Overview
The PRB Driveshaft and Stuffing Tube is an essential replacement part for the Pro Boat River Jet Boat RTR, designed to keep your RC boat running smoothly on the water. This genuine Pro Boat component is part of the driveline assembly that transfers power from the motor to the jet pump, making it a critical element of your boat's propulsion system. Whether you're repairing after an accident, replacing worn components during routine maintenance, or upgrading your River Jet setup, this driveshaft and stuffing tube assembly ensures reliable performance and authentic compatibility with your vessel.
For RC boat enthusiasts across the UK looking for quality replacement parts, the PRB282040 offers genuine Pro Boat engineering and reliability. The driveline is one of the most important systems in any jet-powered RC boat, and maintaining it with authentic parts ensures your boat continues to perform at its best. This replacement part is specifically engineered for the 23-inch River Jet Boat RTR model, guaranteeing perfect fitment and seamless integration with your existing setup without any modifications required.
RC Model Shop stocks this essential part as part of our comprehensive range of Pro Boat River Jet spares and upgrades. Our selection includes jet pump essentials such as impellers, wear rings, stators, steering nozzles and intake grates, plus complete driveline components like shafts, couplers, bearings and seals. Whether you're a weekend racer, a casual boater, or someone who enjoys pushing their RC boat to its limits, having genuine spare parts on hand ensures you can get back on the water quickly and keep your boat performing at peak efficiency.
Key Features
- Genuine Pro Boat Component — This is an official replacement part manufactured by Pro Boat, ensuring it meets the exact specifications and quality standards required for your River Jet Boat RTR. Using genuine parts guarantees compatibility and prevents potential damage caused by inferior aftermarket alternatives.
- Perfect Fitment for River Jet Boat — Specifically designed for the 23-inch River Jet Boat RTR model, this driveshaft and stuffing tube requires no modification and installs directly into your existing boat without any additional adapters or engineering required.
- Complete Driveline Assembly — The stuffing tube component seals the driveline opening, preventing water ingress and protecting the internal bearings and seals from damage and corrosion, which is crucial for maintaining reliability in wet conditions.
- Essential Maintenance Component — Regular inspection and replacement of driveline parts is recommended by Pro Boat to keep your jet pump running smoothly, and this assembly is a key element of proper maintenance routines.
- Affordable Replacement Solution — At £18.99, this is a cost-effective way to maintain your RC boat without breaking the bank, especially compared to replacing the entire jet pump assembly.
Technical Performance
The driveshaft and stuffing tube assembly represents Pro Boat's commitment to engineering durable components that can handle the stresses of RC boat operation. The stuffing tube is a critical seal component that prevents water from entering the driveline cavity whilst allowing the shaft to rotate freely. This assembly is manufactured to tight tolerances to ensure smooth power transmission from the motor to the impeller without vibration or wobble. The materials and construction methods used in this component are designed to withstand the torque loads and rotational forces generated by brushless motors commonly used in modern RC boats. Proper maintenance of the driveline, including regular re-greasing with marine grease and inspection for wear, helps extend the life of this component and ensures your River Jet Boat continues to perform reliably. The stuffing tube seal is particularly important in preventing salt water or contaminated fresh water from entering the driveline, which can cause rust and corrosion of internal bearings and shafts. By using this genuine replacement part, you're ensuring that your boat's propulsion system remains optimised for performance.
What's in the Box
- Driveshaft component
- Stuffing tube assembly
Maintenance and Care
- After each use on the water, rinse the driveline area with fresh water to remove salt or debris
- Inspect the stuffing tube seal regularly for signs of wear or water ingress
- Re-grease the driveline with marine-grade grease during routine maintenance as recommended by Pro Boat
- Check for any play or wobble in the driveshaft when manually rotating the propeller
- Replace this assembly if you notice water leaking into the driveline cavity or if the shaft develops excessive play
Frequently Asked Questions
- Is the PRB282040 driveshaft compatible with other Pro Boat models? — This driveshaft and stuffing tube is specifically engineered for the 23-inch River Jet Boat RTR. Whilst Pro Boat manufactures various jet boat models, each has its own driveline specifications. Always verify your model number before ordering to ensure correct fitment.
- How often should I replace the driveshaft and stuffing tube? — These components are designed to last for many hours of operation. However, they should be replaced if you notice water leaking into the driveline, excessive vibration, or visible wear and tear. Regular maintenance with marine grease can extend the life of these parts significantly.
- What tools do I need to install this part? — You'll need basic RC tools including hex drivers and possibly a coupler alignment tool. The River Jet Boat manual provides detailed installation instructions. Most users can complete the installation in under an hour with standard hobby tools.
- Why is the stuffing tube seal so important? — The stuffing tube acts as a critical barrier preventing water from entering the driveline cavity. Water ingress can cause rust, corrosion and damage to bearings and internal components, leading to complete driveline failure. A good seal extends the life of your entire jet pump system.
- Can I use this part with upgraded motors? — The driveshaft and stuffing tube are compatible with standard brushless motors commonly used in the River Jet Boat RTR. If you're installing a significantly higher-torque motor, consult the River Jet Boat manual to ensure the driveline can handle the increased power output.
- What should I do if water is leaking into my driveline? — If you notice water in the driveline cavity, it's likely the stuffing tube seal has failed or the component has developed a crack. This replacement assembly should resolve the issue. After installation, run the boat in shallow water and inspect for leaks before extended operation.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the PRB Driveshaft and Stuffing Tube: River Jet Boat Z-PRB282040 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
