RPM Rear Skid Plate for Arrma and Durango 1/8 and 1/10 Scale RC Vehicles RPM81442

Overview

The RPM Rear Skid Plate for Arrma and Durango 1/8th and 1/10th Scale RC vehicles is an essential chassis protection upgrade for any serious RC car enthusiast in the UK. Whether you're bashing on rocky terrain, tackling root-filled tracks, or navigating rough asphalt surfaces, your expensive aluminium chassis is constantly at risk of damage. One of the highest-cost replacement items on any RC vehicle is the chassis itself, especially when that chassis is a robust 3–4mm thick aluminium plate. Without proper protection underneath, your investment can suffer nasty scabs, scrapes and dents that will eventually necessitate a complete chassis replacement. The RPM Rear Skid Plate provides the perfect solution to help reduce this costly damage and extend the life of your RC monster truck, buggy or crawler.

This premium-engineered skid plate is specifically designed for ARRMA and Durango 1:8 and 1:10 scale vehicles where there is absolutely no factory protection for the underside of the chassis. Rocks, roots, asphalt and concrete can all create devastating damage to the rear of your chassis plate, but the RPM Rear Skid Plate shields the back end with 4mm of engineering-grade nylon that is not only extremely tough and durable but also slides up and over obstacles much easier than traditional aluminium would. If you own a brushless RC monster truck or high-performance buggy, this is a must-have upgrade that will save you money on repairs and keep your vehicle performing at its best for longer.

Ready to run RC vehicles from ARRMA and Durango represent some of the finest off-road machines available to UK RC car enthusiasts, but they deserve proper protection. The RPM Rear Skid Plate is the intelligent choice for anyone serious about protecting their investment and reducing downtime caused by chassis damage.

Key Features

• Engineering-grade nylon construction — Made from RPM's premium engineering-grade nylon material, this skid plate offers exceptional durability and toughness that far exceeds standard plastic alternatives. The material is specifically chosen because it not only withstands serious punishment from rocks and roots but also glides over obstacles more smoothly than aluminium, reducing drag and improving overall performance.
• 4mm thickness at rear section — The rear of the skid plate is a full 4mm thick, providing maximum protection and longevity where it's needed most. This substantial thickness ensures the skid plate will handle serious punishment from repeated impacts and abrasion without wearing through, keeping your chassis safe for season after season of aggressive bashing.
• Rolled leading edge design — The leading edge of the skid plate has been carefully rolled to a thin edge to reduce the likelihood of it catching on obstacles during aggressive driving. This thoughtful engineering detail prevents the plate from snagging on terrain or getting hung up, which could damage both the skid plate and your vehicle during aggressive rock crawling or trail bashing.
• Targeted protection for chassis ends — The areas most prone to damage on any RC vehicle are at the extreme ends of the chassis plate. This skid plate specifically targets protection for the back end of the chassis, where rocks, roots and asphalt cause the most frequent and costly damage to your expensive aluminium frame.
• Multiple vehicle compatibility — This skid plate is engineered to fit the ARRMA Kraton, Talion, Typhon and Senton, as well as the Durango DEX8, DEX8T, DNX8 and DESC10, making it an incredibly versatile upgrade for serious RC enthusiasts with multiple vehicles or those looking to future-proof their setup.
• Gearbox case compatibility assurance — The skid plate is designed to fit any ARRMA vehicle running the stock gearbox case sets #AR310427 or #AR310854, and any Durango vehicle running stock gearbox case set #TD210046, ensuring proper fitment and performance without modification.

Technical Performance

The RPM Rear Skid Plate represents the pinnacle of chassis protection engineering for high-performance RC vehicles. Constructed from RPM's premium engineering-grade nylon, this skid plate offers a perfect balance between flexibility and rigidity. The material selection is crucial—nylon flexes slightly upon impact to absorb energy that would otherwise transfer to your expensive aluminium chassis, yet maintains sufficient structural integrity to prevent permanent deformation. The 4mm thickness at the rear ensures this skid plate will withstand repeated impacts from rocks, roots, curbs and asphalt without developing cracks or stress fractures that would compromise its protective capabilities. The rolled leading edge is a masterclass in practical engineering; by tapering from the full 4mm rear section to a thin leading edge, RPM has eliminated the snagging hazard that plagues many competitors' designs. This geometry allows the skid plate to smoothly transition over obstacles rather than catching and hanging up, which is critical when driving at high speeds over rough terrain. The material's natural glide characteristics mean less friction and drag compared to metal alternatives, so you'll experience improved acceleration and handling whilst maintaining maximum protection. For UK RC enthusiasts running brushless RC vehicles—whether it's the lightning-quick ARRMA Kraton 6S V6 monster truck or the nimble Durango DEX8 buggy—this skid plate seamlessly integrates with your current setup without requiring any electrical modifications or compatibility concerns. The engineering-grade nylon is also resistant to the moisture, mud and grime encountered during typical UK outdoor RC sessions, resisting degradation and maintaining its protective properties season after season.

What's in the Box

• RPM Rear Skid Plate (pre-assembled and ready to install)

Frequently Asked Questions

• Which ARRMA and Durango RC vehicles is this skid plate compatible with? — The RPM Rear Skid Plate fits the ARRMA Kraton, Talion, Typhon and Senton models, as well as Durango DEX8, DEX8T, DNX8 and DESC10 vehicles. For ARRMA, it works with any vehicle running stock gearbox case sets #AR310427 or #AR310854. For Durango, it's compatible with vehicles running stock gearbox case set #TD210046. Always verify your vehicle's gearbox case number before ordering to ensure perfect fitment.
• How much protection does the RPM Rear Skid Plate really provide? — The skid plate is specifically engineered to protect the rear end of your chassis, which is the most vulnerable area on ARRMA and Durango vehicles. With 4mm of engineering-grade nylon construction, it dramatically reduces scabs, scrapes and dents caused by rocks, roots, asphalt and concrete. Customers report that the skid plate saves their expensive aluminium chassis from damage that would typically cost £20–50 to replace, making this an incredibly cost-effective investment in vehicle protection.
• Is the RPM Rear Skid Plate easy to install? — Yes, the RPM Rear Skid Plate comes pre-assembled and is designed as a direct fit for compatible ARRMA and Durango vehicles. Installation typically requires only basic tools and takes less than 15 minutes. No complex modifications or adjustments are necessary, making this an excellent upgrade for RC enthusiasts of all experience levels, from absolute beginners to seasoned competitors.
• Why is nylon better than aluminium for a skid plate? — Whilst aluminium is rigid, it dents and warps easily when impacted by rocks or roots. RPM's engineering-grade nylon flexes slightly to absorb impact energy, then returns to its original shape, preventing permanent damage. Additionally, nylon slides over obstacles more smoothly than aluminium, reducing drag and providing better overall performance. The material also resists corrosion and moisture degradation, making it ideal for UK outdoor RC racing conditions.
• Will this skid plate affect my RC vehicle's performance? — No, the skid plate will not negatively impact performance. In fact, the smooth glide characteristics of nylon may slightly improve acceleration and handling by reducing friction compared to an exposed aluminium chassis. The weight addition is minimal and won't measurably affect your vehicle's speed, control or handling characteristics.
• What is the difference between this and other skid plate options? — The RPM Rear Skid Plate features the distinctive rolled leading edge that prevents catching on terrain, full 4mm thickness for maximum durability, and premium engineering-grade nylon construction. These features combine to offer superior protection and longevity compared to basic plastic alternatives that crack under pressure or dent easily like metal competitors.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RPM Rear Skid Plate for Arrma and Durango 1/8th and 1/10th Scale RPM81442 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.