Manufacturer: Associated
Part Number: AS70027
Drive: 2WD
Surface Type: On-Road
Assembly Type: Un-Assembled (Kit)
Scale: 1:10
Vehicle: Drag Racer
Motor Type: No Motor Supplied
Skill Level: Skill Level 4

Product Description of Associated DR10 Team Kit 1/10 drag car AS70027 

The Associated DR10 Team Kit 1/10 drag car AS70027 is a purpose-built no-prep RC drag racing kit engineered for precision, speed, and adjustability. Based on Team Associated’s championship-winning short course platform, this 2WD electric drag car delivers a low center of gravity, modular tuning options, and race-grade components. The Associated AS70027 no-prep RC drag racing kit is ideal for competitive racers and hobbyists seeking a customizable, high-performance chassis for street-style drag racing.

Key features of the Associated DR10 Team Kit 1/10 drag car AS70027

• Three-position wheelie bar – adjustable for launch control and stability
• Aluminum big bore coil-over shocks – race-grade damping for consistent traction
• Rear anti-roll bar – improves straight-line stability during acceleration
• Externally adjustable slipper clutch – fine-tune power delivery
• Sealed gear differential – reduces maintenance and improves reliability
• Water-resistant receiver box – protects electronics in varied conditions
• Hook-and-loop battery straps – compatible with NiMH and LiPo packs

What makes the Associated DR10 AS70027 adjustable suspension RC kit ideal for drag racing?

The Associated DR10 AS70027 adjustable suspension RC kit is designed for maximum control and tuning flexibility. Its fully adjustable suspension geometry includes vertical ball ends for roll center tuning and rugged steel turnbuckles for camber and toe adjustments. These features allow racers to dial in the perfect setup for different track conditions and tire configurations. Combined with the rear CVA driveshafts and lightweight composite chassis, the DR10 delivers consistent launches and stable runs down the strip.

How does the Associated 2WD drag race chassis with big bore shocks AS70027 enhance performance?

The Associated 2WD drag race chassis with big bore shocks AS70027 is optimized for straight-line speed and durability. The aluminum 12mm coil-over shocks provide superior damping, reducing wheel hop and maintaining traction during hard launches. The low center-of-gravity chassis keeps the car planted, while the lightweight aluminum top shaft and precision ball bearings reduce drivetrain resistance. These components work together to deliver smooth acceleration and responsive handling in no-prep drag racing environments.

Is the Associated street racing RC kit with anti-roll bar and slipper clutch beginner-friendly?

While designed for competitive performance, the Associated street racing RC kit with anti-roll bar and slipper clutch is accessible to intermediate builders. The kit format encourages hands-on learning, and the modular design simplifies assembly and maintenance. The externally adjustable V2 slipper clutch allows users to fine-tune launch characteristics without disassembly, and the sealed gear differential minimizes upkeep. With clear instructions and a robust chassis, this kit is a great step up for hobbyists ready to enter the drag racing scene.

What’s included in the Associated electric drag car with water-resistant electronics?

The Associated electric drag car with water-resistant electronics includes the DR10 Team Kit chassis, rear anti-roll bar, sealed gear differential, slipper clutch, big bore shocks, and a water-resistant receiver box. To complete the build, users will need a 540-size motor, ESC, 2-channel radio system, steering servo, battery pack, charger, drag racing body, tires, wheels, and polycarbonate paint. This modular approach allows racers to customize their setup for optimal performance and style.

Looking for the best Associated 1/10 RC kit for no-prep drag racing?

The best Associated 1/10 RC kit for no-prep drag racing combines adjustability, durability, and race-proven engineering. The DR10 Team Kit’s sealed gear diff, slipper clutch, and anti-roll bar provide the control needed for consistent launches, while the modular suspension and chassis layout support advanced tuning. Whether you're racing on asphalt or prepping for competition, this kit offers the precision and reliability serious racers demand.

Is this an affordable Associated rear-wheel drive drag car with adjustable camber?

Yes, the affordable Associated rear-wheel drive drag car with adjustable camber delivers premium features at a competitive price. With 26 precision ball bearings, aluminum shocks, and a race-inspired chassis, the DR10 Team Kit offers exceptional value for performance-focused hobbyists. Its adjustability and upgrade potential make it a smart investment for those looking to build a winning drag setup without overspending.

Ready to dominate the strip? Buy Associated DR10 Team Kit with sealed gear diff AS70027 today and experience precision-engineered drag racing performance.

Technical Description of Associated DR10 Team Kit 1/10 drag car AS70027 

Brand, Model & Product Type

• Brand: Associated
• Model: AS70027
• Product Type: Associated DR10 Team Kit 1/10 drag car AS70027, Associated AS70027 no-prep RC drag racing kit, Associated DR10 AS70027 adjustable suspension RC kit, Associated 2WD drag race chassis with big bore shocks AS70027, Associated street racing RC kit with anti-roll bar and slipper clutch

Dimensions & Weight

• Width: 27.2 cm – wide stance for drag strip stability
• Wheelbase: 32.2 cm – extended layout for straight-line control
• Length: Varies depending on body configuration
• Weight: Varies depending on electronics and body

Chassis & Suspension

• Chassis Type: Low center-of-gravity molded composite chassis
• Suspension: Fully adjustable geometry with vertical ball ends
• Shocks: Aluminum 12mm big bore coil-over shock absorbers
• Anti-Roll Bar: Rear anti-roll bar included
• Turnbuckles: Rugged steel turnbuckles for camber and toe-in adjustment

Drivetrain & Transmission

• Drive System: 2WD rear-wheel drive
• Gearbox: 2.6:1 ratio gearbox
• Differential: Heavy-duty sealed gear differential
• Slipper Clutch: Externally adjustable V2 slipper clutch
• Driveshafts: Rear CVA driveshafts for reliability

Electronics & Compatibility

• Receiver Box: Water-resistant enclosed design
• Battery Compatibility: Hook-and-loop straps support NiMH and 2/3s LiPo packs
• Motor Required: 540-size electric motor
• ESC Required: Compatible electronic speed control
• Servo Required: RT1508 Digital HV Hi-Torque Competition Servo (#27101)

Wheels, Tires & Body

• Wheel Size: 2.2" front / 2.2"–3.0" rear
• Body Required: 1/10 scale Drag Racing (No-Prep) body (#71082 DR10 Reakt Drag Body)
• Paint Required: Polycarbonate-specific spray paint
• Assembly Level: Kit – full assembly required

Hardware & Accessories

• Bearings: 26 precision ball bearings
• Hardware: Metric hardware throughout
• Optional Upgrades: Factory Team options available

Warranty

• Warranty: 1 year manufacturer warranty included

We want to make sure your delivery goes smoothly, so here are some important details about our service:

• For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
• Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
• Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
• If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
• We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
• As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
• If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
• For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.