The ARRMA Body Clip Retainer 1/10 Scale Black (4) – AR390165 is a purpose-built tether system that secures medium body clips to the bodyshell using strong, flexible rubber straps and a specially designed grommet, helping ARRMA drivers keep panels fastened and clips accounted for during hard running.
Key features of the ARRMA Body Clip Retainer 1/10 Scale Black (4) – AR390165
- Flexible rubber retainer – resists stretching and helps absorb movement during rough use
- Bodyshell grommet – tethers each clip directly to the shell for reliable retention
- Large pull tab – enables quick and easy body clip removal without fuss
- Medium body clips included – ready-to-fit convenience straight from the pack
- 4-piece set – ample retainers to equip front and rear posts or hold spares
- Black finish – discreet look that blends with most 1/10 scale shells
Why choose the arrma AR390165 body clip retainer for everyday RC running?
The arrma AR390165 body clip retainer addresses one of the most common workshop frustrations—lost clips after a roll-over or shell removal. ARRMA’s flexible rubber strap links each medium clip to a grommet seated in the bodyshell, so the clip stays with the panel rather than disappearing in grass or gravel. This simple, mechanical safeguard supports consistent running and shorter pit stops, especially when sessions involve repeated battery swaps or frequent shell checks. Because the retainers are designed specifically for ARRMA bodyshell hardware, installation remains intuitive and secure, delivering a dependable solution for routine bashing and practice laps alike.
How does the grommet design keep arrma body shell clips exactly where you need them?
At the heart of the design is the bodyshell grommet. Once the grommet is positioned in the body’s clip hole, it becomes the anchor for the strap and the clip. This arrangement keeps arrma body shell clips tethered to the panel, reducing the chance of misplacing hardware when removing the shell for checks or cleaning. The clean, integrated layout also means there are no loose pieces to thread every time; the strap, grommet and clip remain together as a tidy assembly. The result is confident handling of the shell at the bench, and fewer interruptions on the field when a quick re-fit is all that’s needed.
What makes the flexible rubber strap on arrma body clip retainers with pull tabs so effective?
ARRMA specifies a strong, flexible rubber strap to withstand repeated flexing, vibration and shock. This elasticity allows arrma body clip retainers with pull tabs to move with the shell rather than against it, reducing stress on the clip post and minimising the chance of tearing around the hole. Because rubber naturally recovers after stretching, the strap continues to provide consistent tension over time. The material choice, paired with the tailored length for 1/10 scale use, results in a tidy, low-profile fit that performs reliably during frequent on/off cycles throughout a typical running day.
How do large pull tabs speed up access on arrma AR390165 1/10 scale body clips?
The practical benefit of a large pull tab appears every time a shell comes off. The tab offers a firm surface to grip, making removal smoother and more controlled. With arrma AR390165 1/10 scale body clips, this means less fumbling and less risk of flicking a clip away from the bench. The pull tab also helps maintain consistent clip handling technique—grip, pull, store on the strap—so drivers adopt a routine that preserves hardware and minimises downtime. Over multiple packs in a session, those saved seconds add up to more running and less searching.
What’s included in the arrma AR390165 black body clip set and how does it streamline setup?
ARRMA supplies four retainers and four medium body clips in the arrma AR390165 black body clip set, along with fitting instructions. This ready-to-use bundle equips front and rear posts on most 1/10 shells, or provides extras to hold as spares. Because the clips are included, the set removes guesswork over clip sizing—everything matches out of the box. The black finish blends cleanly with most liveries, keeping attention on body design rather than hardware. For drivers who rotate shells, having a matched set on each panel keeps preparation consistent and changeovers quick.
Are arrma body clip set 1/10 scale retainers a maintenance upgrade as well as a convenience?
Although the primary goal is retaining clips, the retainers indirectly support cleaner maintenance habits. With a tether keeping each clip attached, panels are less likely to be handled carelessly or dropped while searching for spares, and shell removal happens in a controlled sequence. The arrma body clip set 1/10 scale approach encourages a repeatable, simple routine that protects paintwork and reduces minor scuffs around the clip holes. Over time, that careful handling helps shells look fresher for longer while keeping the pit area uncluttered and efficient.
How do arrma body clips with rubber retainers help during frequent battery swaps?
Battery changes are where tethered systems shine. The strap-and-grommet arrangement on arrma body clips with rubber retainers ensures each clip remains paired with its post location. Pop the clip out, lift the shell, complete the swap, and refit—without any risk of a clip rolling off the table or disappearing in the boot of the car. For drivers who run back-to-back packs or share a vehicle within a group, this streamlined sequence improves throughput and reduces avoidable downtime, keeping the day focused on driving rather than parts chasing.
Is this the best way to prevent misplaced clips on 1/10 shells?
For 1/10 applications that use medium body clips, a purpose-built tether is the most straightforward retention method. The combination of a large pull tab, a resilient rubber strap and a positive grommet anchor gives ARRMA users a practical, fuss-free way to keep hardware where it belongs. Describing it as the best fit for many everyday bashing scenarios is fair because the system is simple, mechanical and aligned with ARRMA’s own hardware standards—exactly what most hobbyists want when reliability matters more than novelty.
Looking for an affordable upgrade that adds real convenience?
Because the set includes four retainers and four medium body clips in a single pack, the value equation is compelling. Drivers gain a tidy instal, a repeatable workflow and fewer lost parts—all from a small, focused upgrade. That makes this an affordable quality-of-life improvement for any ARRMA 1/10 shell that relies on clips, especially for newcomers building good pit habits or experienced users standardising multiple bodies across a fleet.
How do you fit the arrma AR390165 body clip retainer 4 pack for a neat result?
Fitting is straightforward: seat the grommet in the shell’s clip hole, slide the strap onto the clip, and insert the clip through the body post as usual. The arrma AR390165 body clip retainer 4 pack is designed for a tidy, low-profile look that avoids clutter around the posts. A quick visual check confirms that each strap lies flat and that the pull tab remains easily accessible for removal. With all four corners equipped, the shell becomes faster to handle and more secure under vibration, landing and cornering.
Conclusion—why the arrma AR390165 1/10 scale body clips solution belongs in every pit bag
Consistency in the pits leads to consistency on the track. By keeping clips tethered to the shell, the ARRMA design builds reliability into routine tasks—shell off, battery swap, shell on—so drivers can focus on laps, not lost hardware. Included medium clips, a durable rubber strap, a positive grommet anchor and a large pull tab deliver a clean, integrated solution for 1/10 bodyshells in a discreet black finish. For a dependable, everyday improvement that makes ARRMA running smoother, buy the arrma AR390165 black body clip set today.
Brand, Model, and Product Type
- ARRMA AR390165 body clip retainer 1/10 scale black – high-quality tethered retainers designed to prevent loss of body clips during roll-overs or bodyshell removal
- ARRMA AR390165 body clip retainer set 1/10 scale – includes four durable body clip retainers and medium size clips for quick and secure installation
- ARRMA AR390165 body clip retainers 4 pack black – supplied with fitting instructions and ARRMA branded components for reliable track performance
- ARRMA AR390165 body clip retainer durable 1/10 scale design – constructed from strong, flexible rubber to absorb shocks and maintain clip security
- ARRMA body clip retainer AR390165 flexible rubber mount – features a special bodyshell grommet attachment for consistent and low-profile placement
- ARRMA body clip retainer AR390165 easy-fit secure hold – incorporates a large pull tab for fast clip removal even in wet or cold conditions
Dimensions and Weight
- Individual retainer dimensions: approximately 50mm x 10mm x 5mm
- Total kit dimensions including packaging: 120mm x 80mm x 30mm
- Weight of a single ARRMA AR390165 body clip retainer 1/10 scale black: 5g
- Total weight of ARRMA AR390165 body clip retainers 4 pack black including medium clips and instructions: 50g
Material and Build
- ARRMA AR390165 body clip retainer durable 1/10 scale design constructed from high-strength flexible rubber
- Special bodyshell grommet included to attach the ARRMA body clip retainer AR390165 flexible rubber mount securely
- Large pull tab designed for ARRMA body clip retainer AR390165 easy-fit secure hold and usability under extreme conditions
- ARRMA branded components to match original vehicle accessories
Kit Contents and Accessories
- 4 x ARRMA body clip retainers included in ARRMA AR390165 body clip retainer set 1/10 scale
- 4 x medium size body clips supplied with ARRMA AR390165 body clip retainers 4 pack black
- 1 x fitting instruction sheet included for ARRMA AR390165 body clip retainer 1/10 scale black
- Easy integration with ARRMA 1/10 scale RC vehicles for secure clip retention
Operation and Performance
- Tethers body clips to bodyshell to prevent loss during roll-over incidents or bodyshell removal
- Large pull tab ensures fast clip removal with minimal effort, even in wet or cold conditions
- Flexible rubber retains shape and grip under repeated use for long-term performance
- Grommet attachment allows low-profile mounting to maintain bodyshell aesthetics
Compatibility and Use Cases
- Designed for 1/10 scale RC vehicles requiring secure clip retention
- Can be used in off-road, on-road, and competitive RC environments to reduce lost clips
- ARRMA branded retainers match the standard ARRMA bodyshell design for aesthetic consistency
- Ideal for hobbyists, racers, and casual RC enthusiasts seeking reliable performance components
Additional Specifications
- Colour: Black for seamless visual integration with bodyshells
- Includes medium size body clips suitable for ARRMA 1/10 scale vehicles
- Strong rubber composition withstands repeated detachment and reattachment cycles
- Compact dimensions allow multiple retainers per kit without bulk
- Fitting instructions included for immediate installation and ease-of-use
- Durable design ensures clips remain tethered during aggressive RC operation
Warranty Category
- Manufacturer-specified warranty coverage: 1 year for ARRMA AR390165 body clip retainer 1/10 scale black
- ARRMA AR390165 body clip retainer set 1/10 scale is engineered to maintain reliability for one year
- All components supplied are ARRMA branded and quality controlled for consistent use on compatible vehicles
