The E-flite P-EFLA1060B 60A Brushless ESC V2 with switch-mode 5V BEC and EC3 connector is a lightweight, high-efficiency controller designed for sport, scale, and aerobatic electric aircraft. With support for 3–6S LiPo and 9–18 cell NiMH/NiCd packs, this ESC delivers 60A continuous current and up to 75A burst, making it ideal for .40–.60 size planes and mid-size helis. Its integrated switch-mode BEC powers up to seven analog or six digital servos, eliminating the need for a separate receiver battery and simplifying onboard power delivery.
Key features of the E-flite P-EFLA1060B 60A Brushless ESC
- 60A continuous current – supports high-output brushless motors for sport and scale aircraft
- 75A burst current – handles peak loads during aggressive flight maneuvers
- Switch-mode BEC – delivers 5V @ 5A continuous / 8A peak for multi-servo setups
- Programmable features – includes braking, soft start, throttle range, and five timing profiles
- Safe power-arm mode – prevents accidental motor starts during setup
- Auto shutdown – protects motor and electronics in case of signal loss or interference
- Finned heat sinks – support thermal management under sustained load
How does the E-flite P-EFLA1060B support multi-servo aircraft?
The E-flite brushless ESC with 13 AWG leads, 3.5mm bullets, and multi-servo support includes a robust switch-mode BEC capable of powering stabilization systems and multiple servos. This makes it ideal for aircraft with retracts, flaps, or cyclic-intensive heli setups. The integrated BEC reduces weight and complexity by removing the need for a separate receiver battery.
What makes this ESC suitable for both planes and helicopters?
The E-flite P-EFLA1060B with programmable braking, soft start, and 5 timing profiles features selectable throttle input ranges and startup rates tailored for fixed-wing and rotorcraft applications. Whether you're flying a Carbon-Z Cub SS or a Cessna 150, this ESC offers smooth throttle response and reliable performance across a wide range of brushless motors.
Is this ESC reliable for high-performance flying?
Absolutely. The best programmable ESC with 5V switch-mode BEC, EC3 input, and 75A burst rating is built for demanding flight profiles. Its thermal management system includes finned heat sinks to dissipate heat during extended operation, while safety features like auto shutdown and safe power-arm mode protect both pilot and aircraft. With EC3 input and 3.5mm bullet motor leads, installation is secure and straightforward.
Buy E-flite P-EFLA1060B 60A ESC for sport, scale, and aerobatic electric aircraft.
Overview
The E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) represents a significant advancement in electronic speed control technology for RC aircraft enthusiasts across the UK. This high-quality sensorless brushless electronic speed controller combines professional-grade performance with intelligent engineering, making it an ideal choice for sport, scale, and aerobatic electric aircraft. Whether you're flying a .40–.60 size plane, maintaining a mid-size helicopter, or upgrading an existing brushless RC setup, this ESC delivers the reliability and efficiency that discerning RC pilots demand.
Built with a robust integrated switch-mode BEC (Battery Elimination Circuit), this controller eliminates the need for a separate receiver battery, saving valuable weight and reducing onboard complexity—crucial advantages for any RC model looking to maximise flight performance. The V2 revision includes refined power delivery and enhanced thermal management, ensuring consistent performance even during extended flying sessions or aggressive aerobatic manoeuvres. With an EC3 connector as standard, this ESC integrates seamlessly with modern LiPo battery systems and is fully compatible with the latest Spektrum and other 2.4GHz radio systems used throughout the UK RC community.
RC Model Shop stocks the E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) as part of our comprehensive range of brushless RC electronics. This is the ESC of choice for pilots upgrading Carbon-Z Cub SS, Carbon-Z Cessna 150, and similar high-performance electric aircraft platforms, as well as anyone seeking a dependable speed controller for competitive or recreational flying.
Key Features
- 60A Continuous Current Rating — Delivers reliable 60 amps of continuous power to your brushless motor, supporting high-output motors used in sport and scale aircraft without thermal throttling or performance loss during sustained flight.
- 75A Burst Current Capability — Handles peak power demands during aggressive flight manoeuvres, rapid climbs, and aerobatic sequences, providing the headroom needed for dynamic flying styles and competition-level performance.
- Switch-Mode 5V BEC — The integrated Battery Elimination Circuit operates at 5 volts and delivers 5 amps continuous current or 8 amps at peak load, capable of powering up to seven analogue servos or six digital servos simultaneously, eliminating the need for a separate receiver battery pack.
- Sensorless Brushless Design — Operates without requiring hall-effect sensors, reducing cost and complexity while maintaining smooth throttle response and reliable motor control across a wide range of flying conditions.
- Multiple Battery Compatibility — Accepts 3–6S LiPo battery packs as well as 9–18 cell NiMH and NiCd packs, giving you flexibility to use your existing battery inventory or upgrade to modern LiPo technology.
- Programmable Braking Function — Allows you to enable or disable electronic braking, giving you precise control over motor behaviour during landing and descent phases of flight.
- Soft Start Feature — Gradually ramps motor speed on initial throttle input, protecting your motor windings and drivetrain components from shock loads and extending mechanical component lifespan.
- Five Timing Profiles — Offers selectable timing configurations tailored for different motor types and flying styles, allowing you to optimise efficiency, smoothness, and responsiveness to match your specific aircraft and preferences.
- Programmable Throttle Range — Enables precise calibration of throttle input mapping, ensuring your ESC works perfectly with any radio system and allows you to set custom deadband and endpoints.
- Safe Power-Arm Mode — Prevents accidental motor activation during setup and pre-flight checks, protecting you and others nearby from unexpected motor starts during equipment preparation.
- Auto Shutdown Protection — Automatically cuts motor power if signal is lost or interference is detected, protecting your motor and electronics whilst preventing uncontrolled flight behaviour due to radio link failure.
- Finned Heat Sinks — Purpose-designed aluminium heat sink fins maximise surface area for thermal dissipation, allowing the ESC to maintain stable performance during sustained high-current draw and extended flight operations.
- EC3 Connector — Industry-standard EC3 battery connector ensures secure, reliable power connections with excellent contact integrity and compatibility with modern LiPo batteries and charging systems.
- 13 AWG Power Leads — Heavy-gauge power cable minimises voltage drop during high-current operation, ensuring maximum power delivery to your motor whilst reducing heat generation in the wiring.
- 3.5mm Bullet Connectors — Motor connector uses reliable 3.5mm bullet connectors for secure motor connections and easy removal, standard throughout the UK RC community.
Technical Performance
The E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) is engineered to deliver outstanding performance across a wide range of aircraft types and flying disciplines. With 60 amps of continuous current and 75 amps burst capability, this controller handles brushless motors commonly found in .40–.60 size aeroplanes and mid-size helicopter platforms with ease. The switch-mode BEC architecture represents a significant efficiency advantage over older linear regulators, delivering stable 5-volt power whilst minimising power loss and heat generation. This efficiency translates to longer flight times, as the BEC draws minimal current from your main battery pack compared to alternatives. The integrated BEC capability to power up to seven analogue or six digital servos makes this ESC ideal for complex aircraft featuring retractable landing gear, flap systems, or other control surfaces requiring multiple servo actuation. The sensorless brushless design ensures smooth, responsive throttle control without the complexity and cost of sensor wiring, making this an elegant solution for both fixed-wing and rotorcraft applications. Built to the high standards expected from E-flite, a brand recognised throughout the UK RC community for quality and reliability, this ESC incorporates advanced thermal management through its finned aluminium heat sinks, allowing sustained operation at maximum current without thermal throttling. The programmable nature of this ESC—with adjustable timing profiles, braking, soft start, and throttle range calibration—means you can fine-tune performance to match your specific motor, battery configuration, and flying style, whether you're flying competitively or recreationally.
What's in the Box
- E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) with EC3 connector
- 13 AWG power leads with 3.5mm bullet motor connectors
- Instruction manual with programming guide
What You Need to Complete
- 3–6S LiPo battery pack (or 9–18 cell NiMH/NiCd pack)
- Brushless outrunner or inrunner motor rated for your aircraft weight and size
- Servos (up to seven analogue or six digital, powered by the integrated BEC)
- 2.4GHz radio system and receiver (Spektrum or compatible)
- Aircraft airframe (fixed-wing or helicopter)
- Propeller or rotor blades appropriate for your motor and aircraft type
- DYNC0029 adapter cable (if replacing ESC in Carbon-Z Cub SS or Carbon-Z Cessna 150 models)
Frequently Asked Questions
- Is the E-flite 60-Amp ESC suitable for beginners? — Yes, this ESC is suitable for pilots with basic RC experience who understand brushless motors and LiPo batteries. The plug-and-play design with EC3 connectors makes installation straightforward, and the programmable features allow you to start with default settings and refine performance as you gain experience. Beginners should ensure they are comfortable with LiPo battery safety and charging procedures before operating this ESC.
- What battery does this ESC need? — The E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) accepts 3–6S LiPo batteries or 9–18 cell NiMH/NiCd batteries. For most modern .40–.60 size sport and scale aircraft, a 4S or 5S LiPo battery is typical, offering excellent power delivery and flight duration. The 5V switch-mode BEC eliminates the need for a separate receiver battery, simplifying your power system.
- Can this ESC power multiple servos? — Absolutely. The integrated switch-mode BEC is rated for 5 amps continuous or 8 amps peak output, sufficient to power up to seven analogue servos or six digital servos. This makes it ideal for aircraft featuring retractable landing gear, flaps, or other control surfaces requiring multiple servo channels.
- What is the difference between the V2 and earlier versions? — The V2 revision incorporates refined power delivery characteristics and enhanced thermal management compared to earlier versions, ensuring more stable performance during sustained high-current operation and better heat dissipation under load. The V2 also benefits from updated firmware and programming features tailored to modern brushless motor technology.
- Is this ESC compatible with my existing aircraft? — The E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) is designed as a drop-in replacement for compatible E-flite aircraft platforms, particularly the Carbon-Z Cub SS and Carbon-Z Cessna 150. If you are upgrading these models or installing this ESC in a different aircraft, you may need the DYNC0029 adapter cable. Check your aircraft manual for ESC compatibility, or contact our team at RC Model Shop for guidance on fitment to your specific model.
- What radio systems does this ESC work with? — This ESC works with any modern 2.4GHz radio system and receiver, including Spektrum, Futaba, and other brands commonly used throughout the UK RC community. The ESC is purely a brushless speed controller with no built-in radio protocol specificity—compatibility depends on your receiver and servo system.
- Can I use this ESC in a helicopter? — Yes, this ESC is suitable for mid-size helicopter applications. The programmable timing profiles, soft start feature, and braking function can all be configured for helicopter operation, where smooth throttle response and reliable governor integration are essential. Consult your helicopter manual and the ESC programming guide for recommended settings.
- How do I programme this ESC? — The E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) is programmable via your radio transmitter using throttle channel inputs to access the programming menu. The detailed instruction manual included with the ESC guides you through each programmable parameter, including timing profile selection, soft start strength, braking enable/disable, and throttle range calibration. Programming takes just a few minutes once you understand the menu structure.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the EFL 60-Amp Pro Switch-Mode BEC Brushless ESC (V2) P-EFLA1060B today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
