Suspension pins, 44mm (2 pcs) with E-clips TRX2640 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.