Overview
The FTX Tracer Metal Front CVA Shafts, Pins and M4 Nuts (FTX9780) are essential upgrade components for owners of the FTX Tracer 1/16 scale RC monster truck and truggy range. These precision-engineered metal front constant velocity shafts represent a significant performance upgrade over standard plastic components, offering enhanced durability and improved handling characteristics for both recreational bashers and serious RC enthusiasts in the UK. Whether you're upgrading your existing FTX Tracer RTR model or building a custom setup, these metal CVA shafts deliver the reliability and performance you need for consistent, predictable driving experiences.
FTX has established itself as a trusted name in the RC hobby community, delivering quality ready-to-run vehicles at competitive prices. This spare parts component reflects that same commitment to quality engineering. The metal construction provides superior strength compared to plastic alternatives, reducing flex under acceleration and cornering loads. This is particularly important for high-performance driving on challenging terrain, where aggressive power delivery and sharp turning can place significant stress on the drivetrain. Upgrading to metal CVA shafts is a popular modification for RC car UK enthusiasts looking to improve durability and handling precision.
Compatible with both the FTX Tracer monster truck and truggy variants, as well as BlackZon Slyder models, these shafts offer excellent value for upgrading your RC vehicle's transmission system. The complete kit includes metal shafts, pins, and M4 nuts, providing everything needed for installation on compatible models. This makes the upgrade process straightforward for users with basic mechanical knowledge.
Key Features
- Metal Construction — The front CVA shafts are manufactured from durable metal rather than plastic, providing superior strength and resistance to bending under load. This eliminates the flex and potential failure points that can occur with plastic alternatives, delivering more reliable performance during aggressive driving and rough terrain use.
- Constant Velocity Design — CVA (constant velocity axle) shafts maintain consistent power delivery through the entire range of suspension travel and steering angles. This ensures smooth, predictable handling characteristics and improved traction control, which is essential for maintaining control on uneven ground and during high-speed manoeuvres.
- Complete Upgrade Kit — This package includes metal shafts, precision pins, and M4 nuts, supplying all components necessary for a professional-standard installation. You don't need to source additional hardware from other suppliers, saving time and ensuring component compatibility.
- Wide Model Compatibility — Beyond the FTX Tracer range, these shafts are also compatible with BlackZon Slyder models in both monster truck and stadium truck configurations. This broad compatibility makes them a versatile upgrade choice for owners of related 1/16 scale vehicles.
- Precision Engineering — FTX components are manufactured to exacting standards, ensuring tight tolerances and reliable fitment. This precision engineering minimises wear and extends the service life of both the shafts themselves and connected drivetrain components.
- Performance Upgrade — Upgrading from standard plastic shafts to these metal components noticeably improves vehicle handling, reduces slop in the drivetrain, and enhances overall transmission efficiency. You'll experience more direct power transfer and improved cornering performance.
Technical Performance
The FTX Tracer Metal Front CVA Shafts represent a significant engineering upgrade that directly impacts the performance characteristics of your 1/16 scale RC monster truck or truggy. Metal construction provides substantially greater strength-to-weight ratio compared to plastic alternatives, allowing the shafts to withstand the torsional loads generated by brushless motors and aggressive driving without deflection or failure. The constant velocity design ensures that power is delivered smoothly and consistently regardless of suspension position, resulting in improved traction on uneven terrain and more predictable handling during tight cornering. Installation is straightforward on compatible FTX Tracer models (including RTR variants in blue, red, orange, and other colours) as well as BlackZon Slyder monsters trucks and stadium trucks in all available colours. The precision pins and M4 nuts included in the kit ensure professional-standard assembly with proper component alignment and secure fastening. For UK RC car enthusiasts seeking to enhance the durability and performance of their transmission system, these metal CVA shafts deliver measurable improvements in reliability and handling precision that justify the upgrade investment.
What's in the Box
- Metal front CVA shafts
- Precision pins for shaft assembly
- M4 nuts for secure fastening
Frequently Asked Questions
- What FTX Tracer models are these shafts compatible with? — These metal CVA shafts are compatible with the complete FTX Tracer 1/16 scale range, including all RTR monster truck variants (available in blue, red, orange, and other colours) and truggy models. They are also compatible with BlackZon Slyder monster trucks and stadium trucks in all colour options.
- Will these shafts improve my RC monster truck's performance? — Yes, upgrading to metal CVA shafts from plastic components delivers noticeable improvements in handling precision, reduces drivetrain slop, and enhances overall transmission efficiency. You'll experience more direct power transfer to the wheels and improved traction characteristics, particularly during cornering and acceleration on challenging terrain.
- Are these suitable for beginners? — Installation requires basic mechanical knowledge and tools such as a hex wrench set. Beginners with some mechanical aptitude can successfully install these shafts by following the FTX manual instructions. However, if you're completely new to RC car maintenance, you may prefer to have an experienced RC hobby shop technician perform the installation.
- What is the difference between metal and plastic CVA shafts? — Metal shafts offer superior durability, reduced flex under load, longer service life, and improved transmission efficiency compared to plastic alternatives. While plastic shafts are adequate for casual use, metal shafts are the preferred choice for regular driving, aggressive bashing, and competitive racing. The upgrade cost is modest relative to the performance benefits delivered.
- Do I need any additional tools for installation? — You'll need standard RC model tools including hex wrenches (Allen keys) to remove the old shafts and install the new metal components. The kit includes the shafts, pins, and M4 nuts, so no additional hardware is required.
- Are these genuine FTX parts? — Yes, these are official FTX components manufactured to the brand's quality standards. Purchasing from authorised retailers like RC Model Shop ensures you receive genuine parts with proper warranty support.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the FTX Tracer Metal Front CVA Shafts, Pins and M4 Nuts FTX9780 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Product: FTX Tracer Metal Front CVA Shafts, Pins and M4 Nuts
- Manufacturer: FTX
- Model Number: FTX9780
- EAN: 5056135730959
- Component Type: Transmission upgrade
- Shaft Material: Metal
- Included Components: Metal CVA shafts, precision pins, M4 nuts
- Compatible Vehicles: FTX Tracer 1/16 RTR Monster Truck (Blue, Red, Orange variants), FTX Tracer 1/16 4WD Monster Truck RTR, FTX Tracer Brushless 1/16th 4WD Monster Truck RTR, FTX Tracer 1/16 RTR Truggy, FTX Tracer 1/16 4WD Truggy Truck RTR
- Also Compatible: BlackZon Slyder MT 1/16th 4WD Monster Truck (Green, Blue, Orange, Red, Yellow), BlackZon Slyder ST 1/16th 4WD Stadium Truck (Red, Gold, Green, Blue, Orange, Yellow)
- Shaft Type: Constant Velocity (CVA)
- Installation: Front axle position
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
