Overview
This is a pair of pre-mounted Jaeger HP 2.8" BELTED All-Terrain Tires Mounted on Raid Black Removable Hex Wheels. Pro-Line has a 2.8" tire with a low profile that can handle high speeds. Meet the Jaeger HP BELTED 1/10 Monster Truck tire! With its aggressive lateral tread design, this tire has the forward bite you desire, while having a self-cleaning ability. The center of the tread features grooves that allow for flexibility over rough terrain while maintaining stability.
Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the Jaeger HP tires that will prevent the tire from ballooning or expanding during use. This will give you maximum control to put the power down even at high speeds! The Jaeger HP 2.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive tread design. The Jaeger HP comes in at 2.16" wide and 4.85" tall and just like all Pro-Line's tires, they are proudly Made in the USA!
Please note that the Jaeger HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Jaeger HP 2.8" tires that is 75 mph or about 5,000 RPM. Overrevving your Jaeger HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The Jaeger HP comes conveniently Pre-Mounted on the Raid 2.8" Removable Hex Wheel design from Pro-Line! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go quickly and easily from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) or 14mm wheel hexes (Vorteks™ 3S, Granite™ 3S, Big Rock™ 3S). Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO633500 Replacement Hexes). You can even upgrade your wheels to 17mm wheel hexes (PRO633600 Sold Separately)! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the Jaeger HP 2.8" Belted tires now!
Please note: All tires & wheels are sold in pairs, unless otherwise noted
PRO1029910 | Jaeger HP 2.8" All Terrain BELTED Truck Tires Mounted on Raid Black 6x30 Removable (12mm & 14mm) Hex Wheels (2) for Vorteks™, Big Rock™ 3S, Granite™ 3S, Stampede® 2WD & 4WD Front and Rear
Stampede® is a registered trademarks of Traxxas® L.P.
Features
TIRE FEATURES - Molded-in High-Performance Herringbone Weave Pattern Belt Aggressive Lateral Tread Design
- Jaeger HP 2.8" Tire Will Not Balloon or Expand During Use
- Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces
- Belted Tires Give You Control to Put the Power Down
- Tire Size comes in at 2.16" wide and 4.85" tall
- Soft Foam Inserts Included
- Made in the USA, since 1982
WHEEL FEATURES - Removable Hexes Allow you to Change Wheel Offsets on the Fly
- Easily Replace Damaged Hexes or Upgrade to 17mm hexes
- The Most Common 12mm & 14mm Offsets are Included
- Fits any of Pro-Line's 6x30 Removable Wheel Hexes
- Wheel Made from High-strength, Durable DuPont Nylon Material
- Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
- M3 Wheel Hex Hardware Included
- Made in the USA, since 1982
Overview
Meet the Pro-Line 1/10 Jaeger HP BELTED F/R 2.8 inch MT Tires mounted on Raid Black Removable Hex Wheels — a premium tyre and wheel package designed for serious RC enthusiasts who demand high-speed performance and reliability. Whether you're running a Traxxas Stampede, ARRMA Big Rock, ARRMA Granite, ARRMA Vorteks or other 1/10 scale monster trucks, these pre-mounted tyres deliver exceptional grip and stability that will transform your RC driving experience. Pro-Line has engineered a 2.8-inch tyre with a low profile that can handle high speeds without compromising control, making this an ideal choice for bashers and competitors alike across the UK RC scene.
The Jaeger HP BELTED represents the pinnacle of Pro-Line's tyre technology. With its aggressive lateral tread design, this tyre delivers the forward bite you desire whilst maintaining self-cleaning ability to keep you rolling smoothly over loose and challenging terrain. The innovation lies in Pro-Line's proprietary High-Performance herringbone weave pattern belt moulded directly into the tyre structure — this belted construction prevents the tyre from ballooning or expanding during use, giving you maximum control to put the power down even at high speeds. This is engineered for the serious RC car enthusiast in the UK who wants genuine performance improvements, not just a replacement tyre set.
Just like all Pro-Line's tyres, the Jaeger HP is proudly made in the USA with uncompromising attention to quality and materials. The package includes removable hex wheels with multiple offset options included, meaning you can adapt these tyres to different applications and vehicles without needing to purchase additional wheels. This makes the Jaeger HP BELTED F/R 2.8 inch MT Tires an outstanding investment for anyone running multiple RC vehicles or wanting flexibility in their setup.
Key Features
- Molded-in High-Performance Herringbone Weave Pattern Belt — Pro-Line has developed proprietary technology to mould a reinforced belt structure directly into the tyre itself using a herringbone weave pattern, which is a significant engineering advancement that prevents the tyre from ballooning or expanding during use, ensuring consistent performance even at high speeds where standard tyres would fail.
- Aggressive Lateral Tread Design with Self-Cleaning Ability — The tyre features an aggressive tread pattern specifically engineered to provide excellent forward bite and grip whilst automatically clearing mud, dirt and debris from the tread as you drive, keeping the tyre clean and maintaining contact patch for superior handling.
- Soft M2 Compound for Incredible Grip — The medium-soft compound material provides exceptional grip on a variety of surfaces including hard-packed dirt, grass, asphalt and mixed terrain, giving you the consistent traction that Pro-Line is renowned for across the UK RC market.
- Centre Tread Grooves for Flexibility and Stability — The centre of the tread features carefully engineered grooves that allow the tyre to flex over rough and uneven terrain whilst maintaining structural stability, ensuring you maintain control whether you're driving over rocks, roots or high-speed berms.
- Low Profile Design for High-Speed Performance — These 2.8-inch tyres are engineered with a low profile that provides exceptional handling characteristics at high speeds, making them suitable for drivers who want to push their RC monster trucks to the limit without sacrificing control.
- Removable Hex Wheel Technology — The Raid wheels feature Pro-Line's unique 6x30 interlocking hex design secured by 6 M3 screws spaced 30mm apart, allowing you to easily change the offset of your wheel to fit different applications by simply swapping out the hex adapter — no need to purchase completely new wheels for different vehicles.
- Multiple Offset Options Included — The package includes both 12mm narrow offset hexes and 12mm wide offset hexes, as well as 14mm offset hexes, giving you the flexibility to fit these tyres to virtually any 1/10 scale monster truck without purchasing additional parts.
- Easy Wheel Hex Replacement — You can easily replace a damaged wheel hex without needing to replace your glued tyres, saving money on repairs and allowing you to swap between different vehicles quickly and efficiently.
- Upgrade Path to 17mm Hexes — If you want to further customise your setup, you can upgrade to 17mm wheel hexes (sold separately as PRO633600), giving you even more versatility as your RC hobby evolves.
- Pre-Mounted Ready to Use — These tyres come pre-mounted on the Raid wheels, meaning you can install them on your RC monster truck and get driving immediately without any tyre gluing, painting or wheel preparation required.
- Soft Foam Inserts Included — The package includes soft foam tyre inserts that provide cushioning and support inside the tyres, helping to maintain tyre shape and improving overall ride comfort and handling characteristics.
- Made in the USA Since 1982 — Pro-Line has been manufacturing premium RC tyres and wheels in the United States for over four decades, and these Jaeger HP tyres continue that legacy of quality and craftsmanship that UK RC enthusiasts have come to trust.
- Raid 10-Spoke Wheel Design — The wheels feature a professional 10-spoke design that mimics full-size racing wheels, giving your RC monster truck an authentic and aggressive appearance whilst maintaining the durability needed for serious bashing.
- High-Strength DuPont Nylon Construction — The wheel rims are constructed from reinforced DuPont nylon material, which provides exceptional strength and durability whilst keeping weight low for improved acceleration and handling.
Technical Performance
The Jaeger HP BELTED 2.8-inch tyres represent a significant advancement in monster truck tyre technology, particularly for UK-based RC enthusiasts looking to maximise performance on their ready-to-run RC vehicles. Measuring 2.16 inches wide and 4.85 inches tall, these tyres offer the perfect balance between ground clearance and agility. The soft M2 compound provides incredible grip across multiple surfaces, whilst the herringbone weave pattern belt structure prevents expansion and ballooning that can occur with non-belted tyres during high-speed driving. The engineering is meticulous: the centre tread grooves allow flexibility over rough terrain whilst the aggressive lateral tread design maintains stability during cornering and power application. The pre-mounted configuration on the Raid wheels means you're getting a fully integrated system with properly balanced wheels and tyres, eliminating the need for professional mounting equipment. The removable hex system is engineered with precision — the 6x30 interlocking design with M3 screw fasteners provides secure attachment that won't slip or loosen during aggressive driving. Important to note: the Jaeger HP 2.8-inch tyres have a maximum speed rating of 75 mph or approximately 5,000 RPM. Exceeding this speed rating can permanently damage the internal belt structure. Overrevving your tyres — caused by diffing out or holding the throttle whilst tyres are partially stopped — substantially increases RPM on free-spinning tyres and can break the internal belt, which is not covered under warranty. For serious bashers and competitors across the UK, this is critical information to understand before operating these tyres at their limits.
What's in the Box
- Pre-mounted Jaeger HP 2.8-inch BELTED All-Terrain Tires (pair) on Raid Black 6x30 Removable Hex Wheels
- 6x30 to 12mm Hex Adapters in Narrow offset (x2)
- 6x30 to 12mm Hex Adapters in Wide offset (x2)
- 6x30 to 14mm Hex Adapters (x2)
- M3 x 12mm long Socket Head Cap Screws (x12)
- Soft Foam Tyre Inserts (included inside tyres)
Vehicle Compatibility
These Jaeger HP 2.8-inch BELTED tyres are compatible with a wide range of 1/10 scale monster trucks and stadium trucks. The package includes all the hex adapters you need to fit these tyres to: Traxxas Stampede 2WD (front and rear), Traxxas Stampede 4WD (front and rear), ARRMA Vorteks 3S, ARRMA Granite 3S, ARRMA Big Rock 3S, and other compatible 1/10 scale monster trucks that use Pro-Line's 6x30 removable hex wheel system. The two different hex offset sizes (12mm and 14mm) ensure compatibility with virtually any front or rear mounting configuration on modern 1/10 scale monster truck platforms popular in the UK RC hobby.
Frequently Asked Questions
- What is the maximum speed rating for these Jaeger HP 2.8-inch tyres? — The Jaeger HP 2.8-inch BELTED tyres have a maximum speed rating of 75 mph or approximately 5,000 RPM. Exceeding this rating can permanently damage the internal belt structure and will not be covered under warranty. It's crucial to monitor your speed and avoid scenarios like diffing out or revving whilst tyres are partially stopped, as these activities substantially increase RPM on free-spinning tyres.
- Are these tyres suitable for high-speed bashing on UK terrain? — Yes, the Jaeger HP BELTED tyres are specifically engineered for high-speed performance with their low profile design and aggressive lateral tread pattern. The herringbone weave belt prevents ballooning, giving you maximum control even at speed. However, you must respect the 75 mph maximum speed rating to avoid belt damage.
- Can I use different hex offsets on the same vehicle? — Yes, the removable hex technology allows you to easily swap between the included 12mm narrow, 12mm wide, and 14mm offset adapters to fit different mounting positions on your RC monster truck, or to transition these tyres between different vehicles without purchasing new wheels.
- What surfaces do these tyres perform best on? — The Jaeger HP BELTED tyres are all-terrain design with self-cleaning tread patterns, making them effective on hard-packed dirt, grass, mud, rocks, and mixed terrain. The soft M2 compound provides excellent grip across all these surfaces, whilst the centre tread grooves allow flexibility over rough ground.
- Do I need to glue these tyres to the wheels? — No, the Jaeger HP tyres come pre-mounted and glued to the Raid wheels, so they're ready to install on your RC monster truck immediately without any additional preparation or glue work.
- Can I upgrade the wheel hexes to 17mm in future? — Yes, the removable hex system is designed for upgrading. You can purchase 17mm wheel hexes separately (PRO633600) to further customise your setup, though the 12mm and 14mm hexes included should cover most vehicle applications.
- Are these tyres made in the USA? — Yes, Pro-Line has been manufacturing RC tyres and wheels in the United States since 1982, and the Jaeger HP BELTED tyres continue this legacy of American manufacturing quality and craftsmanship.
- What is the difference between belted and non-belted monster truck tyres? — Belted tyres like the Jaeger HP feature an internal herringbone weave pattern belt that prevents the tyre from expanding or ballooning during high-speed use. Non-belted tyres can expand significantly, reducing control and consistency at speed. The belt also has speed limitations — if exceeded, it can break — but belted tyres offer superior handling and control at high speeds, making them the choice of serious UK RC enthusiasts.
- Will these fit my Traxxas Stampede or ARRMA Granite? — Yes, these tyres are specifically compatible with Traxxas Stampede 2WD, Traxxas Stampede 4WD, ARRMA Granite 3S, ARRMA Big Rock 3S, and ARRMA Vorteks 3S. The hex adapters included in the package cover the most common mounting configurations for these vehicles.
- What makes the Raid wheel design special? — The Raid wheels use Pro-Line's unique 6x30 interlocking hex design, secured by 6 M3 screws spaced exactly 30mm apart. This system allows you to change wheel offsets without replacing the tyres, and you can swap hexes between different vehicles, making it far more flexible and economical than traditional fixed-hex wheels.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the PRO 1/10 Jaeger HP BELTED F/R 2.8 inch MT Tires MTD 12mm/14mm Black G-PRO1029910 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
